X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 1 of 3 123 LastLast
Results 1 to 25 of 62

Thread: Jadawgis's Golem

  1. #1
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121

    Jadawgis's Golem

    Golem is Yiddish for monster.

    So I’ve been in the planning stage of a new project for about 2-3 weeks. During that time I’ve looked at literally hundreds of worklogs and purchased a number of products (Thank you college grant money). I wasn’t originally intending to do a worklog but in an effort to give back to a community from whom I’ve taken back, I will keep one.

    My current rig is a Silverstone Raven RV02-B housing an ASUS P6X58D-e, i7 930, 2x GTX 470s in SLI, H50, 6Gb DDR3-1600, BFG EX-1200. To quiet the system down, since I’m an incessant tinkerer, enjoy projects, and love tech, and because it looks freaking sick, I’ll be going water on the next rig.
    Many people had advised me on upgrading the case. I bought the Raven two months ago and was originally very reluctant to do so. But finally, at Microcenter, who was having a sale on the Corsair 800D for $240, I acquiesced. So to sum up the parts I’ve got over the past few weeks:

    Watercooling:
    MCR-320QP Radiator
    MCR-220QP Radiator
    MCP-655-b Pump
    EK D5 X-Top Rev. 2
    EK Multioption 250ml Advanced Rev. 2 Reservoir
    Swiftech MicroRes Rev.2
    2x EK FC-GTX-470 GPU Blocks (Nickel/Plexi)
    Swiftech Apogee XT CPU Block
    XSPC Dual Bay Res/Pump (X2O 750)
    2 1000ml Bottles of Feser One UV (Purple)
    2 1000ml Bottles of Primochill Ice UV (Steel Blue)
    10’ Primochill LRT UV Blue 7/16”ID 5/8” OD
    10’ Primochill LRT Black 7/16”ID 5/8” OD
    20 Bitspower Shining Silver 1/2” ID Barbs
    2 Bitspower Rotary 1/2" ID Barbs
    1 Danger Den Blue Anodized Fill Port
    2 Gallons Distilled Water
    2 Gallons Distilled Vinegar
    Danger Den Syringe
    D Plug for SLI Connection

    MODDING
    Dremel 300i
    Sunbeam PSU mod tools (My hands are tore up from using other methods and wires I’ve practiced on have often needed new connectors and soldering)
    Lian Li Universal Drive Cover C-02B
    100’ 1/8” Clean Cut Via Furryletters
    50’ 1/4” Clean Cut Via Furryletters
    Assortment of Aquamarine/Black Sleeving from MDPC
    **One note I would add here: Over the past 4 months I’ve spent an obscene amount of sleeving from all around the net. I really didn’t want to pay the premium for MDPC sleeving. Well, I’ve paid for it. Most of the stuff was unusuable and will never see the light of day. The only stuff I found that was worth a damn (and won’t show a yellow wire underneath) was Furryletters Clean Cut sleeving on eBay.**

    OTHER HARDWARE
    Corsair 800D
    Creative X-Fi Titanium Fatal1ty
    Lamptron FC6
    3x Yate Loon 120mm D12DB (At school now, will check when I get home)
    4x Scythe Gentle Typhoon 120mm (1450RPM)

    So the plan is to create two loops:
    LOOP 1 (CPU Loop)
    Danger Den Fillport -> EK Multioption 250ml -> MCP-655-b -> MCR-220QP -> Apogee XT -> EK Multioption 250ml

    LOOP 2 (GPU Loop)
    XPSC Dual Bay Res/Pump -> MCR-320 -> GPU 0 -> GPU-1 -> GPU-2 -> XPSC Dual Bay Res/Pump

    So that’s the plan. Over the coming weeks I’m going to be stocking up on my understanding of photography. I’ve ordered a 53” Tripod and hopefully my Canon 590 IS will be up to the task. If not, well, there are ways around that. One of the great things about the most notable worklogs I’ve gone through (builds from Laine, Charles h) are the pics. I would love to be able to show off my work as well as them, but I’ll settle for takings pics that aren’t blurry.

