Quote Originally Posted by KTE View Post
Idle+Load 24/7 Stability
2.8G was not stable - it froze after 16 hours during WISE. I jumped MHz.
froze after 2hrs here 1.325V is what i use atm.
Quote Originally Posted by KTE View Post
2.9G was no go at 1.4v real, fails WISE stability after 8 hours although can bench easily.
Behaved unstable here at 1.4V. Prime ran fine for a few minutes but sandra prozessor arithmetic benchmark froze the machine even at 1.425.
Quote Originally Posted by KTE View Post
1.4v 2.9G did not even boot with CnQ turned on. Disabled it then.
.
Hmm on the DFI mobo I can set CnQ and voltages to Auto and use a cpu multi suitable for stock voltage and the given ref HT.
Voltages and he multi can be modified via msr registers then.
The PC must be in Desktop mode however if ref HT x stock CPU multi exceeds the max the CPU can handle at stock volts.
Quote Originally Posted by KTE View Post
3G 1.552v idle is 97W DC for CPU, which is what I'm at now. I have tried enabling CnQ and am successfully running it right now at 400MHz 0.7v with 3000MHz 1.552v being the load setting. CnQ gives me 12W DC idle CPU power.
For the record you use the wattages from everest odin readings?
Quote Originally Posted by KTE View Post
Some [totally unoptimized] 3G benches FYI:-
Always good for a platform comparison.