Xtreme Twinmos Memory!

[TEDY]

think we got some TWINMOS SPEED PREMIUM ...gotta check it...damn 25km driving

and cheap too

50$ 256MB
105$ 512

cheap compared ordering etc...

[Mowgli]

The VTT is usually good to track well up until 3.2v-3.3v, even on the normal IC7, so the booster can help you up to there, the VTT mod isnt 100% neccesary either, you can still run voltages higher then 3.2 with stableness, only maybe not as stable as it would be with the VTT tracking correctly.

really?in that case, i wont owrry too much then....3.3/3.2Vdimm with BH5's shud be good enuff....

btw, u got any official source where i can refer to bout this?

[Revv23]

you can probably check the booster compatibility thread, im fairly sure its in there...

http://www.xtremesystems.org/forums/...z+booster+work

[seldomsean]

think we got some TWINMOS SPEED PREMIUM ...gotta check it...damn 25km driving

and cheap too

50$ 256MB
105$ 512

cheap compared ordering etc...

Damn Tedy...I feel for you as you have followed this thread the whole
entire time and have yet got yourself some dimms to test

Good Luck

[Redskin]

I've tested DC, CPC on, not stable with 225 FSB, in SC with one stickin slot 3 running memtest @ 242 x 11 @3.15 vdimm for one our without errors.
(Bios TicTac D26XT)

[seldomsean]

I guess I'm off your Christmas card list ?

If you re-read my original posts you'll see the next thing for me to drool over is faster memory than bh5 / VX is at present and of course this just matches it, at cheaper cost but higher risk. That's all I said, no less, no more.

Unless you have no memory at present or are heavily into benching, rather than overclocking, then I see little point in spending extra money $$ getting memory that will do 2-2-2-5 rather than 2.5-3-3-7 , you are better putting that money to a video card or cpu, because I doubt you will notice $$ difference in game X or application Y.

I do realise though that not going with the crowd I might be laughed at, but the fear of that is not enough to stop me saying what I feel

Anyhow, I'll bugger off now and moan about the weather and young people to my mate Grandpa Simpson ....

Regards

Andy

Well andy, I apoligise for sounding like an A$$ in that post and im sure
your reasons are valid for not Jumping at this stuff...

Cheers to you for your post and speaking your mind...

And yes you will get your X-Mas card next year

EDIT: Send me a PM and i will ship my 256 stick to you for testing
and you owe me nothing... Here is what i got from it...

[TEDY]

redskin give it 3.3vdimm

you should reach 250-255

[Redskin]

redskin give it 3.3vdimm

you should reach 250-255

I would give 3.3vdimm but it's not possible because there is no vtt mod, I'm going to do this tomorrow. up to now 3.15 is the max vdimm I can give.

[zakelwe]

EDIT: Send me a PM and i will ship my 256 stick to you for testing
and you owe me nothing... Here is what i got from it...

Nice speed

You do not have to send me any sticks as I have some 4 on order, I tend to collect RAM like I do nvidia video cards, thanks for the offer though.

Only 300 1:1 2-5-2-2 will get me excited though, that's like Viagra to us old guys with our X year old sticks of bh-5

Regards

Andy

[TEDY]

makes sense yeah....

so dual channel 2*512 not stable even 225mhz only at 3.15 ? that's bad

well "burn in" them.....fan blowing etc......GL

[Redskin]

makes sense yeah....

so dual channel 2*512 not stable even 225mhz only at 3.15 ? that's bad

well "burn in" them.....fan blowing etc......GL

yo dc not stable at 225, but not munch tested so far, only single channel 242 @ 3.15vdimm with one stick, gonna test the other stick in single channel too.
nforce2 with 2x512 really sucks for me
did burn in already (9 Hours)

[TEDY]

only comforts me it's you got sucky mobo and me some ownage NF2 one :=)

j/k :

[seldomsean]

Nice speed

You do not have to send me any sticks as I have some 4 on order, I tend to collect RAM like I do nvidia video cards, thanks for the offer though.

Only 300 1:1 2-5-2-2 will get me excited though, that's like Viagra to us old guys with our X year old sticks of bh-5

Regards

Andy

You do not have to send me any sticks as I have some 4 on order, I tend to collect RAM like I do nvidia video cards, thanks for the offer though.

