DDRII 1000 CL3 is coming?!G.SKILL HZ DDRII 1026 3-4-4-9 @GIGABYTE 965P,BUT....

[n91htmare]

naa this is the kentsfield. Just look up at the first cpu-z screen. says Kentsfield

but dam, yet another 9.x spi, very nice coolaler!!!

Why correct other people when you don't know whats going on yourself ?

Read what he wrote... The first few screens were of kentsfield (being read by cpuz as 6700)... the next that followed were of X6800 (where he hit 4Ghz)... he CLEARLY wrote X6800@DDRII 1000 3-3-3-1......


I doubt Coolaler is wrong.

[ArcTan]

can you max out the fsb of the gigabyte board?

[Azh_fx]

nice resuls there, every few hours i change my mind on what board and memory to get lol

[MnM]

nice resuls there, every few hours i change my mind on what board and memory to get lol

I wonder what the price will be?

[WeedJunk]

Wicked!

Only so expensive...

[Andrewv]

Very nice results for GSKILL and P965

[BlackX]

naa this is the kentsfield. Just look up at the first cpu-z screen. says Kentsfield

but dam, yet another 9.x spi, very nice coolaler!!!

Code Name: Conroe
Read before comment

[Eastcoasthandle]

I figured PC8000/PC85000 would give better performance then PC6400. I bet the sweet spot is OC at 1:1.

[Kallenator]

incredible isn't it.........i'd love to see BH5 at those clocks.....

@coolaler......seems intel mobo is doing better with RAM timings but does it actually impact performance.....can you compare the two boards clock for clock with different timings......i wonder if Intel is slacking some other timings off to let you run at 3-3-3-1 instead of 3-4-4-9

http://www.xtremesystems.org/forums/...d.php?t=105089
337MHZ - 1.5-2-2-5 jmax_oc

Those sticks are truly nice Coolaler, when are they due to the stores?

[Onepagebook]

you guys try this yet? for those wjo already bought tg 667 haha



CPUV...



DDR1004...

[DARK SIDE]

Can someone please tell mi how to achieve RAM speed over 800mhz on "bad axe" and also set latency?It seems that,when i want to go over 800mhz i must set memory settings on "automatic" and then i dont have option to lower the latency.I have hyperX that can go over 900mhz with 4.4.4.11.I cannot achieve that on Intel bad axe in BIOS.

[Fixxxer]

I don't trust Bad Axe. Benchies under a different board, OPB?

[Metroid]

DDRII 1000 3-3-3-3 to get 9.sx,just piece a cake

That is good for overclockers that want to go higher than 4.5 with a ratio 1/1.

By the way that does not impress me.

I was expecting more.

Thanks for the preview Oldman.

[qwerty69]

Impressive results Coolaler! What are the ram voltages?

[cupholder2.0]

Wait, wait. Tell us more about this board

[Metroid]

Wait, wait. Tell us more about this board

It is a good 12 phase board with many options and it gets up to 360 with the new bios.

[cupholder2.0]

It is a good 12 phase board with many options and it gets up to 360 with the new bios.

What? I thought only th DQ6 had the 12 phase. This board is the DS3.

http://www.gigabyte.com.tw/Products/...me=GA-965P-DS3
Anyway 360 FSB is pretty decent, does it hit a wall at 360 or something? How is the bios?



Is there any info on the prices of these boards?
GA-965P-S4
GA-965P-DS4
GA-965P-DQ6

[Metroid]

What? I thought only th DQ6 had the 12 phase. This board is the DS3.

http://www.gigabyte.com.tw/Products/...me=GA-965P-DS3
Anyway 360 FSB is pretty decent, does it hit a wall at 360 or something? How is the bios?



Is there any info on the prices of these boards?
GA-965P-S4
GA-965P-DS4
GA-965P-DQ6

Sorry my bad.

I have confused 1 with the other.

This is 5 Phase power for budget. The official date is july 23 but I think it is coming before. The prices will be around 70£ or 120$. It can overclocks up to 320, but with a new bios might go as high as 975x is, may not be stable as 975x is.

Look more below.


PCI Express Frequency (Mhz)
Auto Set PCI Express frequency automatically. (Default value)
90~150 Set PCI Express frequency from 90 MHz to 150 MHz.

System Memory Multiplier
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533 Mhz,
3.00 Memory Frequency = Host clock X 3.00.
4.00 Memory Frequency = Host clock X 4.00.
2.00 Memory Frequency = Host clock X 2.00.
2.66 Memory Frequency = Host clock X 2.66.
3.33 Memory Frequency = Host clock X 3.33.
2.50 Memory Frequency = Host clock X 2.50.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800 MHz,
2.00 Memory Frequency = Host clock X 2.00.
2.66 Memory Frequency = Host clock X 2.66.
3.33 Memory Frequency = Host clock X 3.33.
4.00 Memory Frequency = Host clock X 4.00.
2.50 Memory Frequency = Host clock X 2.50.
3.00 Memory Frequency = Host clock X 3.00.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=1066 MHz,
2.00 Memory Frequency = Host clock X 2.00.
2.50 Memory Frequency = Host clock X 2.50.
3.00 Memory Frequency = Host clock X 3.00.
2.66 Memory Frequency = Host clock X 2.66.
3.33 Memory Frequency = Host clock X 3.33.
4.0+ Memory Frequency = Host clock X 4.0+.


Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency (Mhz) and System Memory Multiplier setting.
BIOS Setup - 45 -
English
DIMM OverVoltage Control

Normal Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V Set DIMM OverVoltage Control to +0.1V.
+0.2V Set DIMM OverVoltage Control to +0.2V.
+0.3V Set DIMM OverVoltage Control to +0.3V.
+0.4V Set DIMM OverVoltage Control to +0.4V.
+0.5V Set DIMM OverVoltage Control to +0.5V.
+0.6V Set DIMM OverVoltage Control to +0.6V.

PCI-E OverVoltage Control
Normal Set PCI-E OverVoltage Control to Normal. (Default value)
+0.1V Set PCI-E OverVoltage Control to +0.1V.
+0.2V Set PCI-E OverVoltage Control to +0.2V.
+0.3V Set PCI-E OverVoltage Control to +0.3V.


FSB OverVoltage Control
Normal Set FSB OverVoltage Control to Normal. (Default value)
+0.1V Set FSB OverVoltage Control to +0.1V.
+0.2V Set FSB OverVoltage Control to +0.2V.
+0.3V Set FSB OverVoltage Control to +0.3V.
(G) MCH OverVoltage Control

Normal Set (G) MCH OverVoltrage Control to Normal. (Default value)
+0.1V Set (G) MCH OverVoltrage Control to +0.1V.
+0.2V Set (G) MCH OverVoltrage Control to +0.2V.

[cupholder2.0]

Thanks a lot! Do you have any idea on how much the DS4 will cost? Looks like a very featureful board,

http://www.gigabyte.com.tw/Products/...me=GA-965P-DS4

[Metroid]

Thanks a lot! Do you have any idea on how much the DS4 will cost? Looks like a very featureful board,

http://www.gigabyte.com.tw/Products/...me=GA-965P-DS4

DS4 is for mainstream people surely will be around 90£ or 140$.

It is a nice board with 10 phase power and that can go a bit higher than ds3 around 360 default when it hits the street with a new bios can go up to 400.

[DARK SIDE]

puting the battery out of the board solve the problem..now ram works better...
BIOS is full of bugs...

[cupholder2.0]

DS4 is for mainstream people surely will be around 90£ or 140$.

It is a nice board with 10 phase power and that can go a bit higher than ds3 around 360 default when it hits the street with a new bios can go up to 400.

I think I found my board then

[Metroid]

I think I found my board then

I feel happy for you that you found, as for me I'm still waiting for the DFI Intel Edition 590 and probably it will appear just middle of August.

[Lestat]

DS4 is for mainstream people surely will be around 90£ or 140$.

It is a nice board with 10 phase power and that can go a bit higher than ds3 around 360 default when it hits the street with a new bios can go up to 400.

your wishful thinking is nice, but dont assume they will have a bios update that will let it go to 400mhz.

[Metroid]

your wishful thinking is nice, but dont assume they will have a bios update that will let it go to 400mhz.

Not now or next month but I think by setember will be something that get closer to that, with tweaks too.