Block for RAMPAGE EXTREME Design Ready

[BP-Vincent]

Hi All,

We almost ready the new version on all roary series in this week but we also ready the design on ASUS RAMPAGE EXTREME ...

Here they are....



One more thing is please make sure you get the RMA number form us..and then we can arrange the new version for you from next week.

[Pellepel]

Damn four blocks for that mobo, looks good vincent.

[Big_Daddy]

Damn four blocks for that mobo, looks good vincent.

maybe I need to take off my shoes too, but how do you count 4 blocks? 2 for the mosfet's, and one combo for the nb/sb

[zlojack]

maybe I need to take off my shoes too, but how do you count 4 blocks? 2 for the mosfet's, and one combo for the nb/sb

Look above the RAM slots.

[Waterlogged]

maybe I need to take off my shoes too, but how do you count 4 blocks? 2 for the mosfet's, and one combo for the nb/sb

There's another block hiding by the RAM slots.

[Big_Daddy]

ahh.. my bad.. what the heck is that? Vincent needs to put some shiny compression fittings on them to make them stand out..

[veedubfreak]

So will this also fit the rampage formula? The only difference between the 2 boards is ddr2/ddr3 correct?

[Zeus]

So will this also fit the rampage formula? The only difference between the 2 boards is ddr2/ddr3 correct?

No.

[screwtech02]

From all outward appearances, i would assume that these blocks will fit/work on a Maximus II Formula???

[eternal_fantasy]

From all outward appearances, i would assume that these blocks will fit/work on a Maximus II Formula???

I'm sure the 2 MOSFET blocks will.

[eternal_fantasy]

Oh and from my experience the memory's MOSFETs don't even get mildly warm under load... the water in the loop may actually heat the FETs up

LOVE the NB/NBVRM/SB block though

[Sadasius]

Very nice......Like how all the MOSFETs are covered for the NB,CPU and RAM. Now....Vincent......You keep showing us all this computer pron and to be Frank (if he does not mind), ummmm you got stock the shelves before our stuff is already replaced with newer stuff. I have a Maximus Extreme that is almost a year old and in computer years that's about 80 in human years. Keep up the great designs and hopefully we see them on the shelves soon.

[WhiteFireDragon]

From all outward appearances, i would assume that these blocks will fit/work on a Maximus II Formula???

i'll echo this. since they rampage extreme and maximus II have exact same layout, it should fit, but i just need to make sure

for anyone that will have the extra aircooled heatsink assembly (with the huge modular mosfet sink) leftover after getting this kit, i'm willing to buy of you so PM me

[eternal_fantasy]

i'll echo this. since they rampage extreme and maximus II have exact same layoute

No, they DON'T have exactly the same layout. They might have similer looking stock HPA, but they are totally different motherboards design wise.

Let's skip the RAM MOSFETs, as Maximus II Formula don't even have the mounting holes for them.

The NB/SB blocks, if you look carefully, also extends to the left side of Rampage Extreme's northbridge. This is so that it can also cool the NB's power circuitry, as they can get quite hot under load. Its layout is completely different from the Maximus II Formula, and might even cause a short if you try fitting it on the motherboard.

What you're looking for are these.

Only the CPU MOSFET blocks will fit both the Rampage Extreme and the Maximus II Formula from this set.

[BP-Vincent]

Awesome block! Any idea when these will be available in the stores?

Just ordered the new Swiftech block fot my RE.

Oh well, i can always sell it and get this...

We try our best to ship all of those model out before the end of Oct.

WOOOWWWW......that is real deal dude........ejejejejejej congratulation can you post more photos????

Thanks...We will arrange more photos after I check all the design in this week..

Hope to get em in germany...I NEED EM

Sure...Europe will have resellers to stcok them when it available.

Looks good

+1 on when we can expect to see these in stores?

We try our best to ship all of those model our before the end of Oct.

Vincent...

Still waiting on 780i blocks...

Don't worry about this...You got my words.

+1, please bring BP blocks to the Uk, all we can buy is a very small selection of Compression fittings.

Business issue...But we think we can solve this.

Me to will these be in the uk?

Business issue...But we think we can solve this.

Damn four blocks for that mobo, looks good vincent.

thanks...Here is last one block will be come with the Black Freezer AIX48NSE main blocks.