    I’ve also been moving things around in the room that the computers are housed. I’ve taken out a couch and purchased a few more Galant desk parts to add to my collection. New rug, clock, intense cleaning and wire management all figured heavily into the process.

    Any advice/change to the loops would be welcomed. I will need to get some experience with the dremel before taking it to my 800D for the bottom 220 radiator placement. Actually I'll need a ton of experience before I'm comfortable taking a power tool to my $250 case.

    CURRENT PROGRESS




    Last edited by jadawgis732; 12-04-2010 at 05:36 PM.

  2. #2
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    I do! I just had to wait until the post was approved to actually post in the thread. 6-7 updates coming up:
    So here's how the room was 3 months ago:



    And here's how it is now:



    Here's the stuff that's been delivered:


    The Beast I'll be working with:


    And I'm still waiting on some parts.
    Vandal Resistant Bulgin Latching Switch for CCFLs
    5mm LEDs
    Needle File
    More Heatshrink
    M4 Tap
    A few others I cant think of...

    At the time I took this pic, my 320 rad was in the garage after being painted. Well, apparently I didn't move it over far enough, because coming back from home depot this morning, I pulled in the garage, I felt
    a distinct bump. Sort like when you run a hobo over but to avoid having it come back to bite you in the ass you back up over him a little at low speed. Well my rad is deformed but not severely. I'll try a c clamp
    but I'm not sure it won't leak now and the fan holes might be useless.
    Last edited by jadawgis732; 09-27-2010 at 09:02 PM.

  3. #3
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    So the res is airtight....the fan holes didn't align but I took care of that. Hammer and c-clamp style. Had to mod the dualbay to fit it in the 800D:



    I realize it's upside down. Just a mockup really...


    Also worked on some cable management today, and cleaned up.


    All those wires will be off the floor sometime between now and sunday night.
    Last edited by jadawgis732; 09-27-2010 at 09:05 PM.

  4. #4
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    MDPC sleeving arrived today, did some leak testing overnight.





    Last edited by jadawgis732; 09-27-2010 at 09:05 PM.

  5. #5
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    Updates
    So first I did some leak testing. Because I didn't want to cut up my Primochill Black any more than was necessary I used a small piece of clear. It was showing a lot of bubbles even after bleeding as best I could. Do you guys know how to get rid of that?



    Next I used my Raven RV02 because the 800D hasn't been modified yet for the bottom 240 Rad. But oh wait! I can't find the package from one of the EK GPU Blocks containing the cardboard spacer, the metal bracket which goes around the die, the plastic spacers and screws to hold it on!?! I assume it wasn't in the package. Well I had both cards on the chopping block ready to go, so I just installed one and I'll email EK and PPCS, hopefully one of them can help me out. The system is running fine (knock on wood) and hopefully I won't have any problems. I really like the way the block shows the fluid. Varrr nice.




    Last edited by jadawgis732; 09-27-2010 at 09:09 PM.

  6. #6
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    Another update. Found my second EK bracket hiding in my closet, and really wanted my 3rd display back which meant draining (for the first time in a live loop) and refilling. All went smoothly (I think) aside from sustaining a minor injury while using a pliers to pull a 1/2" barb from a 7/16" tube. The pliers slipped, my thumb was in the worst possible place and the skin turned purple in literally seconds. Pics to follow.

    First an image of the block that was in use over the past 24 hours. The loop was using Feser One UV Purple. The block looks like it has cracked or the coolant damaged the acrylic. Does anyone know what this is about?



    Next I'm leak testing with both cards installed. By the way EK emailed me within a few hours to set up a replacement for the metal bracket and screws which I found. Good customer service.





    I have no clamps but no leaks either (yet) but I've read multiple times that 7/16" ID tubing on 1/2" barbs doesn't require clamps. The GPUs are connected with a D-Plug which I think looks very nice. Finally my thumb. It hurts. Bad. This image was taken 2-3 minutes after the mishap, and it's even worse now. So word to the wise: if you really want to use pliers to pull off a stubborn fitting make sure your thumb is not in the way when they slip.




