Page 61 of 95 FirstFirst ... 11515859606162636471 ... LastLast
Results 1,501 to 1,525 of 2366

Thread: Micron D9 GMH\GKX\JKH etc club

  1. 03-05-2009, 12:11 AM #1501
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    On a DFI P35. Still, nice result.
    tnx man
    your tg pc6400 has gkx or gmh chip?
    Reply With Quote Reply With Quote
  2. 03-05-2009, 12:56 AM #1502
    CryptiK
    CryptiK is offline
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Quote Originally Posted by Ch@pS View Post
    http://img165.imageshack.us/img165/1875/10433.jpg

    Managed this with my Team Xtreem D9GMH, any suggestions to get them over 11k read? Its what I'm aiming for.
    On P45 (not a DFI) you will need around 540 FSB to break 11K read without using a high CPU clock to 'cheat'.

    You can see in the SS below I am close to 11K at 533 FSB, but to get the FSB any higher I had to back off some chipset settings so I lost some efficiency, which means I had to go up to 540 FSB (shown on second SS) to break 11K.



    Here is a run that is the lowest settings I can use to break 11K read. I use a low CPU clock of 3.78GHz so it just shows the raw power of the FSB and ram speed.

    Last edited by CryptiK; 03-05-2009 at 12:58 AM.
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
    Reply With Quote Reply With Quote
  3. 03-05-2009, 02:36 AM #1503
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    i'll try your same settings cryptic, just to verify if it's true that m2f sux at speed against ud3r p45. i've heard about it but i never verified
    Reply With Quote Reply With Quote
  4. 03-05-2009, 06:15 AM #1504
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    the new ep45 extreme is here
    Reply With Quote Reply With Quote
  5. 03-05-2009, 10:41 AM #1505
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    go for extreme oc man, i'm waiting screens...will it be pwnage?
    Reply With Quote Reply With Quote
  6. 03-05-2009, 11:42 AM #1506
    okorop
    okorop is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    185
    Quote Originally Posted by Mafio View Post
    the new ep45 extreme is here
    I am waiting for your screen
    Reply With Quote Reply With Quote
  7. 03-05-2009, 01:32 PM #1507
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    this afternoon i tried the crucial ballistix of my friend Guglio on my new ep45 extreme.

    this ram is spectacular...

    1400mhz cas5 2.4volt



    1200 cas4 2.4volt



    1225 cas4 2.45 volt

    Reply With Quote Reply With Quote
  8. 03-05-2009, 01:34 PM #1508
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    well done
    but...no more than 1400 cas5? do you try 2.5+v?
    goodbye my dear ut p35, i'll love you forever
    Reply With Quote Reply With Quote
  9. 03-05-2009, 02:22 PM #1509
    okorop
    okorop is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    185
    @Mafio good start.....now overclock the ram
    Reply With Quote Reply With Quote
  10. 03-05-2009, 03:32 PM #1510
    Shiranui Gen-An
    Shiranui Gen-An is offline
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,532
    This is my new Patriot kit on 2.06V real:
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: DSC00125.JPG  Views: 221  Size: 181.6 KB  ID: 95914  
    Reply With Quote Reply With Quote
  11. 03-05-2009, 03:37 PM #1511
    Bigred1
    Bigred1 is offline
    Registered User
    Join Date
    Sep 2008
    Posts
    65
    Pulled these from and old HP Media Center PC. Loving them allready. I know they will go higher but I cant seem to get my DFI BloodIron P35 board to do it.It craps out past 1150 dual channel. I must not being doing something right.

    DDR2 1100 Cas5 @ 2.0v
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: RAM LBL.jpg  Views: 216  Size: 26.0 KB  ID: 95915   Click image for larger version.  Name: IC's.jpg  Views: 216  Size: 28.7 KB  ID: 95916   Click image for larger version.  Name: RAM SPEED.JPG  Views: 218  Size: 188.5 KB  ID: 95917  
    I5 750@4.0
    H50-Push-Pull
    Asus P7P55D Pro
    OCZ Plats, 1600@7.7.7.20
    ATI Saphire 5850@1000/1200
    2xWD5000AAKS in RAID 0
    PC P&C 610watt
    Antec P180
    Reply With Quote Reply With Quote
  12. 03-05-2009, 03:57 PM #1512
    Shiranui Gen-An
    Shiranui Gen-An is offline
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,532
    JEDEC PCB probably holding you back.
    Reply With Quote Reply With Quote
  13. 03-05-2009, 04:03 PM #1513
    cdawall
    cdawall is offline
    Xtreme Addict
    Join Date
    Aug 2006
    Posts
    1,557
    Send a message via AIM to cdawall
    Quote Originally Posted by Shiranui Gen-An View Post
    JEDEC PCB probably holding you back.
    doubtful they are pretty good as far as PCB's go same PCB my D9DCD's use and those do 1120 CL4


    Reply With Quote Reply With Quote
  14. 03-05-2009, 04:17 PM #1514
    Bigred1
    Bigred1 is offline
    Registered User
    Join Date
    Sep 2008
    Posts
    65
    Quote Originally Posted by Shiranui Gen-An View Post
    JEDEC PCB probably holding you back.
    I dont think its that because I have a pair of OCZ Reaper 1150s that will do 1150 single channel but not dual channel. I think its the auto timings the board giving it but im not sure what sub timings to change to give stability. Or I'm just bad with ram lol.
    I5 750@4.0
    H50-Push-Pull
    Asus P7P55D Pro
    OCZ Plats, 1600@7.7.7.20
    ATI Saphire 5850@1000/1200
    2xWD5000AAKS in RAID 0
    PC P&C 610watt
    Antec P180
    Reply With Quote Reply With Quote
  15. 03-05-2009, 04:33 PM #1515
    tool_462
    tool_462 is offline
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,653
    I've run some D9's up to 1350 CAS 5 in dual channel on Blood Iron, for what its worth.
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
    Reply With Quote Reply With Quote
  16. 03-05-2009, 07:23 PM #1516
    Bigred1
    Bigred1 is offline
    Registered User
    Join Date
    Sep 2008
    Posts
    65
    Quote Originally Posted by tool_462 View Post
    I've run some D9's up to 1350 CAS 5 in dual channel on Blood Iron, for what its worth.
    If you could help me achieve that it would be greatly appreciated.
    I5 750@4.0
    H50-Push-Pull
    Asus P7P55D Pro
    OCZ Plats, 1600@7.7.7.20
    ATI Saphire 5850@1000/1200
    2xWD5000AAKS in RAID 0
    PC P&C 610watt
    Antec P180
    Reply With Quote Reply With Quote
  17. 03-05-2009, 09:01 PM #1517
    whe3ls
    whe3ls is offline
    Xtreme Member
    Join Date
    Jul 2007
    Posts
    396
    Quote Originally Posted by tool_462 View Post
    I've run some D9's up to 1350 CAS 5 in dual channel on Blood Iron, for what its worth.
    i have been 1200 or so
    My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's
    Case: Modified RocketFish
    Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
    Reply With Quote Reply With Quote
  18. 03-06-2009, 12:29 AM #1518
    PizzaMan
    PizzaMan is offline
    Registered User
    Join Date
    Dec 2008
    Posts
    93
    Ballistix Tracers, double sided. 2.35v 1300Mhz. I believe this pair is GKX, but I'm not sure. The don't like T1 and cas 3, but they scream with cas 4 and 5. ICs just say 'Ballistix' and '-f17' Not totaly stable at 1300. Can run SuperPi and other benchies but crap in RL gaming.

    http://valid.canardpc.com/show_oc.php?id=519358
    Reply With Quote Reply With Quote
  19. 03-06-2009, 04:20 AM #1519
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    Pulled these from and old HP Media Center PC.
    rotfl! hp building ht pc with high end ram...incredible
    goodbye my dear ut p35, i'll love you forever
    Reply With Quote Reply With Quote
  20. 03-06-2009, 07:07 AM #1520
    Bigred1
    Bigred1 is offline
    Registered User
    Join Date
    Sep 2008
    Posts
    65
    Quote Originally Posted by simone18 View Post
    rotfl! hp building ht pc with high end ram...incredible
    I couldn't believe it either. I have been looking everywhere for some sticks of D9 and i found them in the one place you wouldnt think to look, An HP
    I5 750@4.0
    H50-Push-Pull
    Asus P7P55D Pro
    OCZ Plats, 1600@7.7.7.20
    ATI Saphire 5850@1000/1200
    2xWD5000AAKS in RAID 0
    PC P&C 610watt
    Antec P180
    Reply With Quote Reply With Quote
  21. 03-06-2009, 08:28 AM #1521
    zsamz_
    zsamz_ is offline
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,247
    Quote Originally Posted by Bigred1 View Post
    I couldn't believe it either. I have been looking everywhere for some sticks of D9 and i found them in the one place you wouldnt think to look, An HP
    you would be surprised but i seen many d9 in hp pcs

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v
    Reply With Quote Reply With Quote
  22. 03-06-2009, 09:15 AM #1522
    okorop
    okorop is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    185
    Quote Originally Posted by simone18 View Post
    rotfl! hp building ht pc with high end ram...incredible
    OMG
    Reply With Quote Reply With Quote
  23. 03-06-2009, 09:26 AM #1523
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    cellshock pc8000 + crucial ballistix pc8500 on my ep45 extreme

    1200mhz cas4 @2.4volt



    guys, this mobo kick ass
    Reply With Quote Reply With Quote
  24. 03-06-2009, 09:29 AM #1524
    okorop
    okorop is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    185
    Quote Originally Posted by Mafio View Post
    cellshock pc8000 + crucial ballistix pc8500 on my ep45 extreme

    1200mhz cas4 @2.4volt



    guys, this mobo kick ass
    congratulations....really a good result with 4 dimm ram
    Reply With Quote Reply With Quote
  25. 03-06-2009, 09:53 AM #1525
    radaja
    radaja is offline
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,764
    great job mafio.
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0
    Reply With Quote Reply With Quote
Page 61 of 95 FirstFirst ... 11515859606162636471 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules