Koolance - 350 Disassembled and close up.

[NaeKuh]

I didnt want to amend to another person's thead so i decided to make my own.

Anyhow First off i would like to thank dean for these wonderful samples. I will throw them on my rack this weekend and do some tests with it.

But the high res pictures...

When you open the nice box this is what it comes with:


The number 1 question that is to be asked is will BP compressions fit? I think most likely:



Theres a lot of room as you can see with koolance compressions: (ewww sorry about the dirty compression, didnt clean up after)


How big is the block? Here is some comparisions:





So how does this thing look under? As you open the block its in 3 pieces:


Closeup of the fine detail koolance spent on the micropins:


Is it overall sexy?




Performance numbers will come this weekend. Im getting prep'd



Thank you for reading.

[Linchpin]

Thanks for pics, looking forward to the testing.

[gillbot]

very nice

[aspire.comptech]

Looks alright in Delrinz.

Though I really don't like the look of the mounting bracket.

Also are the bolts holding your supreme together rusted?

O.o

[NaeKuh]

Also are the bolts holding your supreme together rusted?

O.o

Rust??? where?
oh the black bolts??

ROFL yeah... thats my first supreme... its been though a lot and back. :P

At one time i had 3 supremes, the second one i destoryed, the last one is on sakura.



:P

[aspire.comptech]

Rust??? where?
oh the black bolts??

ROFL yeah... thats my first supreme... its been though a lot and back. :P

Ahahaha, that must have been quite the experience.

[DarthBeavis]

Is the PT6 mobo standard ATX? mine is at DD so I cannot check it out

nice pix btw

[NaeKuh]

NaeKuh whats under the black tape ? i7

Good presentation of the block, the material is solid or plated

uhhh...

code to a unlocked Neha-EP @ 3.2 :X

I think you know where im getting at... If i say anymore ima get spanked... so please dont ask.. :X


Dean said it was solid copper core, with nickle plating.

Is the PT6 mobo standard ATX? mine is at DD so I cannot check it out

nice pix btw

standard ATX, which is one reason why i got it. It needs to fit in a torture rack after i get my gainestown up.

[Boogerlad]

hey naekuh, can you give me the length of those square pins in the middle via calipers?

[twwen2]

Nice work Naekuh!

Good to see some inside pics and mounting. Looking forward to the numbers.

[Hondacity]

nice pics...i guess i'm the only with the acryllic top

[jollyjoker]

Thanks for the pics. Looking forward to the testing.

[NaeKuh]

hey naekuh, can you give me the length of those square pins in the middle via calipers?

my digital ones i ordered from habor hasnt come in yet. :\

I was looking for my sidewinder T ruler, but i cant seem to find that either.

When i find something yeah i intend to messure the diameter, and that pin matrix. :P

Unless dean asks me not too.

But that would come with my numbers i get this weekend.

[Boogerlad]

thanks man!

[XS_RoB]

Looking great! - I'm excited to see if it competes on par with EK! I like the internals, with all the water being channeled to the outside.

Thanks for Testing NaeKuh!

[Moose1974]

Any results from testing yet?

[NaeKuh]

Yea sorry guys i was taking apart Sakura.

I have a WIP on the Build, In the WIP Log under Eva - Chan.

http://www.xtremesystems.org/forums/...d.php?t=210791

Once she gets built, which i should start assembling tomorrow, i'll give ya some core temps.

[Chruschef]

i'm surprised with the quality, but the mounting plate is very unattractive. The GTZ & Fusion V2 are much more attractive.

[NaeKuh]

Coolant observed at 26-27C...

the block isnt that bad once you get a good mount...

Had a hard time getting a good mount done tho...

i need to go back tweeking my chip... sorry for the censorship, its still under NDA... as you can see its a gainestown.

Will do a longer load temp with just real temp and OCCT after i get my 4ghz.. @#@!#@!#!@ stupid 160 wall...

[MomijiTMO]

Could you give us an idea of where this block stands amongst the competitors? Would you dare say it is in the same category as the GTZ etc?

Do you wanna whack it on a 775 cpu so you can compare it?

[philbrown23]

now thats a sexy block! why did you bleep out all cpu info? is that chip not released yet? I dont know im not really following i7 atm as I cant upgrade for a while

[NaeKuh]

Could you give us an idea of where this block stands amongst the competitors? Would you dare say it is in the same category as the GTZ etc?

Do you wanna whack it on a 775 cpu so you can compare it?

yeah i intend on dropping my EK Supreme on soon... probably next week...

But momi u gota love those even temps..

My whole computer is still a mess wire wise.. but i promised you guys numbers...



My setup was using a Dual inlet Fed DDC-2 x 2 straight to in on the koolance 350

Then to PA and back to res:

now thats a sexy block! why did you bleep out all cpu info? is that chip not released yet? I dont know im not really following i7 atm as I cant upgrade for a while

Says gainestown... not bloomfield..

[Baleful]

I like the orange zipties..... has a Techno feel to it...

[MomijiTMO]

Well those temps are high but people were getting 80s with their loops which makes me bricks.

[NaeKuh]

Well those temps are high but people were getting 80s with their loops which makes me bricks.

no these suckers RUN HOT... i kid not...

Anyhow Final 10 min temps...

wasnt gonna go anywhere else..

Ambients recorded at 25.6
Coolant Temp recorded @ 26.5 - 26.7



I think my chip also runs very HOT...

im really loving the flat out temps...
Im getting closer to 4 also. :P

I like the orange zipties..... has a Techno feel to it...

Trademark PissedVille Secret...