NVIDIA nTune v5.05.22.00 Released

[HamidFULL]

Download Here
OS : Windows XP (32-bit),Windows Vista (32-bit) for find more OS look www.nvidia.com

NVIDIA nTune Release Notes
Version Number Description:
5[Major version].05[Release version].00[Beta version].00[Alpha version]
Version 5.05.22.00
1. Fixed issue in which the "Game" rule is not handled properly
Version 5.05.21.00
2. Added support for Microsoft Vista 64-bit OS
3. Fixed issue in which auto-tune would not complete with a supported graphics card
using a driver that is not rel90 or later.
4. Added access to NVMonitor from the performance category view.
5. Fixed bug that temperature rule is executed incorrectly.
6. Fixed bug that tWR and tWTR memory timing values did not match the BIOS
settings in Intel CPU platforms.
Version 5.05.20.00
1. Fixed issue in which the clock readings on the GPU settings page don't get
updated when a profile is being loaded.
Version 5.05.19.00
1. Fixed issue in which temperature and fan RPM data would not refresh on the
Motherboard and GPU settings pages.
2. Fixed issue in which the Intel CPU FSB was not shown correctly on some
motherboards using NVMonitor.
3. Fixed corrupted text seen in some list box entries on the Dynamic BIOS Access
page.
4. Fixed issue in which nTune would exit when accessing certain pages like
Motherboard Settings when using an OS with a non-US language.
Version 5.05.18.00
1. Fixed issue in which CMOS is corrupted after save/restore of a profile.
Note: Previous profiles will no longer work with this build. Please delete previous
profiles in the profiles directory, as these will not have been removed from the
previous uninstall.
Version 5.05.15.00
1. Added feature to save/restore the original fan power when switch between Auto
and manual control.
2. Fixed issue in which launching NVMonitor takes > 2 minutes when in SLI mode
and intense graphics are running in the background.
Version 5.05.14.00
1. Fixed issue in which autotune would fail to launch on some nForce Intel
combinations.
Version 5.05.13.00
1. Expanded the ranged for FSB for certain nForce chipset and processor
combinations.
2. Removed “Memory Clock” displayed text from Motherboard Settings page.
Version 5.05.12.00
1. Fixed issue with displaying correct CPU Multiplier value on Kentsfield
processors.
Version 5.05.11.00
1. Updated Dynamic SBIOS Access fields for enabled systems.
Version 5.05.10.00
1. Updated voltage control steps for the nForce Intel platforms
Version 5.05.09.00
1. Fixed the CPU high usage consumption when running on a system with no
specific BIOS support but with GPU temp read back.
2. Added tWTR memory timing control to Motherboard Setting Page.
3. Fixed bug PCIe bus speed is not showed in correctly on some motherboards.
4. Fixed issue in which the Intel CPU multiplier and FSB were not shown correctly
on some motherboards.
5. Fixed the FSB voltage string on some motherboards.

[Okda]

anyone really use it ?

[Blauhung]

anyone really use it ?

perhaps if they make the interface a tad more user friendly.

[FghtinIrshNvrDi]

what does it do?

Ryan

[HamidFULL]

what does it do?

Ryan

Download complete guide here :
http://us.download.nvidia.com/Window...user_guide.pdf

Read it to find out more :

Overview:

NVIDIA® nTune is the ultimate utility for accessing, monitoring, and adjusting your system components, including temperature and voltages with clear, user-friendly control panels. Overclock your system for highest performance or underclock it for near silent operation. All changes are performed within the Microsoft® Windows® interface – enabling full functionality without the need to make changes in the BIOS and reboot your system.

Installation Notes:

This application package replaces all previous versions of the NVIDIA System Utility or NVIDIA nTune. Earlier versions of the application should be uninstalled and the system rebooted prior to installation of this package.
Support for the advanced features of the NVIDIA nTune requires vendor specific setup files that are not included with this package. Please contact your motherboard or system vendor for the correct files to enable this functionality.
Release Notes:

This is a complete, updated release of the NVIDIA nTune. You are not required to install a previous version of this application before installing the latest version.
nTune 5.05 adds support for GPU temperature monitoring and overclocking on all motherboards.
On nForce motherboards where specific BIOS support is not available, only basic functionality will be available.
Products support for advanced motherboard monitoring features:
nForce 220, nForce 220D, nForce 415 and nForce 420D
nForce2 and nForce2 400
nForce2 Ultra and nForce2 Ultra 400
nForce2 400R and nForce2 Ultra 400Gb
nForce3 150 and nForce3 PRO 150
nForce3 250, nForce3 250Gb and nForce3 PRO 250
nForce4 Pro 2200, nForce4 Ultra, and nForce4 SLI
nForce 590 SLI, nForce 570 SLI, nForce 570 Ultra, nForce 550
nForce 680a SLI, nForce 680i SLI, nForce 650i SLI, nForce 650i Ultra