MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 1 of 3 123 LastLast
Results 1 to 25 of 51

Thread: 9500pro sapphire PCB volt mods

  1. #1
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955

    9500pro sapphire PCB volt mods

    hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory

  2. #2
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by Malachia
    hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory
    i have some experience with 9500pro vmods, could u post a detailed picture of your card, and what mem chips it uses

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  3. #3
    Registered User
    Join Date
    Jul 2003
    Location
    german town MD
    Posts
    56
    post some pictures i can help you out
    2100@2.55ghz / 2.8c@3.3ghz / 2500M@ 2.7ghz
    9500pro(softmod/vmod) 430core 335mem / 9600xt(vmod) 620core 745mem
    epox 8rda+ /abit ic7 max3

  4. #4
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    i will do them, memories are infineon 3.3, they took 330mhz without artifacts, core takes 380 without artifacts, all stock cooling(i have a wb not worry,these were just first prooves...)


    EDIT


    Last edited by Malachia; 11-05-2004 at 11:45 PM.

  5. #5
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    k heres the vmods:
    Attached Images Attached Images

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  6. #6
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    theres another pcb revision that has the same mods except if u do the vref and vddq mods as well, the other one looks like this:


    only the mem area in the bottom lef tis different afaik
    Attached Images Attached Images

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  7. #7
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    thx a lot!!!

    now these are my stock voltages


    core 1,524
    mems 2.84



    with watercooling how much volts i can give at core and at mems?

  8. #8
    Registered User
    Join Date
    May 2004
    Location
    Germany / NRW / Erkelenz
    Posts
    33
    core 2v
    mem 3v

    at least
    can be more
    I'm from Germany......my English is not the best

  9. #9
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    Quote Originally Posted by .::$k4T4N::.
    core 2v
    mem 3v

    at least
    can be more

    max???like 2v on AMD 32bit....

  10. #10
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    nvm

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  11. #11
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    Quote Originally Posted by blinky
    nvm


    i will beat yours 18500 3dmarks man, you know this
    wich is the best score for a 9500pro???

  12. #12
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by Malachia
    i will beat yours 18500 3dmarks man, you know this
    wich is the best score for a 9500pro???
    best is 18,700 by our own Jeff.

    i would have broken it but i killed my mobo

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  13. #13
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    Quote Originally Posted by blinky
    best is 18,700 by our own Jeff.

    i would have broken it but i killed my mobo


    well, i do 17300 stock cooling without mods, processor@2250mhz, evry 250mhz ares 1000points, i think that i can broke them!

  14. #14
    Registered User
    Join Date
    Jul 2003
    Location
    german town MD
    Posts
    56
    nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped . i used a 10 vr resistor for the core.
    2100@2.55ghz / 2.8c@3.3ghz / 2500M@ 2.7ghz
    9500pro(softmod/vmod) 430core 335mem / 9600xt(vmod) 620core 745mem
    epox 8rda+ /abit ic7 max3

  15. #15
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by mattsmall
    nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped . i used a 10 vr resistor for the core.
    i got 445 core with vga silencer, but that was with the mem down, my 9500 has power issues


    what cpu u on malachia? if i was on A64 i would be at 20k already

    mebe i could have a little race with ya

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  16. #16
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    i am on 754....then i will try to do something bettere than 19k
    i am whaiting for a clawhammer that do 2500mhz 1,6v rs air cooled....then i must search a wb that can hold 5x5 tecs...

  17. #17
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga

  18. #18
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by Malachia
    sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga
    i had to search through 25 pages to find this score, the 9500pro's are listed under 9700 non-pro

    this is the WR afaik: http://service.futuremark.com/compare?2k1=5886672

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  19. #19
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    Last edited by Malachia; 11-11-2004 at 07:15 AM.

  20. #20
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by Malachia
    heres my stock cooling no vmods: and i dont even have an A64:
    http://service.futuremark.com/compare?2k1=8170147

    gotcha beat


    im working on a -50c cpu cooler, and possibly another cooler for the GPU, so.... my 9500 will be freezing soon

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  21. #21
    Registered User
    Join Date
    May 2004
    Location
    Germany / NRW / Erkelenz
    Posts
    33
    malachia:
    try win 2k and tweak a little

    up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110
    I'm from Germany......my English is not the best

  22. #22
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    thx a lot!!!


    @blinky

    also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50

  23. #23
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    Quote Originally Posted by Malachia
    thx a lot!!!


    @blinky

    also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50


    sounds good bro

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

  24. #24
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Milan,Italy
    Posts
    955
    Quote Originally Posted by .::$k4T4N::.
    malachia:
    try win 2k and tweak a little

    up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110

    not avaible in my SO, don't know why...

  25. #25
    Xtreme Mentor
    Join Date
    Jan 2004
    Location
    Berkeley/Stanford, CA, USA
    Posts
    3,075
    malachia, if you get to a point where u cant make the mem go any higher, i can tell you the other two mem vmods.

    can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •