Quote Originally Posted by gOtVoltage View Post
Thats the Wrong PCI-E watt limit your adjusting.. The correct one will be preset @75watt...I believe its Lane #2 and #10..Just go throught each and only set the ones that ALLOW 16x. There will only be two lanes that run 16x.

NOTE:
In the same Menu pressF4 and 10 new PCI-E lanes will pop up on screen..

Two of those lanes Are X16lanes ...I set those to 200watts and AUTONONIMOUS.. I leave all other Lanes AUTO.

Also VDD is the BASE Volts for the Mobo.. The Higher You raise this the More Overall Volts you can achieve with VCORE and ACC.

I allways run @2.8v VDD.. 2.5v is default when on Auto.. Setting to 2.8v garentees that it wont Drop below 2.8v when overclocking..


.Also you Should Disable ACC and set 2.8v VDD for now and Manually Raise the Vcore For CPU/Nb slowly to see what makes its stable..This way you Know ACC isnt causing the Reboot...

Many things can Happen IF,,

If volts tooHIGH/LOW can reboot.
If CPU too HOT can reboot>
If the HT is too high it can reboot .
IF the NB is too High it can reboot.
If Ram timing is wrong can reboot.
If power supply is weak Can reboot..
thats just a few things to mention.

For a stock Phenom i would not use less than 500wattpsu that has a 8pin on it with at least 36amps on the Rail.

Try setting just the CPU Multi with Stock NB and NB 1.35volts ..On stock cooler you should be able to do 3.1/3.2ghz but will need to play with CPUvolts and Id use the 800ram or 1066ram divider if you have 1066..
Very nice tips again! Thanks. Sorry for all these questions, have to learn .. things.. to clock..

But yes, the F4 would be the answer, I was trying to find those lanes which are in the manual too, but couldnt.. F4 solves this I think. So 200W for them and ACC off .. hmm Ill try. I have Arctic Cooling A64 Freezer pro doing the cooling now. Btw, new Enermax 525W Modu82+(3x25A rails) PSU coming this week too, maybe helps, maybe not, ready for CF then if not.

This Antec NeoHE380W has got some great performance in the past in some tests so I dont think its the fault now altought.. But never know!
It has 3x15A 12V rails .. not sooo bad, but if the phenom just draws some power what you can do. ..

But thanks very much.