Thanks Bro...

I see you have been bitten by the "Bug" Also

Look forward to seeing your result's(Kinda like Gambleing)


I do know that if "twinMOS" does what there sayin here then this ram
should be "Flooding"the market so to speak so there isnt any rush to
go and order this stuff...Actually it might payoff to wait and see what
happens...

Cheers,
-Sean

[scifikg]

Newegg has the 512 SP back in stock! ----> link

[sparkie34]

7pm est they only have 2 left in stock. If you want them, NOW is the time.

[WesM63]

My 256 isn't doing so hot, with 3.3vdimm I can only manage 245mhz 2-2-2-5 1T 3.3v memtest stable. However I can bench at 250mhz stable but it don't pass memtest or super pi.

[sparkie34]

My 256 isn't doing so hot, with 3.3vdimm I can only manage 245mhz 2-2-2-5 1T 3.3v memtest stable. However I can bench at 250mhz stable but it don't pass memtest or super pi.

Are you able to give it 3.4-3.6v ? That seems to be the sweet spot for these sticks.

[sparkie34]

Newegg has the 512 SP back in stock! ----> link

LMAO.....7:10pm EST and the last 2 sticks are gone.

[WesM63]

Are you able to give it 3.4-3.6v ? That seems to be the sweet spot for these sticks.

Sure can, well I think anywase, I don't know if this board has any OVP or not. I'll try running 3.6v through it and see what happens.

[pik-ard v1.1]

DAMNIT, missed the sticks, got an instock email at 3:37 this afternoon... got home from work at 8:20, and they're gone..

EDIT: haha! things went back in stock at around 9:10, and i got me 2 from newegg!

i just did FedEx express saver, 3-4 bussiness days, but newegg doesnt process on weekends, and they need 24-48 hours processing time, so that sounds like next thurday. tis ok, i dont have the rest of the system anyways.

[situman]

well sad to say, I tried max of 3.2vdimm and it didnt get me anywhere with 2*512. I think the AI7 undervolts. freaking thing wouldnt even post if I try even 220 2228 timings. I guess volt modding is really needed for this one.

[Reefa_Madness]

well sad to say, I tried max of 3.2vdimm and it didnt get me anywhere with 2*512. I think the AI7 undervolts. freaking thing wouldnt even post if I try even 220 2228 timings. I guess volt modding is really needed for this one.

Well, you are not alone in your woes. I'm in the process of doing a burn in because I wasn't having a ton of luck right out of the box. No DC at 200 with 2-2-2-5 for me, even at 3.2v! (Correction, that should read at 3.3v, not 3.2v).

I do have another factor at work for me here besides the ram and that is that this is a new build I'm using to test. The OCZ PC2700 sticks wouldn't boot in DC either, and I'm getting Memtest errors with some TCCD, as well. While these Speed Premiums are doing a burn-in, I'm putting together another rig to help determine if it is the sticks or the rig.

On a side note...so far it appears that those back in stock emails go out just after 6:00 pm EST, so if you are in the market for TMSP, keep checking the stock beggining sometime after 5:00 pm. And keep checking!

I am basing that last comment on observing date/time stamp on the "back in stock" posts made here, as well as over at OCF. May or may not be true, but appears to be the pattern.

[$ilver]

some guys @ hardwareluxx.com said , that the UTT's doesnt perform well @ s478 ...

[Reefa_Madness]

some guys @ hardwareluxx.com said , that the UTT's doesnt perform well @ s478 ...

Hipro5 posted decent results on an Intel back on page #5 and another guy, Diablo23RD over at OCF has hit 250 plus with his on an IC7-G/3.2 rig, but yes, most of the better results have been a64 rigs.

The OCZ VX also works better on A64 so there may be something to that. It is very possible that those same sticks that Diablo hit 250 plus on would do 270 plus on A64 and I do believe that hipro's sticks did better on A64 as well.

[Bluebeard]

i also had no luck running 2x512MB TwinMOS Speed Premium 250 2-2-2-5 @ 3,3 on a P4C800-E PAT enabled while they did 260 2-2-2-5 1T on K8N Neo2 also @ 3,3