Quote Originally Posted by slim142 View Post
Guys, I need some serious help right now cause I think I found the problem on my motherboard
According to what I have checked and reviewing here, I think my problem is the droop of voltages while in idle.
So please help me on this, I need to know what voltage droop causes the system to freeze and sometimes to restart so here it goes

vcore= Yes this could be the one, maybe?
PLL= This was the key for me to achieve stability on 0804, maybe adding a little more will finally let me be stable on idle?
VTT= How do you know you need more VTT? freezes? BSoDs? 1.30 (1.33 real) is what I have needed so far. dont know if I should increase this (Im almost on border line=1.36)
Memory= well, all I know is that if this was the responsable for my problems, I would get BSoDs. Could this be the one?
NB= In load 100%, but could this cause inestability in idle? I seriously dont know what to say here
SB= I have it in 1.50, is there any chance I would need more than 1.50? Im not using Tri-SLI, but all 6 SATA ports are in use, maybe this is the responsable since it has to handle a lot of hard drives? unsufficient power?
So far I think is the SB, as far as I can tell, prime95 doesnt stress the hard drives or the SB as much as it does to the NB, and this might be the reason why Im not stable specially since Im using all SATA ports.

Ok , Im not covering my eyes and trying to think that I have the perfect board and I just need to find the right voltages. I am 100% stable in Load, but I sometimes freeze in idle and I came to the conclusion it could be because of the sudden voltage droops.

Anybody think they can help me out on this one before I end up RMAing the board, I would really appreciate!
From my reading here and elsewhere, having LLC enabled is most often the cause of "idle freezing/crashing/BSODs." Anandtech cautions against its use here for just that reason.

Do you have LLC enabled?

H