evil's Work Rig Build (lots of pic)

[Talonman]

heres some OCing for today

no idea how stable i am here.. rebooted once.
also whats the benefit to going 1:1 ratio? im
just underclocking the ram. is there any way i
can stress test a all 4 cores at once? i did it
with ortho with 2 seperate once and set
affiliations between the cores that worked for a
few minutes but the program picked it up and
locked up. im just rendering as a test. which
is not sufficient. as you can see NB temps have
dropped which is nice DRAMv has lowered too
but thats underclocked

CPU idles at 20c loads at 30c says probe
CPU idles at 32-30-27-27c loads at 45-42-42-38c says coretemp
CPU idles at 20c says bios

You might try upping your NB voltage for better system stability. Yours looks a little low compared to the other boys running an OC'ed Maximus.

Members reported loaded NB temp's using the stock 'Republic of Gamers' cooling:
ROG Member ----- NB volts -- NB Loaded -------------------------- CPU ------------------
bill d ------------- 1.30v ------ 34°C ------------------------------ Q6600 @ 2.4GHz
TheSamuri -------- 1.54v ------ 34°C -------------------------- Q6600 GO @ 3.9GHz (Reseated W/MX-2, NB was 48°C)
Renegade5399 ---- 1.65v ------ 34°C --------------------------- E6850 GO @ 4GHz
ragge86 ---------- 1.65v ------ 36°C ------------------------------ Q6600 @ 3.8GHz
initialised --------- 1.52v ------ 39°C --- After 10mins of SP2004 ---- E4500 @ 3.2GHz
NysoO ------------ 1.60v ------ 39°C -------------------------- Q6600 GO @ 3.6GHz
raju -------------- 1.65v ------ 39°C --- Prime95 Torture Temp ---- Q6600 @ 3.6GHz (Reseated W/new TIM, NB was 49°C)
DerekFSE --------- 1.50v ------ 40°C -------- Running Orthos ------ E6400 @ 3.6GHz
BulldogPO -------- 1.65v ------ 40°C - 24/7 QMC crunching clocks -- Q6600 @ 3.8GHz
giorgos th. ------- 1.47v ------ 41°C ------------------------------ Q6600 @ 3.60GHz
Aldy402 ---------- 1.63v ------ 43°C -------------------------- Q6600 GO @ 3.825GHz (NB was 62°C-65°C, loaded on air)
weescott --------- 1.74v ------ 43°C ----------------------------- Q9550 @ 3.8GHz
j0nnyr0773n ------ 1.54v ------ 44°C -------------------------- Q6600 GO @ 3.6GHz
Clump ------------ 1.62v ------ 46°C ---- After 1HR or Prime 95 ---- Q6600 @ 3.6GHz