My p5w dh seems to be stuck at fsb360.
I have a week 27 e6700 and i'm running the following bios settings:
ai overclocking to manual
cpu freq 360
performance mode standard
pci express freq to 101
pci clock synch mode to 33.3mhz
mem voltage to 2.20v
cpu core voltage 1.55 or 1.53
fsb term voltage 1.5v
mch chipset voltage 1.65v
ich voltage 1.20
on cpu config page
disable all except microcode updation
on chipset page
config dram timing by spd set to manual, running 4-4-4-12 as per spec of the ram
dram ecc to disabled
hyper3 disable
dram throttling disabled
leave other stuff on auto
ram is running 1:1 but at 266fsb i can run it at 800mhz without probs so the ram is not holding me back.
i've bumper vcore to 1.6 but i can never get a decent boot on 370fsb.
it's 100% stable on 360 (4+ hours bf2)
my p5w dh is a very early one.
I followed the sticky and took all caps of the heatsinks, removed all thermal paste and replaced with as, heatsinks have good contact.
I have fans on the mem and nb, case has very good cooling with additional top fans (2x120)
what can i do to get a higher fsb?
I'd like to run 4GHz (fsb 400)
running bios 1101
Reply With Quote
Bookmarks