Team Skootterit, E6600 100% OC, CO2

[Dani]

We had very nice OC weekend with guys (team members) again
Team Skootterit = Dani, boble76, Electroid and mikkomaa

Setup was:

ASUS P5B Deluxe (vMCH, vMEM, vDROOP, vCORE), NB watercooled by Swiftech MCW30, NB @ 2.01V.
E6600 L629A (lapped) @ 1.77V.
CellShock DDR2 PC2-8000 2x1024mb, 4-4-4-8 @ 2.85V.
WinXP Pro + SP2.
Half solid alu container, 61mm from bottom is solid with small center pole.
DryIce with methanol

SuperPI 1M


SuperPI 8M


SuperPI 32M


Hexus PiFast



Like you can see, Hexus and SP32M was not tested much, I think SP32M with 530x9 should do much more damage to result
..or Hexus_PiFast with 530x9, maybe high 19s.
We were absolute too drunk to think clear

Setup pic's etc. is uploaded till tomorrow here at first post, stay tuned

**Setup pic's**

[Boble76]

I feel so sick after that weekend.. LOL!
Next time with LN2 and copper-solid.
Thanks guyes! Awesome.

[TaPaKaH]

got pics of the rig?

[Dani]

Setup pic's etc. is uploaded till tomorrow here at first post, stay tuned

Yes, will do it as soon as possible

[AshkenAZoNi]

nice results :P

[before]

Great work here so far my friend

Interesting to see Vmch@2.01V, did it give a real improvement?

[Dani]

Great work here so far my friend

Interesting to see Vmch@2.01V, did it give a real improvement?

vMCH 2.01= we booted @ 398FSB

[Electroid]

btw. Dani 2.4G -> 4.8G = 100% oc , edit 1:st post.

Offtopic: Opteron 146 @ 3.45G @ R.I.P, LOL
some noob tricks

[Boble76]

Some setup-pictures
In the first picture is a startbox I made with mikkomaa. It was very easy and safety to boot without screwdriver. (in drunk).

Yellow/black tape was VERY TIGHT around the container.

[sierra_bound]

Nice results.

[damnnit]

Yes awesome results.

[before]

Some setup-pictures
In the first picture is a startbox I made with mikkomaa. It was very easy and safety to boot without screwdriver. (in drunk).

Yellow/black tape was VERY TIGHT around the container.

Nice pictures...

Insulation of the mobo is very clean.

[AshkenAZoNi]

I liked the insulation 2, nice pics and nice results.
do give us more

[Dani]

I like to made clean and airproof isolation, that's maybe the most usefull thing you can do before benching.
Here isolation on DFI Expert before LN2 benching

[Boble76]

The ASUS-MoBo isolation was simply the best I've ever seen, it worked very fine and there wasn't condensate anywhere. I think it took about 2h making those isolations on MoBo and container. It was worth of it.

[Dietka]

Very good, our Finnish stars are shining

[Solarfall]

sweet oc gues. seeing something like this makes me broud to be a Finn, keep on torturing those chips.

sorry for the offtopic but i have comment on something i saw in those pictures.
how the hell can you gues drink somethink that tastes like......worst than piss (meaning KOFF beer), KARHU is much better
BTW nice jop with the insulation, that thing fits perfectly.

[Dani]

Hey bro , dont blame KOFF, because Karhu is the same sh_it, you dont even know where Karhu is made...KOFF-Karhu=same piss

[Omastar]

Dani, I know this is off topic, but I just wanted to point out that the cat in your avatar is totally hot.

[ANP !!!]

Very nice work

[LittleDevil]

Great results

regards

[Dani]

Thanks to all

..hmm, my cat is HOT

[Solarfall]

Dani your were right koff and karhu are the same piss. they are made in the same factory in the lovelly city of Pori. heres the proof,

http://www.koff.fi/fi/tuotteet/oluet.html I fell so dirty

[Dani]

I know, but it's good beer
They bottles in Kerava and Pori, so slightly wrong again

http://www.adressit.com/porin_nalle

[Solarfall]

half right. thats good enough for me