Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
All he's saying is that price wise, it's equivalent to a 47xx type card, but performance wise, expect it to be a 4870-4890 performer
Looks like the leaks are coming in!
I'd say the way HD4770 OCs is a good way pointer for other 40nm chips too. They say TSMC 40nm is Black Diamond 2, and 130nm version of it was nice...
You were not supposed to see this.
i'm seriously looking forward for these cards ! my 8800 gts 512 needs to get some rest![]()
Q6600 (VID : 1.325v) || P5Q PRO || 3GB Corsair || 8800 GTS 512 || 1.5 TB HDD || Thermaltake 550W || Antec 900 || Logitech G15 || Logitech G3 || Pioneer HDJ-1000 Headphones || Razer mousepad
WaterCooling System:
MCP 655 || XSPC 360 Rad || HeatKiller 3.0 Cu || 3 x NoiseBlock BlackSilentFan XL2 rev 3.0 || and some tubes/fittings etc
Sounds about right. Thats a few days before Windows 7 goes retail. According to what AMD/ATI had in mind. As for the rest of the lineup:Originally Posted by blindbox
The Earlier the merrier.....![]()
| Intel Core i5 2500K | Asrock P67 Extreme 6 | Gskill Ripjaws 8GB CL7 |
| Sapphire HD6970 | Creative X-Fi modded | Corsair HX850 | Corsair H60 |
I wonder if AMD finally fixed their power guzzling, freq-transition-flickering GDDR5 controller. The scary thing is, RV770 had the issue from get-go, and they didn't fix it in RV740, nor in RV790. That's 3 chips in a row with an issue that alone blows the idle power consumption sky high...
You were not supposed to see this.
4890 idle power consumption is lower then GTX260 and lower then 4870 idle and load , they refined the design before putting it on the 40nm .
^GTX260 216 idles at ~40W lower than HD4890. All because GDDR5 is not downclocked, resulting in crazy idle current draw for the MEMI/O.
![]()
Last edited by largon; 08-21-2009 at 10:32 AM.
You were not supposed to see this.
^Huh?
Not gonna happen.
You were not supposed to see this.
Xbit labs show a different story they measure at the card and its somewhat consistent with other reviews i saw .But am not sure who to believe .
I just changed my idle clocks on the hd4870x2 to 300 core and ram and turned catalyst ai to off to run in single core mode. All good.
MSI P67 GD65 B3
2500k 4.8
GTX480 835/1650/2000
8gb ram
Win7
is that dynamic ? i mean, do you have to enable the "crossfire" again manually + the clocks each time you want to play or not ? if not, sounds like a good deal !![]()
Q6600 (VID : 1.325v) || P5Q PRO || 3GB Corsair || 8800 GTS 512 || 1.5 TB HDD || Thermaltake 550W || Antec 900 || Logitech G15 || Logitech G3 || Pioneer HDJ-1000 Headphones || Razer mousepad
WaterCooling System:
MCP 655 || XSPC 360 Rad || HeatKiller 3.0 Cu || 3 x NoiseBlock BlackSilentFan XL2 rev 3.0 || and some tubes/fittings etc
its getting close to launch and no specs yet, i think this might be a paper launch, lets hope not, cross your fingers.
http://www.brightsideofnews.com/news...t-carrier.aspxPlease note that the benchmark results will be known around two weeks after the product launch, in order to give enough time for paper magazines and partners to fill in the stocks world-wide. Just like the Radeon 4800 series, Evergreen hardware will be available world-wide at the same time [this time around, late September - around 24th].
You could easily see that when downclocking the RAM manually in idle. Yes, the GDDR5 eats a lot of energy while doing barely anything...
So, I sure as hell hope as well that AMD fixes this
You could do that "kind of" automatically with Rivatuner, at elast there you can set different clocks for 2D and 3DDunno about CF though.
Here's a thread about that (in german), I'm quite sure there's something like that in english forums
http://www.hardwareluxx.de/community...d.php?t=528358
Last edited by FischOderAal; 08-22-2009 at 01:28 AM.
Notice any grammar or spelling mistakes? Feel free to correct me! Thanks
Bookmarks