    On a side note, I'm very impressed with the temps on only a 240 rad! 53C 51C on the gpus during a vantage run. Don't know how this compares with others' builds but it's a good 40C lower than air. And totally quiet, which is new to me.
    Last edited by jadawgis732; 09-27-2010 at 09:09 PM.

  7. #7
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    UPDATE: Sleeving FC6 Leads

    So as I said in the first post I've spent a lot on sleeving over the past few months, since I was reluctant to pay the premium for MDPC sleeve. So much so that I've had to get a bin to store all the sleeve in:



    The only good sleeve I did find in my frenzy of clicking the submit order button were "Clean Cut Sleeve" on eBay from the seller FURRYLETTERS. That stuff is great. But I did eventually break down and order some MDPC sleeve. I did this for two reasons. The first was to see what sizes "small" sleeve and "sata" sleeve were. The second was because I could never find clean cut sleeve in anything but black. Well now that I have the sleeve in my hands I can show you it next to clean cut sleeve.


    Want to take a guess as to which is which? I couldn't notice a difference either. The only way I was able to differentiate is that the MDPC sleeve was secured by a black zip tie and FURRYLETTERS secures her stuff with a white one.

    Random Shots:






    Here is the fan controller leads I've made using 1/8" clean cut and some SATA cables sleeved in 1/4" clean cut. Since I couldn't notice a difference between MDPC sleeve and the clean cut stuff I went ahead and used clean cut for the fan controller leads, since I got 100' of it for like $16 shipped. I hope Nils won't mind my post here, I won't post it anywhere else, so as not to give it too much exposure. If Nils wants me to take it down I will. I understand that this may be some secret sauce which is kind of like intellectual property in that it is perhaps a trade secret.





    Two tips I would have for beginners are first, when you have the cable sleeved and the two pieces of heatshrink on and ready to go, don't jump the gun. Put the connector back on first so that the heatshrink can be slid down accordingly. Second, stretch out the sleeve to it's limit before tightening the heatshrink. Apparently that "closes the weave structure." I only learned both today, so the SATA cables weren't done using the latter method.
    Last edited by jadawgis732; 09-27-2010 at 09:15 PM.

  8. #8
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    And there's more... I got my the sickest 53" tripod EVAR for $7.99 plus like $8 shipping. Thing is, I'd like to be able to take pics like Laine and oliverw28 but I can't afford a dSLR. So I got this amazing tripod instead. Seriously the ingenuity built into this thing. There's a quick release for the mounting plate which the camera screws on to. I didn't know what it did at first. Guess that'll teach me not to press buttons on a machine my $140 (I'm a cheapskate) camera is mounted to. All is well though. There is a level on top of the tripod. Three locking legs. A winch to raise/lower the camera once the legs are locked in. There's seeming more pivots up top than there are dimensions in space time. Seriously this thing is amazing, and the steal of the century. I'll provide a link down bottom.




    I also stopped by radio shack on the way back from class to investigate my terminal strip idea. Good idea, because the strip, a perfect project box to mount it in, and several other items were there for cheap. (Did you guys know they have molex male/female pins?!?) Finally does anyone know if the crimper I chose for ATX female pins and the extractor I chose for removing bad ATX female crimps are the right tools for the job? It would save me some time...



    Here's the tripod link. Haha I thought the link said "ass product" at first http://www.amazon.com/gp/product/B00...ef=oss_product
    Last edited by jadawgis732; 09-27-2010 at 09:15 PM.

  9. #9
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    And there's more. I'm getting a ton of stuff done today. Finally finished painting the 360 rad. The same rad I ran over with my car! You can see the bend that I've tried to coax back into place several times, to no avail. It's still airtight, hopefully it'll be alright in the case. I also tried to snap a pic of my dog since all worklogs have pet pics. Unfortunately my basset hound is terrified of all cameras, especially ones with flashes. I was hoping he'd have gotten over it by now, but nope. He's still as difficult to photograph as the Shroud of Turin.




    My Rad Fin Masking Method. That's patent pending, yo.

    Last edited by jadawgis732; 09-27-2010 at 09:24 PM.

