-
Running Bios v0812, and everytime i shut down for a min or 2, it tells me Overclocking failed even at stock settings with minute changes, could someone tell me what i need to do ?
E6750 (liquid cooled)
8800gt
ReaperX PC8000 2x2gb (black slots) set at 2.2 volts.
620HX
Samsung t1 f1
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control:Auto
FSB Frequency: Auto
PCI-E Frequency: 100
Dram Command Rate [N2]
DRAM Frequency: Auto
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 18
TWR: Auto
TRFC: Auto
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Disabled
Transaction Booster: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: [1.4000v]
CPU Voltage Reference: Auto
CPU Voltage Damper: Auto
CPU PLL Voltage: Auto
DRAM Voltage: 2.20
FSB Termination Voltage: Auto
North Bridge Voltage: Auto
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
clock Over charging voltage: Auto
Load Line Calibration [Enabled]
Advance CPU Settings
CPU Ratio Control:Auto
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Last edited by rip[tor; 05-04-2008 at 06:21 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks