Quote Originally Posted by Whap
Hi Thanks for the replies was actually driving me quite nuts with about 200 clearing of the cmos I think I will leave it at 1/1 makes life all so much easier.

Have found that the crucial ballistix scales nicely 11 x 264MHz 1/1 @ 2.5 / 3 /3 / 8 / 2T – 1T goes out the window after 250MHz.

One other slight annoyance soz if it’s already been covered but my Optical mouse stays lit when the system has been powered off, is this normal, but on a plus note I can find the computer in the dark

Thanks Whap

-----------------------------------------------------------------
I also have the cold boot problem.
I have found that increasing the AGP voltage(I'm now at 1.85V) helps to increase maximum bootable HTT, also disabling all non used onchip features
such as S-ATA, firewire etc helps a bit. You could as I do use Clockgen to set
higher HTT after you have loaded windows and before you shut down you set it to a lower vaule again.