The Obsidian 800D thread :D

[cstkl1]

Bolas
its a feser 360. afaik the thickest 360 rad next to xspc rx360 by 0.5mm i think

Elder
are u using a bitspower rad grill at the top..

hmm u know i had this casing in front of me for a day and i got sick of the quality of the top .
the grill is like crap for the 360 rad and wtf is that two bulging thing after the rad gril area at the top for??

but i love the amount of space at the back of the casing to run 3/8th's 5/8th tubings. afaik only case after thermaltake level10 gt that has
this amount of space. the tj07 has a lot of issue on this part.

[Elder]

I used a Bitspower grill 4x120mm.
This became a necessity after the change RX360 to the RX480.

However, I have the impression that Bitspower slightly reduces the flow of air through the too small holes in the mesh.
Of course, only at high speed fans.

[Erklat]

took som better pics than the old ones sorry for the dust :P

*noob*

What are those fittings which link the psu and mobo compartment? I keep staring at it and can't seem to figure that out. What do I need to accomplish that?

[Elder]

You can use Bitspower Case Top Water Fill/ Through Hole Fitting Set

http://www.performance-pcs.com/catal...ducts_id=28425

[Hugo381]

Ok, I promise I will stop posting pics of my PC. This is the final set until I go SLI a while down the road when I need to. For the mean time, I am done with the mods and what not.

Whats new? BluRay Disk Burner, 4 AeroCool Shark Red Devil Fans, LED's on GTX 580 Block, Cathode Ray Light behind reservoir, and Red Single Braided NZXT power cord extensions for motherboard and video card. You might notice that the rear exhaust fan is set up to blow cold air in, so that is my intake besides the bottom fan mounted to the separator by pump. Since I dont like the AeroCool stickers on the back of fans I took off the Corsair one off the 40mm original fan and pasted it on the AeroCool rear fan.

ALMOST FORGOT, VERY IMPORTANT. NOTICE ON THE LAST PICTURE, I MOUNTED A BOTTLE OPENER TO MY COMPUTER DESK SO I DONT HAVE TO LOOK FOR A BOTTLE OPENER IN THE MIDDLE OF A MATCH WHEN I GO FETCH A BEER!

[zalbard]

Love the tubing curves!
They look great!

[Ogge_swe]

*noob*

What are those fittings which link the psu and mobo compartment? I keep staring at it and can't seem to figure that out. What do I need to accomplish that?

i have answerd your PM

You can use Bitspower Case Top Water Fill/ Through Hole Fitting Set

http://www.performance-pcs.com/catal...ducts_id=28425

thats the exact same that i uses

[Hugo381]

Love the tubing curves!
They look great!

you know what looks good? The curves on your avatar!

[SnW]

you know what looks good? The curves on your avatar!

And I love that little monitor you have
could you give me the spec of it mate? as i am looking for such a monitor ...

[Hugo381]

Do you mean the monitor between the widescreen and the desktop? It's just a 17" Sony lcd monitor, looks small next to the 24" asus monitor.

[Erklat]

you know what looks good? The curves on your avatar!

Spot on mate

[SnW]

Do you mean the monitor between the widescreen and the desktop? It's just a 17" Sony lcd monitor, looks small next to the 24" asus monitor.

Yup
just looks so cute shape wise and indeed next to those BIG screens

[Ogge_swe]

Replaced my GTX295 cards with GTX580

still wating for second and third GTX580 with blocks

that white tube is not suposed to be there :P it´s just temporary untill i get my other cards and blocks

[ragnarok95]

Somehow i feel it's nicer with that white tubing there!

[Gareth]

nice, but you should take those GTs apart and spray them red, it's fairly easy to do.

[recent]

So, found a camera from the closet.. Took few pictures of my machine

[LazyMan]

Hey guys first time posting my work here. I was surfing the forum and ran into this thread and thought I would post my latest client build "Skull Crusher". If you would like to see more of this rig or others that I have done please check out my YouTube channel.

http://www.youtube.com/user/WestCoastMods

It's a Mod'n World

[LazyMan]

Replaced my GTX295 cards with GTX580

still wating for second and third GTX580 with blocks

that white tube is not suposed to be there :P it´s just temporary untill i get my other cards and blocks

Very nice.....

[LazyMan]

KetelOne I used a Sunbeam UV cathode (2 each) on top of the 800D.
Thats all,no any other lights.
















Black and Black rev was not so long ago, with G.SKILL 2000MHz TRIDENT.











Thanks, I'm trying, trying ...
It's probably 4 rev in this case starting from April 2010.

http://forum.pclab.pl/topic/581684-O...-DARK-Project/

Very nice, love how clean it looks and the mesh work.

[Thermaltake_Fan]

@LazyMan

Perfect cable management

[ying]

My new watercooling setup:













The biggest change that i made is the conection of the 240 rad of the bottom, so i did a little mod:

[Ogge_swe]

nice, but you should take those GTs apart and spray them red, it's fairly easy to do.

i will when i have the time

[oXcoRe]

Hi 800D Freaks , i´m new on this page and i have a 800D , and I will show you some pictures :-) .

















greetz ox

[Olvik]

My new watercooling setup:

Congratulations mate, a very successful lock.

A greeting.

[Elder]

SLI GTX 480 .. quiet and cool at the maximum load in Metro 2033?
Is it possible?
XSPC RX480 plus HW Labs Black Ice SR1 560 and is quiet and cool