I am stable 12h+ blend, IBT but I got random reboots just browsing www or watching movies.
I was testing all on basic system - no LAN adapters, no USB devices (and I got a lot of them).
I remember someone had same problem here but I cannot find those posts.
Any proven methods to solve it? like bump that or that? Here are some pics and settings:
Code:Processor: q9550 e0 (vid 1.25v) Ai Overclock Tuner: Manual OC From CPU Level Up: Auto Ratio CMOS Setting: 8.5 FSB Frequency: 464 CPU Clock Skew: Normal NB Clock Skew: Normal FSB Strap to North Bridge: 333 DRAM Frequency: DDR2-1115MHz DRAM CLK Skew on Channel A1: auto DRAM CLK Skew on Channel A2: auto DRAM CLK Skew on Channel B1: auto DRAM CLK Skew on Channel B2: auto DRAM Timing Control: Manual 1st Information: CAS# Latency: 5 DRAM Clocks DRAM RAS# to CAS# Delay: 5 DRAM Clocks DRAM RAS# Precharge: 5 DRAM Clocks DRAM RAS# Activate to Precharge: 15 DRAM Clocks RAS# to RAS# Delay: 3 Row Refresh Recycle Time: 55 DRAM Clocks Write Recovery Time: 6 Read to Precharge Time: 3 2nd Information: Read to Write Delay (S/D): 8 Write to Read Delay (S): 3 Write to Read Delay (D): 5 Read to Read Delay (S): 4 Read to Read Delay (D): 6 Write to Write Delay (S): 4 Write to Write Delay (D): 6 3rd Information: Write to PRE Delay: 14 Read to PRE Delay: 5 PRE to PRE Delay: 1 All PRE to ACT Delay: 5 All PRE to REF Delay: 5 DRAM Static Read Control: Enabled DRAM Read Training: Disabled MEM. OC Charger: Enabled Ai Clock Twister: Stronger Ai Transaction Booster: Manual Common Performance Level: 8 Pull-in of CHA PH1: Disabled Pull-in of CHA PH2: Disabled Pull-in of CHA PH3: Disabled Pull-in of CHB PH1: Disabled Pull-in of CHB PH2: Disabled Pull-in of CHB PH3: Disabled PCIE Frequency: 102 CPU Voltage: 1.33125 CPU PLL Voltage: 1.53975 FSB Termination Voltage: 1.365 DRAM Voltage: 2.15775 North Bridge Voltage: 1.4445 South Bridge 1.5 Voltage: 1.50 South Bridge 1.1 Voltage: 1.1325 CPU GTL Reference (0): 90 CPU GTL Reference (1): 50 CPU GTL Reference (2): 90 CPU GTL Reference (3): 50 NB GTL Reference: 60 DDR2 ChA Reference Voltage: Auto DDR2 ChB Reference Voltage: Auto North Bridge DDR Reference: Auto CPU Configuration: Ratio CMOS Setting: 8.5 C1E Support: Disabled Max CPUID Value Limit: Disabled Intel Virtualization Tech: Disabled CPU TM Function: Disabled Execute Disable Bit: Disabled Load-Line Calibration: Enabled CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled
Reply With Quote
Bookmarks