  10. #10
    Xtreme Member
    Join Date
    Aug 2010
    Location
    San Jose, California
    Posts
    112
    Looks great so far. I love your choice of colors.

  11. #11
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    Update 9/23/10: Ideas and Arrivals


    Between yesterday and today a ton of stuff showed up. I got my cordless drill, riveter & rivets, 3 cooler master R4s (not sure if they’ll be used in the final build), Blue Primochill LRT 7/16” ID 5/8” OD, USB Hub (a proper one), Dremel Straight Edge and Circle Cutter, Primer, Black Satin, both Rustoleum, Corsair Memory Cooler, Lian Li cable clamps, Lian Li DVD bezel, a Lamptron CCFL inverter, and a few other bits and ends.

    I started cutting a piece of acrylic to mount over a terminal block. I realize the sides aren’t even yet, I’ll probably sand them to get a closer cut. I was using reinforced metal cutting discs with a dremel, since I don’t really know what the best tool to use is yet. That reminds me, if anyone here is good with power and electricity please help me here:
    http://hardforum.com/showthread.php?t=1549211


    Oh, and what’s that? It’s a Steelseries 7G, of course! I couldn’t stand the lights so I pressed some a thin strip of electrical tape on, and poked holes over the LEDs.
    Last edited by jadawgis732; 09-27-2010 at 09:24 PM.

  12. #12
    Xtreme Design
    Join Date
    Aug 2009
    Location
    Central Texas
    Posts
    469
    Dremel should work fine and give you perfect cuts with acrylic, though you need to cut at a very low rpm so it acts like sandpaper. Also Dremel makes plastic cutting wheels, and I prefer those.

    Also, it might sound silly, but clamping the piece down and using a small, fine, hacksaw is great for longer cuts where you want it to be even. Just use a straight edge to score your cutting line (you should do this for the dremel too) making sure to go across several times to get a deep mark.
    -------------------------------
    Not From Concentrate
    All Projects
    Previous Projects:
    S3 Mini ITX Chassis
    The ArK
    Uriel
    Israfel
    Veritas
    Eldritch

  13. #13
    Moderator
    Join Date
    Aug 2007
    Location
    Back and forth between Florida and Maine
    Posts
    4,097
    Nice project - please let me know if you'd like it moved to the Worklogs section in the Liquid Cooling area.

  14. #14
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    If you think that's best Shazza, perfectly fine by me. @NFC Score it how, with a dremel? Thanks for the input too!

  15. #15
    Xtreme Design
    Join Date
    Aug 2009
    Location
    Central Texas
    Posts
    469
    Don't use a dremel, I use a needle file which makes a mark that is about the same width as the plastic cutting dremel blades I use. You could just use a razer blade though the mark might be a tad bit to skinny.
    -------------------------------
    Not From Concentrate
    All Projects
    Previous Projects:
    S3 Mini ITX Chassis
    The ArK
    Uriel
    Israfel
    Veritas
    Eldritch

  16. #16
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    No problem. I'll take pics of the progress for future updates. I also got that Dremel Straight Line cutter, that could come in handy. I got it because I do NOT want to mess up on the cuts for the bottom 240 rad. If you notice I've been getting a ton of tools because I have never had them, and I figure now is as good a time as any (how I hate that phrase) to get them. Needle File it is! I need a stepping drill bit while I'm at it (effing expensive everywhere I looked so far), and an M4 tap too. How I love tools!

  17. #17
    Xtreme Design
    Join Date
    Aug 2009
    Location
    Central Texas
    Posts
    469
    I decided to take some pictures, because battlenet is down and I can't play StarCraft II. =(

    Let's say I have this piece of scrap acrylic laying around...because, well, I do =P


    I clamp my straight edge to the acrylic, like so:


    I usually use my needle file, but I found something you are bound to have, a mini philips screwdriver:


    I scored it by going across two or three times:


    The dremel follows the path very nicely--I used the reinforced disk like you have (normally I use the plastic cutting disc)


    Straight edges all around, the dremel is a powerful tool!



