Full BIOS template for the beta bios on the
P45 T3RS

Note: not fully prime stable, 3D and OCCT 1hr stable
Code:
>CPU Feature:
 
Thermal Management Control.......... - Disabled
PPM(EIST) Mode...................... - Disabled
Limit CPUID MaxVal.................. - Disabled
CIE Function........................ - Disabled
Execute Disable Bit................. - Enabled
Virtualization Technology........... - Enabled
Core Multi-Processing............... - Enabled
 
>DRAM Timing:
 
Enhance Data transmitting........... - Fast
Enhance Addressing.................. - Fast
T2 Dispatch......................... - Disabled

>Clock Setting Fine Delay Press Enter:

DLL And RCOMP Settings.............. - Manual
Ch1 Dram Defaul Skew................ - Model 1
Ch2 Dram Defaul Skew................ - Model 1
RCOMP Settings...................... - Model 1

Fine Delay Step Degree.............. - 70ps

Ch1 Clock Crossing Setting.......... - Agressive
DIMM1 Clock Fine Delay.............. - Current[1346ps]
DIMM2 Clock Fine Delay.............. - Current[1346ps]
Ch1 Control0 Fine Delay............. - Current[166ps]
Ch1 Control1 Fine Delay............. - Current[166ps]
Ch1 Control2 Fine Delay............. - Current[124ps]
Ch1 Control3 Fine Delay............. - Current[110ps]
Ch1 Command Fine Delay.............. - Current[262ps]

Ch2 Clock Crossing Setting.......... - Agressive
DIMM3 Clock Fine Delay.............. - Current[1346s]
DIMM4 Clock Fine Delay.............. - Current[1346ps]
Ch2 Control0 Fine Delay............. - Current[14ps]
Ch2 Control1 Fine Delay............. - Current[56ps]
Ch2 Control2 Fine Delay............. - Current[0ps]
Ch2 Control3 Fine Delay............. - Current[0ps]
Ch2 Command Fine Delay.............. - Current[110ps]

Ch1 Ch2 Common Clock Setting........ - Auto

Ch1 RDCAS GNT-Chip Delay............ - Auto
Ch1 WRCAS GNT-Chip Delay............ - Auto
Ch1 Command To CS Delay............. - Auto
.
Ch2 RDCAS GNT-Chip Delay............ - Auto
Ch2 WRCAS GNT-Chip Delay............ - Auto
Ch2 Command To CS Delay............. - Auto

Flex Memory Mode..................... - Auto
Common CMD to CS Timing.............. - 2N
CAS Latency Time (tCL)............... - 7
RAS# to CAS# Delay (tRCD)............ - 8
RAS# Precharge (tRP)................. - 8
Precharge Delay (tRAS)............... - 22
All Precharge to Act................. - Auto
REF to ACT Delay (tRFC).............. - Auto
Performance Level.................... - 8

>Read delay phase adjust Press Enter:

Channel 1 Phase 0 Pull-In........... - Auto
Channel 1 Phase 1 Pull-In........... - Auto
Channel 1 Phase 2 Pull-In........... - Auto
Channel 1 Phase 3 Pull-In........... - Auto
Channel 1 Phase 4 Pull-In........... - Auto

Channel 2 Phase 0 Pull-In........... - Auto
Channel 2 Phase 1 Pull-In........... - Auto
Channel 2 Phase 2 Pull-In........... - Auto
Channel 2 Phase 3 Pull-In........... - Auto
Channel 2 Phase 4 Pull-In........... - Auto

Write to PRE Delay (tWR)............ - Auto
Rank Write to Read (tWTR)........... - Auto
ACT to ACT Delay (tRRD)............. -Auto
Read to Write Delay (tRDWR)......... - Auto
Ranks Write to Write (tWRWR)........ - Auto
Ranks Read to Read (tRDRD).......... - Auto
Ranks Write to Read (tWRRD)......... - Auto
ALL PRE to Refresh.................. - Auto

>Voltage Settings:

CPU VID Control..................... - 1.25V
CPU VID Special Add................. - Disabled
CPU VID Special Add................. - 113.22%
DRAM Voltage Control................ - 1.87v
SB Core/CPU PLL Voltage............. - 1.75v
NB Core Voltage..................... - 1.55v (1.47v actual)
CPU VTT Voltage..................... - 1.58v
Vcore Droop Control................. - Disabled
Clockgen Voltage Control............ - 3.45v
GTL+ Buffer Strength................ - Strong
CPU GTL 0 REF Volt.................. - 0.6725
CPU GTL 2 REF Volt.................. - 0.6725
CPU GTL 1 REF Volt.................. - 0.6725
CPU GTL 3 REF Volt.................. - 0.6725
North Bridge GTL 0 REF Volt......... - 0.6750
North Bridge GTL 1 REF Volt......... - 0.6750
FSB Vref............................ - Auto
 
Genie BIOS Settings:
 
Exist Setup Shutdown................ - Mode 2
Exist Shutdown After AC loss........ - Enabled
AC Shutdown Free.................... - Enabled
O.C Clock Fail Retry Counter........ - 1
O.C Clock Fail CMOS Reloaded........ - Disabled
CPU Clock Ratio..................... - 9
Target CPU Clock.................... - 3800 MHz
CPU Clock........................... - 482
Boot Up Clock....................... - Auto

CPU Clock Amplitude................. - 900mV
CPU Clock0 Skew..................... - 100ps
CPU Clock1 Skew..................... - 100ps
DRAM Speed.......................... - 400/1066
Target DRAM Speed................... - 1284MHz
PCIE Clock.......................... - 101mhz