G.Skill F1-4800DSU2-1GBFF DDR600 @ 5-3-3-2.5 results.

[formyfaith]

Bellow are my G.Skill 1GB FF results.

G.Skill rocks!

Test Rig:
- AMD San Diego 3700+
- DFI Ultra-D with 615 BIOS
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm

[metro.cl]

nice sticks!!! really good ones

[[XC] moddolicous]

Nice results. Now get them crunching for D2OL. BTW, is that the max, or can the go to like 320-330?? Try raising the read preamble to 6.5 and the max async latency to 9. Not much loss in sandra, and usually allows for higher overclock.

[cupra]

Bellow are my G.Skill 1GB FF results.

G.Skill rocks!

Test Rig:
- AMD San Diego 3700+
- DFI Ultra-D with 615 BIOS
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm

nice one ! i miss some info so :
1) is that a 440 tccd ?
2) how much voltage you need to do 300mhz 2.5-3-3 ?
3) that 300mzh pass memtest and can be 24/7 clock ?


thanks

[formyfaith]

Nice results. Now get them crunching for D2OL. BTW, is that the max, or can the go to like 320-330?? Try raising the read preamble to 6.5 and the max async latency to 9. Not much loss in sandra, and usually allows for higher overclock.

Haven't tried yet
BTW I don't like loosening specific parts for ram settings, because I loose
pi value, but thanks for the advice and will try later.

nice one ! i miss some info so :
1) is that a 440 tccd ?
2) how much voltage you need to do 300mhz 2.5-3-3 ?
3) that 300mzh pass memtest and can be 24/7 clock ?


thanks

1) yes 440 tccd
2) 2.9V
3) yes it passes memtest, and 24/7 is possible.


Bellow is a updated pi screenie with better tuning.

[babyelf]

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

[s7e9h3n]

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

This is true....your OC will start diminishing if you use that high a Vdimm. Here's my FF's @ 2.73:

[formyfaith]

hmm tried lower vdimm? read somewhere kakarato said not to use too high on the FF..

I think it differs on what CPU you're using.
With an other clawhammer core CPU I can lower the vdimm to 2.8V.

This is true....your OC will start diminishing if you use that high a Vdimm. Here's my FF's @ 2.73:

I've been using some other TCCD rams at 2.9V for more than half a year,
and no problems yet.

[s7e9h3n]

I think it differs on what CPU you're using.

With a clawhammer core I can lower the vdimm to 2.8V.



I've been using some other TCCD rams at 2.9V for more than half a year,
and no problems yet.

Well, the info is straight from OPB, but you can do whatever you like with your memory

[formyfaith]

Well, the info is straight from OPB, but you can do whatever you like with your memory

Then for just in case,
Think I'll also need to find loosened specific settings with lower vdimm
since FF is indeed expensive. Thanks

[htkm1]

This is true....your OC will start diminishing if you use that high a Vdimm.

Is it permanent or Temporary?

[s7e9h3n]

Is it permanent or Temporary?

PERMANENT