This mod applies to nvidia reference PCBs (XFX usually does not apply)

XFX New PCB VMod Here

Materials...
Conductive ink
lead pencil (6B Work the best , Any will do)
Some good music
Chips and dip


Heres the backside of the card with the mod spots marked off



Take your conductive ink and draw a trace connecting these three components



Close up of Memory Resistor Shading mod



AND, For those of you with stock cooling or halfway decent air cooling

Here are smaller vmods , same traces though

on stock I wouldnt recommend going above 1.3v unless you have extremely low ambient temps



Heres The Cooling im using Gets me 32c idle and 34c load with 25c Amb


Results so far




Now Give yourself a Pat on the Back and have a nice Sandwich


Thanks for reading , Please leave feedback Also if you tried it please share your results