    Yeah they are blurry. Sorry. =(
    -------------------------------
    Not From Concentrate
    All Projects
    Previous Projects:
    S3 Mini ITX Chassis
    The ArK
    Uriel
    Israfel
    Veritas
    Eldritch

  18. #18
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    No that's great! Thanks so much man! I actually just checked out at Amazon, needle file, pick set (dental picks but looks awesome for loosening ATX pins, because every single one in my 24 pin is TIGHT) 4 stepping bits and an m4 tap for $45- less than the one stepping bit at home depot. Again thanks for the pics, I'll be getting on that tonight or tomorrow afternoon.

  19. #19
    Xtreme Design
    Join Date
    Aug 2009
    Location
    Central Texas
    Posts
    469
    Oh, if I would do it over again, I would just buy a top of the line dremel (instead of the three I stepped up through), the quick change accessory kit ($20 with a bunch of discs) and the top end rotozip. Once you dive into the higher end modding get a drill press. I've not been too impressed with my step bit, it was too costly and my 20 dollar set of crappy black and decker bits have been just fine despite being abused on an entire 10x5' sheet of 5mm aluminum (use lots of lube). I just bought three Rigid hole saw cutters for 60mm 80mm and 120mm fan holes and that pretty much set me.

    Every other tool (besides my table saw) has not been a waste, but I could definitely live without them and I wish I spent the money on materials or PC parts instead. And yeah, you will need a tapping set--for that do NOT go cheap, you can get by with cheap drill bits and halfway decent holesaw cutters but you need to spend the $$ on quality taps from Mcmaster or another reputable source.

    Cool project btw.
    -------------------------------
    Not From Concentrate
    All Projects
    Previous Projects:
    S3 Mini ITX Chassis
    The ArK
    Uriel
    Israfel
    Veritas
    Eldritch

  20. #20
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    Thanks man. I am building a workbench sometime over the next week. A friend said just make two A Beams and lay a sheet of plywood across the top, sand and polyeurethane everything and attach some pegboard to the back. I got a Irwin Tapping kit, but I think the M4 0.7mm tap I got may be cheap. Flute tipped...I could stop the order if you advise me to. Here it is: http://www.amazon.com/Dormer-High-Sp...5301207&sr=1-1 EDIT: temporarily out of stock oops. I'll find one on mcmaster and see what shipping is like. EDIT2: That's an extremely daunting website! I can't decide, having been spoonfed with pictures & reviews all my life!

    Also, I saw the Roto Zip of Death on the Murdermod 008 worklog. Looks cool, but like Charles h said I don't want to end up with one arm. Unfortunately the project is a bit stalled until I figure out what to do with my molex connections. I like the idea of the terminal block, here's the inspiration. This guy did a GREAT job with the idea: http://www.xtremesystems.org/forums/...postcount=1461

    I also am fearful that too many connectionswill clutter up the terminal board. If that happens I might do this:


    (That MS Paint took so much longer than I had expected) Best artwork I've ever produced
    Last edited by jadawgis732; 09-23-2010 at 08:40 PM.

  21. #21
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    New update, and it’s a doozy. Yeah, I just used the word “doozy” in a sentence. Does that make me gay? Kind of, yeah….

    Anyway, I found my solution for a hub.

    I dropped by a local electronics store and when I was walking to the register I saw a wall full of these things. Most had 4 inputs and 1/3 outs, but this one was just right. It’s a 24k multifuse block, which ended up costing $15. While it’s perhaps not the most elegant solution, I think it looks cool. And if I don’t end up using it I can always bring it to a pawn shop. I can probably get like $150 for it, easily. It took 2 hours to get it rigged up and sleeved, and the sleeving still isn’t right. Oh well, there’s a solution to that. . . When I was about to switch on the power supply I can’t tell you how nervous I was. This probably has something to do with the fact that each of the last 3 splices to molex wiring jobs I did failed. It turned out to be that I had the 12v+/- pins in the 5v spots. You live you learn….

    As I said I switched on the PSU and to my amazement it actually worked the first time! I continued to plug more components in, and they all worked too!


