You need a sleeved PSU or someone who sleeves your PSU ?
Send me a PM
Looks like...Heat up a pair of needle nose pliers and squeeze. I agree, nice touch.Originally Posted by kgtiger
Cyberspyder, that one hell of a knife mate.
Can you tell me how you melted the heat shrink in to a Y, looks very sweet!
I love paracord, best alternative on sleeving when not using it in a computer. very good job, be proud of your work, its very good.While not computer related....
Brendan
Nice work fhantastic, in your photo above, the blue looks more like an electric blue that the Grand blue.
Is there a new colour blue or is it just the light, also is that the gray sleeving, looks sweet.
ok, now my turn
Last edited by samurai; 12-25-2009 at 12:07 PM.
I had some sleeved extensions laying around so I put them to use.
The atx24 is half a meter long, haha!
Fractal Design Array mITX
LC Worklog: Project Purple Haze
LianLi V1000
LC Worklog: Project Crystal Clear
LianLi A05
LC Worklog: Project Simplicity
samurai, that black stuff at the end that goes into the plug is heatSHRINKYou should shrink it...
(And get some denser sleeves from Nils)
While it does look like the heatshrink is a bit loose, very nice job on the sleeving, samurai
yes,it does look like the heatshrink is a bit loose because i warmed up only half of that tape
Last edited by samurai; 12-26-2009 at 08:14 AM.
Hehe - economic approach to heatshrink usage
just lol'ed so hard..
Tried out the MDPC custom "SLI-bridge diameter" sleeving.
And yes, boredom striked again.
Nils just got your email this morning! Was my first order from MDPC-X. First of all i want to thank you very much for including the heatshrink, it is greatly appreciated. I was going to use some i had left over from my first sleeving attempt but as i have seen your stuff really is "out-of-this-world" and 100 times better for the job than the stuff i used. On my last sleeving project i used the deluxe high density sleeve from ppcs, While that stuff does a fine job it still is no comparison to MDPC-X sleeve. Everything Pictured using MDPC-X sleeve is amazing. I cannot wait to receive my sleeving!!!
I will be using MDPC-X sleeving exclusively from now on. It's also a breath of fresh air to see someone doing business who is not out to kill the consumer, Keep up the excellent work. Nothing but the best!
...Will post pics when it arrives...
ohhh and p.s.: going to be starting a build log soon involving this sleeving project with a corsair 800d watercooled
Last edited by TBahre; 12-27-2009 at 06:20 AM.
Could any one be kind to give me some links for a PCI 6 Pin adapter. Looking for the PCU adapter that is
..--..
S S S
R R R
Thank you
[Asus P8Z77 WS Z77] [i7 3770K] [Apogee HD waterblock]
[16GB G.Skill DDR3 PC3-19200 2400MHz TridentX Series CL10 (10-12-12-31) Dual Channel kit]
[Zotac GTX 680][Watercool Heatkiller GPU-X3 GTX680 Hole]
[2x ThermoChill PA120.3][2x Laing DDC-1T-PLUS - XSPC Dual 5.25"Bay Reservoir ][Stacker 832][PSU:ThermalTake 1200W][2x 24" Screens BenQ G2420]
Current Rig ASUS P8Z77 WS - ATX / Z77 Intel Core i7-3770K CM Stacker + 2nd WC Casehttp://img49.imageshack.us/my.php?image=pict0157dh0.jpg
Project Blue Orbit - Phase 2
http://www.xtremesystems.org/forums/...d.php?t=243865
Build With MIPS freezers NB,SB,Mosfets
if i connect 2 fans parallel how can i sleeve the cables?
chilledpc.co.uk
6 pin 6/8 pin as well as 8 pin atx and 24 pin...
Hi sorry for the doubple post, but I seem to be breaking off my molex's once in a while...any way to fit them back?
Yesterday I had time to sleeve:
Awesome, nice job xien
I've been reading this and I'm wondering how you guys "stretch" the sleeving so it stays stretched? I've stretched it on the wire but majority of the times it just goes back to the normal size. Are you stretching it prior to putting it on the wires?
that looks awesome Xien. I really like what you did with the mesh on the video card as well.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
You need a sleeved PSU or someone who sleeves your PSU ?
Send me a PM
I'm thinking about doing a yellow/green setup after seeing the sleeves next to each other like that!
Hi guys. I've sleeved most of my cables in black, i'm just wondering if the blue mdpc-x selling is uv?
if not then does anyone knows where i can get good sleeves which is uv blue or green?
- Intel Core I7 920 Golden Chip @4.6Ghz 24/7 stable
- Asus P6T Deluxe Motherboard
- OCZ 6GB DDR3 Reaper Ram
- Asus HD4870x2GB Graphic card
- 2 x 500GB Western Digital RE3 HDD on Raid 0 (C
- 1TB Seagate Barracude HDD (D
- Kingwin March 100W PSU
- Creative Sound Blaster X-Fi Titanium Sound Card
- Case Lian Li PC-75.
Last edited by shazbom; 01-03-2010 at 02:13 PM.
mdpc-x sleeve is UV-active
Hi mate.. Thanks so much for replying my silly question. i just saw this on their website. (Is this MDPC-Sleeve UV-active?mdpc-x sleeve is UV-active
Yes it is! )
Anyways, dont know which colors to go with. i am using feser uv acid green water. what do you think. what colors will look good?
+ i always build systems for my mates, i wanna buy family pack from their website but i can only see black and which in builk.. do you know how i can get family pack for the rest of the colors too?
Posting Permissions
Reply With Quote
Bookmarks