Spi 32m @3803mhz for [CST]

[Xevipiu]

Hi, we're a small spanish team formed by 4 persons:

- ^don.k's^ (Donmoco)
- Cordovader
- Fixxxer
- Xevipiu

We're called Crazy Salters Team [CST].

· DFI SLI-Dr Expert & DFI NF4 Ultra-D
· 2x256 kingston khx3200 bh5 "339wf"
· Bequiet! 520w
· AMD 64 FX 57 0530APMW
· GeForce mx200 64mb pci


32m 253x15: 19:56.312s


8m 253x15: 4:16.125s


2m 253x15: 53.094s


1m 255x15: 22.547s


We made our first test w/ dry ice without having all the material and w/ a small container. It was bought to be used with our Dothan processors, but we finally used it w/ our FX57.




We expect having improvements next time, because we will use a better
container.

Regards

[^don.k's^]

Ey bro, you've posted pics of our fatidic attemp with the expert... I have to say that only ultra d was working good, expert didn't boot almost 1 of 6 times we tried to... Maybe corrupted OS install was doing that, we'll know soon...

[s7e9h3n]

Ey bro, you've posted pics of our fatidic attemp with the expert... I have to say that only ultra d was working good, expert didn't boot almost 1 of 6 times we tried to... Maybe corrupted OS install was doing that, we'll know soon...

Yes, you guys need to fix something On my Expert:





Nice cpu speed/vcore for you though

[^don.k's^]

Hopefully we'll ( me not, but the other team's members ) be testing with 2x512 old bh5 sticks in the expert soon, and we are praying for it to run ok... ^^ Also had problems with cold bug over 255htt... we'll say what we can do...

[afireinside]

32m @ 3.8 is great

Is that a copper mousepot? What are you going to have that's better? I have seen nothing better other than the 3" mousepots and the ice dragon, unless you guys have made something special...

[^don.k's^]

Yes, that's a copper moussy ^^, 2,5", we're searching yet for something better tho

[bachus_anonym]

Very nice guys! Another 3.8GHz 32M done But it seems like you could improve that time a bit. Looking at Guess2098 and Fredyama's 32M, there still around 20s to shave off...
Very impressive

[esdee]

Yes, you guys need to fix something On my Expert:


Nice cpu speed/vcore for you though

they don't have the bank interleave boost with 2x256 sticks...

[bachus_anonym]

they don't have the bank interleave boost with 2x256 sticks...

Oh, that's why... I did not notice 2x256MB part Thanks esdee Above results just got better then

[s7e9h3n]

they don't have the bank interleave boost with 2x256 sticks...

I don't have the boost with 100+ Mhz though

[afireinside]

Yes, that's a copper moussy ^^, 2,5", we're searching yet for something better tho

That's one of the best coolers around... Get a gig of ram first.

[wat0n]

great job, xevi

[gocchin]

Good stuff! For that extra boost go for a 3 inch mousepot... holds the load like you wouldn't believe:

[Fixxxer]

Well... that was only a first contact.

Now we're ready to get a run w/ 1 gig.

New results and surprises coming soon

[^don.k's^]

That's one of the best coolers around... Get a gig of ram first.

We have 2x512 capable of 270 easily, will be tested this weekend, they were mine, but im going to intel, so they go for "the team" We'll update this thread as soon as we get new results

[[XC] moddolicous]

Nice results. Cant wait for some faster time, hopefully below 19:30. Post an A64 tweaker shot so maybe we can give you some ideas/timings.

[Cordovader]

In the next few weeks we´ll try another run with the FX, this time all will be like it has to be. At least we hope it

At that time we only had 256mb stick of bh5, & we knew that the results wouldn´t go as high (in this case as low) as it would with 512mb sticks.

But as my friends said, it was our first time with dice, & we left some things because we couldn´t wait more to test a new level of oc for us

If it helps this is what the fx can do on air/water chilled/vapo ls:

Air (with BT, only trying tho reach the max freq)


Water Chilled


& Vapo LS (stock)


As ^don.k's^ said we found that the chip was cold bugged at 255fsb, could it be worst if we use LN2 or there´s a "unique" level of cold bug in each chip?

Anyways, next time i hope it will be better & we will post all the info necessary, altough next time it will be a dothan the tested chip

[shuRe]

off topic:
getting bored with stephen gloating about his better o/c's and being condesending.

Well done guys

[s7e9h3n]

off topic:
getting bored with stephen gloating about his better o/c's and being condesending.

Well done guys

Ummmm...if you think I'm here to put people down, then you're an idiot. The reason behind posting my screen is for comparison's sake. If you cared to notice, my spi time was faster @ a given speed. It always helps to see what changes can be made to improve upon someone's current times. Also, if you missed it, there's a " " at the end of my post to suggest I wasn't being serious. If I wanted to gloat, I'd simply show a spi run with none of my settings I used to obtain the result. Ask anybody here - I've always been available to help a fellow forum member, but I'm "shure" my contributions to the OC community can't compare to what you've done <-----(that's condescending). Next time, keep your little petty comments to yourself before you get your ass banned from these forums.....

[shuRe]

I appologise, it was obviously a miss understanding of the phrase "Nice cpu speed/vcore for you though"

I dont question your input to the overclocking community, but i do question how you throw your weight around like you own the forum (from your last sentance).

In the future i will not post my negative views in a thread.

In respect for the Crazy Salters Team (like the name btw ) lets end this now or continue it via pm's.

[co0Lzie]

3.6 on vapo ls is awesome!!

[s7e9h3n]

I appologise, it was obviously a miss understanding of the phrase "Nice cpu speed/vcore for you though"

I dont question your input to the overclocking community, but i do question how you throw your weight around like you own the forum (from your last sentance).

In the future i will not post my negative views in a thread.

In respect for the Crazy Salters Team (like the name btw ) lets end this now or continue it via pm's.

That's right - you did "miss understand" the phrase ""Nice cpu speed/vcore for you though" since that was meant as a follow-up to my first sentence at the beginning of the post. You really have no idea what you're talking about. Please PM me some evidence of me "throwing my weight around" these forums since that last sentence was in no way meant as a threat towards you. It was more of a suggestion since going around and making uncalled for comments about people is grounds for a ban

You are right about one thing, this needs to be continued in PM's. Sorry OP, and if you interpreted what I posted as gloating and thought that I was condescending, please make it known as I will gladly make a public apology if I offended you in any way....

[UTF Nightmare]

Yes man. Nice cpu speed @ low vcore as my upper neighbour says

Gonna get an Opteron 146 with that stepping
Hope he like's ICE...

[mongoled]

Yes man. Nice cpu speed @ low vcore as my upper neighbour says

Gonna get an Opteron 146 with that stepping
Hope he like's ICE...

I hope it like DICE too



Fantastic results Crazy Salters Team, again with a CABNE 0530APMW

[afireinside]

off topic:
getting bored with stephen gloating about his better o/c's and being condesending.

Well done guys

He isn't bragging but I've seen the pictures he posts so many times they're burned into my mind and I have nightmares about it

CST team> 1gb ram should help quite a bit. Go for 19:30!