"705.5*8 with Biostar I45..This time on LN2 "

[hey]

My Biostar I45 just arrived yesterday, since we didnt order LN2, i just checked fsb on air. It was able to set up to 668MHZ but i wanted to record vid of it so 662 was enough

here is the result of air cooling and vid of it..( sure i will push it more with my friends)

video of it
http://video.donanimhaber.com/avc-vi...0&categoryid=0

http://valid.x86-secret.com/show_oc.php?id=382146






SETTINGS

M/B : BIOSTAR TP I45 (BIOS:P45BA620.BST)
CPU : Core2 Duo E8500(ES)
CPU cooling : Zalman / Temp:56C-80c
Chipset Cooling : old socket A nb heatsink + amd 939 stock fan
Mem : Corsair+kingstone PC2-8500 C5 512mb
VGA : 9600gt PCI-E
VGA Cooling : Stock
HDD : Seagate 320gb ide
OS : Windows XP

[BIOS SETUP] O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×6
CPU Frequency Setting : 615(boot)
Over Clock Retry Count : 3
FSB(Bsel) To NorthBridge Latch : 1333
DRAM Frequency : DDR2-1230
DDR2 Enhance Mode : Disabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : AUTO or 1 ,cant remember
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Disabled (5-5-5-15)

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : Auto
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.4000v
DDR Voltage : +0.700v
Chipset Voltage : +0.500v
FSB Voltage : Auto
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v

(i again used NB's writing as template