Results 1 to 7 of 7

Thread: Minsk XTReme mkII (-13*C @ 605W)

Threaded View

  1. #1
    -100c Club Member
    Join Date
    Mar 2005
    Location
    Poland
    Posts
    1,290

    Minsk XTReme mkII (-13*C @ 605W)

    Hello

    That's chiller for mine good friend PMP . He want to cool using it whole config like :QX CPU (QX6850ES now), 2* 8800 ULTRA, Asus Striker mobo - as You can see quite hot stuff . That's second edition of his chiller, first was build on smaller aspera compressor, and small condensor and just can't cope with so huge load :-/ . So I decided to built it completelly new.

    Name of chiller is taken from legendary (in Poland) russian refrigerator .

    Specs :

    compressor: Rotary 6826 BTU
    heat exchanger: plate HX 12 plates
    XV: Danfoss TS2 + Frigomec 0.88l receiver
    condensor: 1.9kW cooled by orginal 230V fan
    refrigerant : R134a (finally)
    case: metal case 46 x 46 x 46 cm, black powder coating
    others: electronic controller Dixell XR20C, one 230V fan 250mm on the back of case, Laing D5 pump, Swiftech small reservoir.



    Laing D5 + Swiftech res. .













    Around -30*C with no-load on pure R507 .



    Power consumption when chiller is cooling liquid , as You can see on pic rotary musn't be so hungy .







    -13*C liquid on 605W heater . Pure R507.



    Finish .





    Chiller has been on one polish ocer meeting in Gdansk . There is had been cooling Asus Striker mobo, liquid was around -25*C all the time .



    But condensation with R507 was too big, liquid was just WAY too cold . So decision to try R507 and 134a blend. Temp on 605W load with that blend.



    But for owner...it was too cold still . So finally I put pure R134a, temperatures are like +2*C@605W .

    I hope that owner will post some pics here in future .

    Regards
    Peter
    Last edited by piotres; 10-04-2007 at 12:54 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •