Perhaps, it is modPi 8M WR : 01m40.750s by E8500 & TP45 HP

[NewBeetle]

Thank you so much for your advice, Team.AU !

modPI 8M : 1m40.750s @5932.2MHz (FSB624.4MHz x 9.5)


Setup


M/B: BIOSTAR TP45 HP Ver.5.0 Vcore-mod (BIOS:P45BA624.BST)
M/B Bed: V-TEC ARC Bed Rev.5.3
CPU:Core2 Duo E8500 Q813A227#1(2V81209)
CPU cooling:MaxxNeo + LN2 / Temp:-135C
Chipset Cooling: Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2
VGA:MSI NX7900GTO 512MB PCI-EX
HDD:Maxtor 6Y080P0 (IDE)
PSU: SilverStone OP1200
OS: Windows Server 2003
Tools: SetFSB / Memset3.5 / P965StrapTweaker(04-10-03-22-08) / ERAM2.11 / AutoGear

[BIOS SETUP]　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 570
Over Clock Retry Count : 2
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1140
DDR2 Enhance Mode : Enabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Disabled (4-4-4-10-6-26-4-4-4)

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6000v (Actual:1.87V)
DDR Voltage : +0.700v (Actual:2.67V)
Chipset Voltage : +0.350v
FSB Voltage : +0.350v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v