Very sexy, too bad you didn't do the same for the Maximus/Rampage Formula but that's market for ya !

If here can have this model we can got...will get one to check.

ahh.. my bad.. what the heck is that? Vincent needs to put some shiny compression fittings on them to make them stand out..

Sure..And the Black Sparkle series will be more attractive, right.

So will this also fit the rampage formula? The only difference between the 2 boards is ddr2/ddr3 correct?

For Black Freezer MOS AMOSI can fit...but for AIX48NSE need to get that and check it.

YEAH PLZ PLZ Rampage Formula Blocks PLZ !

For Black Freezer MOS AMOSI can fit...but for AIX48NSE need to get that and check it.

Oh and from my experience the memory's MOSFETs don't even get mildly warm under load... the water in the loop may actually heat the FETs up

LOVE the NB/NBVRM/SB block though

Thanks...

Very nice......Like how all the MOSFETs are covered for the NB,CPU and RAM. Now....Vincent......You keep showing us all this computer pron and to be Frank (if he does not mind), ummmm you got stock the shelves before our stuff is already replaced with newer stuff. I have a Maximus Extreme that is almost a year old and in computer years that's about 80 in human years. Keep up the great designs and hopefully we see them on the shelves soon.

We try our best to ship all of those model out before the end of Oct.

Yea, basically, please get this to the retailers as soon as possible, along with your rotaries...
Can we get any pictures of those blocks with their tops off?

EDIT: Those are all copper, right?

We try our best to ship all the new rotary model in this week..

and for Black Freezer AIX48NSE will be shipped out before the end of Oct.

Sure...All of our Black Freezer now are all Copper.

I also hope to be all copper and i aslo hope to find the NB/SB combo somewhere to buy in Europe? Is the block near the memory really necessary?

All of them are all copper...the Black Freezer AM48 will come with the main blcok.

[welshtom]

We try our best to ship all of those model out


Business issue...But we think we can solve this.

.

Please Explain

Have emailed you/BP four or five times in the last 2 months with no reply

Awaiting to buy stock for the UK

[BP-Vincent]

Please Explain

Have emailed you/BP four or five times in the last 2 months with no reply

Awaiting to buy stock for the UK

We have replied your mail for a long time...

Please give me your mail address again..thanks

[Zeus]

Man, i really hope you guys will hurry up with this block.

I now have the Swiftech block replacing the stock fusion but there's hardly any improvement even though i've put some nylon washers onto the screws that hold the heatpipe assembly.

Does this block come as a set i.e. nb-sb block+mosfet blocks+ that 3rd small block?

Honestly, i don't really want to watercool the mosfets, i just want that NB temp to be tamed.

[BP-Vincent]

Man, i really hope you guys will hurry up with this block.

I now have the Swiftech block replacing the stock fusion but there's hardly any improvement even though i've put some nylon washers onto the screws that hold the heatpipe assembly.

Does this block come as a set i.e. nb-sb block+mosfet blocks+ that 3rd small block?

Honestly, i don't really want to watercool the mosfets, i just want that NB temp to be tamed.

We are on the way to make them...

AIX48NSE will have MOS AM48 (3th small block)included and Packaged in the same box.

[DeathWalking]

I'm so sad this isn't going to make my (initial) build. End of October is just too long to wait, so I guess it's the NB-SMAX for me.

[BP-Vincent]

I'm so sad this isn't going to make my (initial) build. End of October is just too long to wait, so I guess it's the NB-SMAX for me.

Hello...not end of OCt....Next week will be available..

[foolio]

Vincent,

Wich supplier in the Netherlands do u guys have that can sell your blocks?
Reason i ask is that my supplier says he cant get that specific block yet (maybe take 2 months he said)

So i was wondering where i could get it.

[quattro_]

can an MCR120 handle all these blocks? i would like to keep both my CPU and GPU loops separated from the chipset blocks .

[zlojack]

can an MCR120 handle all these blocks? i would like to keep both my CPU and GPU loops separated from the chipset blocks .

Probably can. I'm going to run all of mine off of one MCR120 to keep CPU and GPUs separate as well.

[Xilikon]

can an MCR120 handle all these blocks? i would like to keep both my CPU and GPU loops separated from the chipset blocks .

I'm doing that myself and it works great. The chipsets and mosfets isn't generating tremendous amount of heat and having low temps have no real effect on overclocking.