Maximus Formula GSkill 8500 Won't Post With 2 RAM Sticks

[Lestat]

2.1 isnt enough i do not think.

both sets of my gskill and a crucial ballistix need more voltage on this board than any other board to boot properly.

frankly i think the ram overclocking on the maximus sucks big balls.
i have yet to see a board overclock any of my ram as good as my P5N-E SLI did.
it would run 1200mhz 5-5-5-15 w/ 2.23v

no other board i have tested can do that at even 2.3v with the same ram. and i have tested alot of boards.

try this

USE THE WHITE SLOTS ONLY

Ai Clock Twister : AUTO - ENABLE
Transaction Booster : AUTO - Normal Level 0 (i think thats what its call i cant remember)
CPU Voltage : AUTO
CPU PLL Voltage : AUTO
North Bridge Voltage : AUTO
DRAM Voltage : 2.10 - 2.2
FSB Termination Voltage : AUTO
South Bridge Voltage : AUTO
Loadline Calibration : AUTO - ENABLED!!! - people say this messes with OC i say bullcrap, without it droop is massive and irratic
CPU GTL Reference : AUT x67 or x63
North Bridge GTL Reference : AUTO - x67
DDR2 Channel A REF Voltage : AUTO DDR2 REF or +10mv
DDR2 Channel B REF Voltage : AUTO DDR2 REF or +10mv
DDR2 Controller REF Voltage : AUTO DDR2 REF or +10mv
SB 1.5V Voltage : AUTO