LittleDevil LD PC-V8 Reverse ATX/HPTX

[LittleDevil]

I would like to show you first sketches of Reverse ATX/HPTX case with 10 PCI slots and space for 3 x 480mm radiators inside.

LittleDevil PC-V8 Reverse ATX/HPTX Watercoolig PC case

* 10 x PCI slots
* space for 5 x HDD on anti vibration legs
* 4 x 5.25 slos
* space for PSU and watercooling in the bottom
* all screws for motherboard, DVD's, PCI cards....etc
* antivibration screws for HDD's
* 2 illuminated switch for power on/off and restart with cables
* space on the bottom for 2 x 480mm or 2 x 360mm radiators with 2 x L holders (adjustable)
* on the top of the case, space for 480mm radiator (4 x 120mm)
* support for all motherboards
* support for EVGA SR2 motherboard
* dual PSU support (optionaly)

Case will be ready in about 1 month.

Pics:



Dual PSU support (optional).



SSD's on motherboard tray.



Colour available:

Black - 4way tray
Black - SR2 tray
Black/Red - 4way tray
Black/Red - SR2 tray
Black/White - 4way tray
Black/White - SR2 tray
Red - 4way tray
Red - SR2 tray

Kind Regards

[LittleDevil]

Here are pictures of black case.





ALU Legs.





SSD's




















Dual PSU Support:





Kind Regards

[LittleDevil]

Reserved...

[tom1]

I waiting 1 month

[shetlander]

Just a suggestion LD but why not try the PSU above the PCI slots. This would give room for upto 2 149mm x 4 rads in the bottom and a 120 x 3 rad in the top (part of the rad being above the 5 1/4 drives.

[Elmy]

Lookin good. I'm working on gettin money together for one of these.

[LittleDevil]

Pics added into post 2.

Link: http://www.xtremesystems.org/forums/...73&postcount=2

[RCG_Bex]

Very nice. I do really like these cases. I personally would prefer if the bottom section was bigger for stacking rads like you can in the V2000

[[XC] Synthetickiller]

Loving inverted ATX. Just beautiful. Also the dual PSU is a huge plus for all those tri/quad SLI /Crossfire set ups!

Why still have the HDD cage face in the other normal direction? Just keeps cost down? Seems a little troublesome for those who swap drives a lot.

One more question. Any plans for a removeable motherboard tray? Allowing atx or inverted ATX would rock most people's socks off!

As usual, I'm loving your work!

[LittleDevil]

Loving inverted ATX. Just beautiful. Also the dual PSU is a huge plus for all those tri/quad SLI /Crossfire set ups!

Why still have the HDD cage face in the other normal direction? Just keeps cost down? Seems a little troublesome for those who swap drives a lot.

One more question. Any plans for a removeable motherboard tray? Allowing atx or inverted ATX would rock most people's socks off!

As usual, I'm loving your work!

Thanks.

HDD cage is removable and you can rotate it, so if you swap drives alot you can rotate it.

Motherboard tray is removable

[[XC] Synthetickiller]

Thanks.

HDD cage is removable and you can rotate it, so if you swap drives alot you can rotate it.

Motherboard tray is removable

Haha, forgive me. I didn't notice.

BTW, any chance of getting it to distributors n the US?

[LittleDevil]

SR2 motherboard tray.

More pics of different colours tomorrow.

[LittleDevil]

Black with red interior:











Kind Regards

[gatecrasherlok]

Oh wow that is very neat indeed. loving the intervted motherboard tray.

[LittleDevil]

Oh wow that is very neat indeed. loving the intervted motherboard tray.

Thanks

[Buckeye]

Looks great LD !

So is that a 4 way & 3 way Rsd's that fit in the bottom ?
Its a bit confusing, to me at least. Looks like 2x 3 way Rads in the bottom area.

[LittleDevil]

Looks great LD !

So is that a 4 way & 3 way Rsd's that fit in the bottom ?
Its a bit confusing, to me at least. Looks like 2x 3 way Rads in the bottom area.

Thanks.

In the bottom is possible to place 2 x 480mm radiators and 1 x 480mm radiator on the top of the case.

Kind Regards

[owikh84]

I'm officially owning this Devil... from Slovenia to Malaysia...

Hook up LianLi's case feet...


LD vs TJ07...


Thanks Ales for such a great case!

[LittleDevil]

Really nice pics there, it looks fantastic and really big compared to TJ07 Please show us some pics of build-log too.

Kind Regards

[LittleDevil]

LD PC-V8 Reverse Black-White































SR2 tray:

[Church]

LittleDevil: what do you think of uniting all threads about different your case variations into one? Or at least two, with 2nd being phase cooling one? Imho they all have many common things, and it probably is PITA to post news relevant to all of them in each of the threads.
Also imho you should add some extra numbers or letters to case version, so that user can easier distinct which version he can buy @all the different shops without inquiring shop for details. Eg. one letter for reverse one, one for SR-2 support, one with new cable management cuts and so on. Something like LD PC-V8.3 or LD PC-V8RSC.

[LittleDevil]

If you look little better you can see:

Reference : PC-V8-BW-4W-RE
Reference : PC-V8 BW-SR2-RE

Kind Regards

[zalbard]

Your cases keep getting better and better!
I really like the black and white version.
Now I just wish you used different fan grills, and it'd be perfect!

P.S. Any reason why the bottom part's so tall? I assume it's because it shares the same structure with your Phase Case. Radiators don't really need nearly as much height. Can put dual PSUs like this (more reliable with them both sitting on the floor, too), reduce the case's height, and thus make the case not quite as tall, lighter, and possibly cheaper.

[LittleDevil]

Thanks. Fan grils will be the same, we won't change it
If you want to install 3 x 480mm radiators inside it needs to be that tall, because radiators are under PSU.

Kind Regards

[Church]

BTW, may i ask as to why you won't change it? I recall that asked many times in your cases threads. If there is demand, why not make what customers prefer? At such price point one would like to have case without drawbacks including looks area, however great case might be in other areas, yet i wonder where is gain to NOT make what customers want when you had made few changes on customer feedback related with other things (eg. cable management cuts)?
I can understand that making separate/interchangeable radgrills might rise price. I can also understand that you don't want to make multiple versions with different grill designs for same reason. But in that case, why the only design should be current bricky one? I might be wrong, but imho something like stripes design might look much better and make case more popular. At very least i suggest to create poll and ask what design of grills users would like most (bricky/hex/stripes/mesh).