    That last pic must have been a really fast exposure because you can see the fans are spinning around 1000RPM and they appear to be still in the pic. I realize nearly half the LEDs in my sunlight stick are done. Oh well, they’re cheap. I might change the name of the build to the money pit…. If you’re wondering why the Lamptron inverter and FC6 are taped it’s because I love how scratches make anodized aluminum look.

    Anyway, here is the final product.

    And a last shot for giggles.
    Last edited by jadawgis732; 09-27-2010 at 09:24 PM.
    Jadawgis's Golem

    i7 930 4.2Ghz Asus P6T 6Gb Corsair DDR3 1600 GTX 470 SLI 80Gb X25-M G2 1Tb CaviarBlack X-Fi Titanium Fatal1ty BFG EX1200W Silverstone Raven RV02BW
    Corsair H50 3x Samsung 2343BWX

    Current Build: 800D EK Nickel/Plexi GTX 470 Apogee XT MCP-655 w/ EK X-TOP V.2 EK Multi Advanced 250ml 360 & 240 Rads w/ Gentle Typhoons P6X58D-e X-Fi Titanium Fatality

  22. #22
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    So while I'm waiting for a few other things to come in, I figured I'd cut up my case and install a fillport. I ran into a problem while removing rivets in order to remove the bottom hard drive cage. Hopefully someone out there knows what I should use. I was following Mr. Armageddon's instructions: http://www.flickr.com/photos/2470552...7622328385917/ when it came time to remove these rivets:
    On his instructions he says he uses a "Dremel Tool" but here are my tools and I see nothing that would help. Anyone have any ideas?

    Used a 1/8" bit for the front rivets.

    Removed the hard drive cage braces by removing these two screws:

    Jadawgis's Golem

    i7 930 4.2Ghz Asus P6T 6Gb Corsair DDR3 1600 GTX 470 SLI 80Gb X25-M G2 1Tb CaviarBlack X-Fi Titanium Fatal1ty BFG EX1200W Silverstone Raven RV02BW
    Corsair H50 3x Samsung 2343BWX

    Current Build: 800D EK Nickel/Plexi GTX 470 Apogee XT MCP-655 w/ EK X-TOP V.2 EK Multi Advanced 250ml 360 & 240 Rads w/ Gentle Typhoons P6X58D-e X-Fi Titanium Fatality

  23. #23
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    This will be a minor update, just wanted to tell a funny story about me and rivets and our (thus far) tumultuous relationship. So, it’s just taken me 4 hours to get a single pop rivet into the front of my case. Why? Because Stanley was kind enough not to include any kind of documentation with their tool, that’s why. The first rivet did not separate from the tool and I had to use a dremel with a reinforced metal tip to cut it off. I was stupid enough to SEE the sparks flying and still not don any kind of eyewear. After I returned from the emergency room, I started up again, this time making sure to wear protection. But seriously, after the spark landed in my eye, just as I was starting to scream, the dremel slipped and you’ll see the result of that in the pictures. To give you an idea of how big the corsair 800D is you can use the imprint my metal cutting disc left.
    So anyway after I got that rivet out, I realized my rivet gun wouldn’t work. Apparently it had eaten the long end of the rivet I had tried to use. So I put the pointy end of a safety pin in the riveter in an attempt to loosen whatever was blocking it. It ate that too. Then I tried using the point on my corn-on-the-cob holder which I also use for stubborn ATX pins, the greedy bastard ate the corn-on-the-cob holder. Then, during a mixture of screaming and rage infused use of a flathead screwdriver being used in a stabbing like motion I managed to get an exploded view of a riveter.
    There were about fifteen assorted miniature parts, springs, nuts, bolds, a squashed safety pin and a corn-on-the cob holder strewn across the rug. After crying for a little bit, right as I was making that hyperventilating sound kids make after a good cry, I resolved to fix it and then write a very witty review on Amazon about how much the product sucked. Fast forward two hours, I watched a youtube and figured out that I needed to use the right sized head for the job. To my amazement it actually worked, and I was very proud of myself.
    Amazon is not being helpful either. After that episode, I was going to unload all my highbrow criticisms of the Stanley MR33C but the Write a Review page wouldn’t load. So my aggression carried over and I right clicked on the link and opened a new tab. 200 times. Was that a bit excessive? Maybe Will they be hearing from me on it? No, they’ll be hearing from my lawyer along with a bill for my medical costs. I’ve also still not recovered the end of the rivet as you can see in the last picture.
    Just to show you all the tools I used, and the victim of riveter-on-corn-on-the cob violence:

    The unspeakable, satanic, piece-of-$#!&.


