D-tek nozzles

**Slammin** · 10-13-2007, 04:35 AM

Got my pen and Dtek Fuzion yesterday

Replaced all my tubing too since it's not easy to see the water level, much less see what condition the water is in when using that blue UV tubing.

A whopping 8c-10c drop in temps!

**nealh** · 10-13-2007, 05:12 AM

Originally Posted by Slammin

Got my pen and Dtek Fuzion yesterday

Replaced all my tubing too since it's not easy to see the water level, much less see what condition the water is in when using that blue UV tubing.

A whopping 8c-10c drop in temps!

I assume you used the quad nozzle...nice temp drop but I am sure part of this is a mounting issue

**disruptfam** · 10-13-2007, 05:58 AM

any other result's with the quad nozzle?

**Slammin** · 10-13-2007, 06:40 AM

Originally Posted by nealh

I assume you used the quad nozzle...nice temp drop but I am sure part of this is a mounting issue

No nozzle, yet. I think my Storm may be dirty or clogged though I have not taken it apart to look, but I can see some discoloration in it. Definitely wasn't a mounting issue as I've tried many different AS5 application techniques.

One thing that 'could' have had an effect is that my 120m rad had 3/8" fittings and I used adaptors to mate it up with my 1/2" tubing. As it turns out, the fittings from the Storm fit the MCR120 rad after cutting about 1/4" of thread off, so now my system is completely 1/2" throughout.

I don't know how much impact mixing that 3/8" rad into my loop had overall since I run dual pumps anyway, but I am very pleased with the temp drop and have to attribute that to the Fuzion.

**nikhsub1** · 10-13-2007, 08:12 AM

Umm, yeah from Storm to Fuzion on a quad and 10c is easy.

**nealh** · 10-13-2007, 02:14 PM

Ok..USPS first class from Cal. to FL..2 days!!!!

But Alex taunts me with no pen...WAWAWAWAWA

Gotta love the service

**AAjax** · 10-13-2007, 09:07 PM

Got Mine in today, now when my Iwaki gets here Ill be in business

On another note, has there been a full review posted of the fuzion + nozzle yet?

**dr4gon** · 10-13-2007, 09:23 PM

Originally Posted by mcoffey

yup,

just got mine today from Petra's also. that's the nice thing about US mail, they deliver on Sat.

Can't wait to try them out on my new x6600 G0, settimg up the bench now so I can try my hand at some testing. I'm really intersted in the split nozzle. Should be interesting.

andyc

q6600? I can't wait to see some quad nozzle comparisons too!

**newls1** · 10-14-2007, 05:22 AM

is there only 1 nozzle for us quad core users?? The rest are for single die, dual core CPU's?

**pak** · 10-14-2007, 05:40 AM

Originally Posted by newls1

is there only 1 nozzle for us quad core users?? The rest are for single die, dual core CPU's?

yeah, 1 quad nozzle and 4 single die nozzles. But you could use the single die nozzles on a quad. Verdict still isn't out on what is best for what.

--pak

**rafrag** · 10-14-2007, 11:33 AM

would those (nozzles) fit gt ?

**Servo128** · 10-14-2007, 01:21 PM

Originally Posted by rafrag

would those (nozzles) fit gt ?

Sorry, they won't work on that block, just the fuzion.

**Talonman** · 10-14-2007, 02:25 PM

What is the deal on these? There has not been an update in the thread in 2007...

Are these still good to have on your Fusion CPU blocks?

**sergers** · 10-14-2007, 02:43 PM

Originally Posted by Talonman

There has not been an update in the thread in 2007...

**HotGore** · 10-14-2007, 02:51 PM

Originally Posted by Talonman

What is the deal on these? There has not been an update in the thread in 2007...

Are these still good to have on your Fusion CPU blocks?

Well back in the ancient times of 2007 these where good to have.

**Jedda** · 10-14-2007, 07:08 PM

Originally Posted by sergers

Dude HAS to be looking at Servo's join date.

**punisher69** · 10-14-2007, 11:10 PM

I'm waiting for the data/tests on these before i decide it worth tearing down my loop.

**Talonman** · 10-15-2007, 01:02 AM

Originally Posted by Jedda

Dude HAS to be looking at Servo's join date.

opps... You were right! I looked at his join date of Aug 2006, thinking that was the date the post was made.

My bad!

Does anybody in the US carry them?

**Vrykyl** · 10-15-2007, 04:35 AM

Yup, iv just recieved my new dtek fusion and nozzle kit - im waiting to see results for the 4.5, 3.5 and quad nozzles on a quad core before I dismantle my loop and replace my old storm....
I can only take my loop apart once, so the nozzle needs to be right for best temps the first mount....no swapping nozzles when new evidence comes out for me...!

**Sparky** · 10-15-2007, 05:41 AM

Originally Posted by Talonman

opps... You were right! I looked at his join date of Aug 2006, thinking that was the date the post was made.

My bad!

Does anybody in the US carry them?

Petrastechshop.com

**Jedda** · 10-15-2007, 05:54 AM

Originally Posted by SparkyJJO

Petrastechshop.com

Out of stock atm.

iadstudio · 10-15-2007, 09:05 AM

There's plenty in Canada. Only problem is it'll cost $20+ to ship to the US.

**AAjax** · 10-15-2007, 03:38 PM

still hoping for a complete review on these

**SiGfever** · 10-15-2007, 03:57 PM

Received my nozzle kit from Petra's but will wait to do a tear down.

**LinusTech** · 10-15-2007, 04:14 PM

We've only got 5 left. Amazed at how fast these went. Some people are even ordering them from the states for $25 including shipping...

Thread: D-tek nozzles

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions