[PROJECT] Homewrecker V2

[disruptfam]

looks very nice evil! just need that ek acrylic top for the supreme and your set

[LogAn'sRun]

sure, its not complete, meaning im going to change it in the future but i can
show you guys. i can easily explain it, its not to complicated. its really just
connected to the 12v line on the PSU with 100 ohm resistors inline on each
3 array of LEDS.

like this

-12dcv - LED +- LED +- LED + 100ohm +12dcv X 3

Thanks evil, but I was more after seeing the actual connection, and wiring. To be more specific are you just going to connect it to a 4 pin molex and hide it somewhere, or have you come up some other solution?
Since you're connecting so many different arrays together (right?), I was curious to see that junction point. And where are you placing the switches??

[twwen2]

This has gotta be one of my favourite builds ever. I still remember seeing the first teaser shots in the WC gallery and thinking "OMG That is H-O-T!!".

I love the acrylic and LED effect too. Great work man

[[XC] NetburstXE]

This has gotta be one of my favourite builds ever. I still remember seeing the first teaser shots in the WC gallery and thinking "OMG That is H-O-T!!".

I love the acrylic and LED effect too. Great work man

I have to agree with you on this. This is one amazing build!

[septim]

great build, great LED wiring. maybe add another color series? hehehe...

[b@llz0r]

looks great evil... I got 3mm leds for my blocks, but it looks like your using 5's???

[evil-98]

looks very nice evil! just need that ek acrylic top for the supreme and your set

i was thinking about it but i dont have the money for it right now xtremely broke

Thanks evil, but I was more after seeing the actual connection, and wiring. To be more specific are you just going to connect it to a 4 pin molex and hide it somewhere, or have you come up some other solution?
Since you're connecting so many different arrays together (right?), I was curious to see that junction point. And where are you placing the switches??

yes there are multiple arrays. theres 3 series total which then meet at a common connection (aka parallel) meaning they all come to one (+) and one (-) then thats going to be connected to a 2 pin connecthing which is inlined with my power switches which draws power from a 4 pin molex like normal. ill get pics as soon as i get to it

This has gotta be one of my favourite builds ever. I still remember seeing the first teaser shots in the WC gallery and thinking "OMG That is H-O-T!!".

I love the acrylic and LED effect too. Great work man

Thanks! ill get you those dimensions tonight mate

I have to agree with you on this. This is one amazing build!

thanks!

great build, great LED wiring. maybe add another color series? hehehe...

i was going to lol but then i thought about it and i decided not too. maybe in the future

looks great evil... I got 3mm leds for my blocks, but it looks like your using 5's???

i was going to go with 3mm but i already had the 5mm so why not

small update guys, did some modding on the power switch panel
i attached the original power switch button to a small momentary
switch for the stealthed drive, and its obviously painted black

[LogAn'sRun]

nice work on those rockers! Guess you'll be dimming those led's a little

[evil-98]

nice work on those rockers! Guess you'll be dimming those led's a little

lol, not really before they were 12v lamps.. which was a really warm cooler
and made the rocker switch appear green when on, so i opened it up put
in a blue LED and had to add a resistor or poof

thanks

[evil-98]

Good News! Eddy shipped out my block top replacement!
that means i can finally finish this project! yay

[disruptfam]

Good News! Eddy shipped out my block top replacement!
that means i can finally finish this project! yay

[evil-98]

[septim]

thats great news indeed...

[s0lid]

Where u found these fans :o?

[yarden]

hey can someone ban him from xs he is making everyone elses builds look bad :p

man what can i say!! so amazing so so so amazing

[Boyu]

Where u found these fans :o?

Performance PC's?

[Waterlogged]

hey can someone ban him from xs he is making everyone elses builds look bad :p

man what can i say!! so amazing so so so amazing

Nah, he's not making anyone else look bad, he's just showing off that his OCD is worse than most everyone else's.

[evil-98]

Nah, he's not making anyone else look bad, he's just showing off that his OCD is worse than most everyone else's.

OCD?

@s0lid: Boyu is correct, those are ACE fans from PPCS

@yarden: Thanks

no word on the ETA of the top but it took a few weeks to send
over my 775 mount plate for the supreme so i expect the same

no real update, spending most of my time on "Day and Night"
until the block top arrives. but i haven't stopped thinking about
the build for a second

Main Concerns:

1. Fitting the MCR-320 on top w/ fan inside
2. Pump/Res location
3. Tubing

everything else should be ok but those are my main concerns
once that block top comes in

[lyl]

lookin good, evil

[Big_Daddy]

Lookin good Evil, as always.. Damn pm.. Evil, can you drop me an email when you get a chance?

bigdaddy501 at h0tmail d0t com?

Thanks. Got another q about your Sunbeam RE

[psmawson]

Evil where you live

It only take 2working days from EK to UK.

So Even though I just come in from a 9hour night shift I going to stay up all day waiting for the postman. God damn I just hope it yurns up :d

[BlazinTiger]

too lazy to read through the thread, so I don't know if you mentioned it but...you're looking at a top mount MCR220, and bottom part is 320+220 right?

[Matias23]

any updates?

[evil-98]

any updates?

sort of, well i received my SB top a few days ago
and im starting to work on the homewrecker again
been keeping my self busy with day and night. but
ill be starting up again to night, after i clear some
space for the sucker. as of now, im going to drop
everything back into the system to make sure the
system functions properly then to the detailed mods
still worried about pump placement etc, ive decided
im going to do my loops like this;

first off, having issues with mounting the MCR320
up top, i will be mounting a MCR240 on top, with
a second MCR240 below in a series, these rads
will cool both GPUs

i havent decided weather or not to put the mobo
blocks in the same loop as the GPUs or the CPU

and im wondering if the two MCR240s will be have
similar or better results compared to the 360GTX

if anyone has a 240GTX in good condition, im willing
to trade off a MCR320 for it, so if anyone knows
someone please let them know, have there people
call my people and well talk

stay tuned for additional updates

thanks for the interest guys

[Matias23]

What kind of issues u are talking about i have TJ07 as well and have BlackIce 360 mounted on top without any problems. There is not much space between rad plus fans and mobo but there is 3-4mm space.