    The rivet that took 4 hours and an emergency room visit to install, and the damage to the case:


    And the broken off rivet:
    Last edited by jadawgis732; 09-27-2010 at 09:25 PM.
    Jadawgis's Golem

    i7 930 4.2Ghz Asus P6T 6Gb Corsair DDR3 1600 GTX 470 SLI 80Gb X25-M G2 1Tb CaviarBlack X-Fi Titanium Fatal1ty BFG EX1200W Silverstone Raven RV02BW
    Corsair H50 3x Samsung 2343BWX

    Current Build: 800D EK Nickel/Plexi GTX 470 Apogee XT MCP-655 w/ EK X-TOP V.2 EK Multi Advanced 250ml 360 & 240 Rads w/ Gentle Typhoons P6X58D-e X-Fi Titanium Fatality

  24. #24
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    Yeah, this is my first worklog. I'm still learning...

    Anyway, I've made progress. Cut up the bottom of the case using a jigsaw. I used a dremel to start cuts along edges and it is about 10x slower than a jigsaw. I also installed a fillport.

    I used the back of the Rad Grillz 240 grill box as a template:

    And began cutting. Here is the finished result:

    I crapped the bed on the installation of the fill port.


    But ran out to Home Depot for a washer and a magnetic screw (or metal shard) pickup. I widened the center of the rubber washer with good old fashioned scissors and installed.

    But then I noticed something that made me vomit on my new rug (in red above [the catastrophe not the vomit]). I still can't figure out how it happened but I'm guessing when I was sweeping the underside of that piece with the magnetic wand it made a shaving scrape across the surface. More likely a shard landed on the mat or rug that I was using to protect the surface and when I was picking it up to carry it in it scraped on the rug (and shaving).

    Two questions I have are is the exposed dremel cutting disc in the picture below done for? And I got two switches for CCFLs, I don't know which I'll use yet. One is a latching vandal proof 22mm bulgin type switch and one is a blue dot LED rocker switch, also 22mm. Which should I use and would mounting it to the right or left of the fillport look awful? The fillport is perfectly centered and I would mount it the same distance back from the front, over maybe 1.5-2 inches.

    Last edited by jadawgis732; 09-27-2010 at 09:25 PM.
    Jadawgis's Golem

    i7 930 4.2Ghz Asus P6T 6Gb Corsair DDR3 1600 GTX 470 SLI 80Gb X25-M G2 1Tb CaviarBlack X-Fi Titanium Fatal1ty BFG EX1200W Silverstone Raven RV02BW
    Corsair H50 3x Samsung 2343BWX

    Current Build: 800D EK Nickel/Plexi GTX 470 Apogee XT MCP-655 w/ EK X-TOP V.2 EK Multi Advanced 250ml 360 & 240 Rads w/ Gentle Typhoons P6X58D-e X-Fi Titanium Fatality

  25. #25
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    121
    double post sorry
    Jadawgis's Golem

    i7 930 4.2Ghz Asus P6T 6Gb Corsair DDR3 1600 GTX 470 SLI 80Gb X25-M G2 1Tb CaviarBlack X-Fi Titanium Fatal1ty BFG EX1200W Silverstone Raven RV02BW
    Corsair H50 3x Samsung 2343BWX

    Current Build: 800D EK Nickel/Plexi GTX 470 Apogee XT MCP-655 w/ EK X-TOP V.2 EK Multi Advanced 250ml 360 & 240 Rads w/ Gentle Typhoons P6X58D-e X-Fi Titanium Fatality

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •