The Obsidian 800D thread :D

[Hugo381]

@Hugo381 great routing!

Thanks. I wanted to make sure the RAM didnt get covered up by the tubing since I have Ballistix Tracers. I am glad I got the EK MultiOption RES since it gives me the option to feed through the top and still have fill ports available on top.



Sorry, double posted

[Batiatus]

I just got a 800 D I'm loving it so far, got a killer deal on it. More Pictures of water setups Please.

Also i got it cheap due to the front door not closing all the way, where can I get a new door for cheap?

You should be able to get a replacement for free... just send an e-mail to Corsair.

[Elder]

Last rev... darkness and blood

[andyonion]

sweet! those lund reservoirs are awesome.

[Nightprowler_77]

Very nice Elder!

[zalbard]

@ Elder:
Outstanding!
Who is the manufacturer of your VGA block? Is that Koolance?

[Nightprowler_77]

@ Elder:
Outstanding!
Who is the manufacturer of your VGA block? Is that Koolance?

I think its Aquacomputer.

[Elder]

sweet! those lund reservoirs are awesome.

Right, especially when it is illuminated LED connected in aquaero multicolor.
I can control the brightness of the backlight in any way or completely disable them at any time.

Very nice Elder!

Thanks bro

@ Elder:
Outstanding!
Who is the manufacturer of your VGA block? Is that Koolance?

Aquacomputer aquagraFX 480GTX (GF100) G1/4" nickel plated

I think its Aquacomputer.

I changed only the original cover.
The black version is laser cut from aluminum.
I used the side panel from Lian Li brushed aluminum.

More pics here:
http://forum.pclab.pl/topic/581684-O.../page__st__160

Today, laser cut out this little thing.
Will use only two pieces of stickers, a second GTX480 is ready for assembly.

[boyboy22]

hi, all this is my~
havnt 100% done yet.......

[Gareth]

mine now completed:









I will be adding another 580 GTX and a 2nd SSD drive later on in the year.

[MasterSe7en]

elder can you please tell me where you got that resevoir?

[LuKe88]

awesome work Gareth !!
Is that feser one or primochill ?

[Church]

Gareth: i'd move D5 pump farther in the back, so that it's outlet would be position just below lowest GPU full cover and would remove those two 90deg sharp bends. (If pump engine is too long and will hit back of case, then also turn it partially in vertical axis, though maybe no need for that, as probably GPU's inlet-outlet can be switched inbetween gaining few more distance).

[Chamezz]

elder can you please tell me where you got that resevoir?

Looks to be a LUND-reservoir if I'm not mistaken.

[Quad-Damage]

Sorry for the Camera Phone pics, I was able to mount the SSD in my case. I like the case so far, it's really big, water is going back in ETA 1 day. Is there a way to make the fans a bit more silent? They are louder then my S Flex E's on my rad.

[beast200]

Hi

have just purchase a 700d from ebay
has any fitted a thermocill rad PA120.3 3 fan with the 25mm spacing and not the new/standard 15mm
fitting the PA120.2 2 fan in bottom chamber. is it better vertical or hozintonal


Cheers

mark

[Gareth]

awesome work Gareth !!
Is that feser one or primochill ?

It's feser one.

[Gareth]

Gareth: i'd move D5 pump farther in the back, so that it's outlet would be position just below lowest GPU full cover and would remove those two 90deg sharp bends. (If pump engine is too long and will hit back of case, then also turn it partially in vertical axis, though maybe no need for that, as probably GPU's inlet-outlet can be switched inbetween gaining few more distance).

I know it's not ideal, it is restrictive, I'll try and redo it when my second 580 goes in.

[Quad-Damage]

I got my DD Delrin Bay Res as well

I was stupid enough to order the wrong size fittings 1/4 when I needed 1/2 I had to go to the hardware store and get copper brabs, but you can't see them anyways.
The install was super easy, I would of put a picture about taking apart a stock Res to fit into the DD, I should of took more pics. Anyways here are some shots of the 24 hour leak test none btw





Also real quick is my turn to tight on the cpu? The line?

[Elder]

elder can you please tell me where you got that resevoir?

Chamezz is right,this is LUND Pom Plex Reservoir

http://www.aquatuning.se/product_inf...Reservoir.html

[morencyam]

Chamezz is right,this is LUND Pom Plex Reservoir

http://www.aquatuning.se/product_inf...Reservoir.html

I found a retailer in the UK that ships world wide. I'm going to be ordering a pomplex as well. Its going to look amazing with my black and uv green color scheme

Sent from my Nexus One using Tapatalk

[morencyam]

Elder, did you get my pm?

Sent from my Nexus One using Tapatalk

[Elder]

Elder, did you get my pm?

Sent from my Nexus One using Tapatalk

Yes, I have already sent the info.

Here are some pics of the preparations for the assembly RX480.
I'll give it to the back of the 800D and the top mount the RX360.

This set should be sufficient for the planned SLI GTX480 and i7 920 @ 4.2 GHz.

[KetelOne]

Elder, I really like the mesh!!! When you had the Feser blue UV what UV Lights did you have and where did you have them located? Did you have any other lights in the case?

Great great cases everyone, I've got a ton of great idea now!

I posted this over in the Liquid Cooling forums, but I wanted to share them here as well
Sorry for the lower quality pictures, I had to take them with my phone until I get my media card reader reinstalled.

This is my first Liquid Cooling setup, I'd have to say I have been bitten by the "bug." I'm already planning upgrades and such







Me playing around with a black light to see how the liquid would look with some UV lights:

[skeyo]

@Elder
Nice build man. I like everything black. Paint those dom. GT heatsinks in black?