Originally Posted by boostedevo
I am trying to confirm if some of these mods are the same for the P5K Prem too. The board layout and components seem identical to the Dlx, but use diff brands.
Can someone with a Dlx measure the PLL and FSB VTT points and tell me what readings you get at minimum BIOS setting for them (not AUTO) and then 1 or 2 steps up? Neither of the voltages I measure on those legs on the Prem ever change no matter what I set the Vpll or FSB Term to in BIOS. No one else here seems to have done the mods on a Prem yet, so I am curious if I just need to look for different measure points on the Prem or if I need to dig further than that.
See my thread here for additional info/pic of the Prem board if you can help out
You should try to do vsb mod, cause your vfsb read point is actually SB readpoint. (in your thread -picture 1) Mod point is under the PCI-E connector.
Vpll mod is working right on my P5K dlx, so maybe you just try it on premium and let us know if it works. If I remember right, the ohm value in mod point was 1.1Kohm. I have the right values somewhere if you need them.
Reply With Quote
Bookmarks