Almost complete: Chop-top shuttle: with more hardware than it should have ;)56k warn.

[cirthix]

pics now half-sized

Been working on this one for a while. I'll let the pics explain things.

Things that still need to be done:
1: make/enlarge the vent for the cpu air intake
2: eliminate the small ~2mm gap between the sidepanel and front of the case.
3: fill the gap in the front of the case
4: find where a reset button can be attached to the motherboard and use the lower button on the front panel for reset.
5: add wireless antennae and mini-pcie slot
6: replace 120mm fan with a pwm one.
7: remove disk activity and eject logos from front plexi

Specs:
Q6600@3.2ghz 1.42v (3.6 ok too)
8gb ocz ddr2-1000
evga 8800gt (stock cooling)@720/1800/1900
750gb samsung F1+4gb software ramdisk (boot+apps)
520HX corsair power supply

All crammed into a p35 SHUTTLE!

pics unordered. The hdd sitting on the psu is temporary, only the one in the front is meant to be there.