Im real sorry about this being off topic but can someone lead me to were i can find this on a NF3 250GB thanks
Quote Originally Posted by EMC2
Thanks for the input Skip! Hope you don't mind me bringing your post over here

Don't you just hate those long turn-arounds (well, missing a weekend makes it seeeeeeem long, lol).

Just an FYI... I would suggest you go into the BIOS and setup the MB with slow clocks (say 2.5,4,4,8 and FSB <= 166Mhz 1:1) when you first get the new MB, then after you've successfully booted up and it has saved the settings in CMOS, *reboot*, go back into the BIOS and turn off the "autosave last bootable settings* in the BIOS. Then as you're going up in your OC'ing, periodically save a setup in one of the CMOS Settings slots with the description fields and set em up to function keys (mine are F1, F2, F3). That way if you run into problems, bad settings, whatever, you have your tweaked settings saved just a Function Key away, plus your "auto restore" setting is loaded with a nice "failsafe" setup (which it loads if you do the "Safe Boot" jumper thing).

Oh, regarding those measurment points... below are annotated pics showing Vmem, Vcore, & Vtt measurement points... along with others. If you (or anyone else) has their DFI Nf4 croak on them, please measure all indicated points before you ship it off and postie here

Best of luck and Happy Hunting with your new board Skip

[edit...ooops, forgot the pics, ]


[edit...added Chipset Voltage]