3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[websmile]

Yes, the 2000 C7 are a complete tri-channel kit, the first 2200 C8 were a dual channel kit- the single green 2200 C8 stock seems to be older, SPD says 30/09, the dc-kit spd says 11/2010- maybe you are right, I haven´t had the time for extensive testing yet, but the stick does well, doing 1116 at 1,63 on first test on funcztion with memtest 86 to see if it works

[BeepBeep2]

They are all MGH-E even green PCB.

[Barr3l Rid3r]

They are all MGH-E even green PCB.

Good to know, so best shot today I would say 2133Mhz C8 for $180


I was scared that only a few of them are mgh-e

[TheBlueChanell]

If I were to purchase a kit of the ST hypers which one should I pick?

2x of these:

http://www.ewiz.com/detail.php?name=...2GB-CL7-Memory

or

1x of These

http://www.ewiz.com/detail.php?name=...nel-Memory-kit

Which do you think would give me a better overclock? Have the PCB's been straightened out? I'd prefer a black PCB?

Is there a 3x 2gb that's better binned? I'm running AMD but I wouldn't mind picking up a 6gb kit if it'll net me better performance. The third stick would come in handy to when I get around to playing with an i7.

[eva2000]

get the 2x 2GB 2200C8 http://www.ewiz.com/detail.php?name=...nel-Memory-kit

I am not sure that Corsair bin the Hyper better- I am very satisfied with my STT, the 2200 C8 as well as the 2000 C7 Project X- they are way beyond the specs Memtest86 stable and if I hadn´t problems with IMC/Board Combi which only allows me to test 32M with straigt timings to 1150 ca. I would have reached more than 1140 C8-8-8-24 at 1,66V

From what i've seen of folks GTX2 results they are about 25-50mhz better than super talent 2200mhz on each cas 6, 7, 8 setting at the same voltages - but for most folks price would be determining factor. 6x2GB Super Talent 2200C8 at US$650 including shipping to OZ vs 6x2GB Corsair GTX2 2250C8 at US$1,500 excluding shipping costs. Difference in price you could get a 240GB Sandforce SSD or 2x 120GB Sanforce SSDs for raid But if you need every ounce of performance for record breaking probably would need GTX2

[websmile]

Well, maybe you are right, I haven´t had DDR3 Corsair because the performance on DDR2 was terrible and I refused to waste my money at ram which was that expensive- but as said I am very satisfied with my STT- heres a quick test, Rams are Memtest86 stable at these settings, but my IMC/Board combi limits me in windows with straght timings
http://www.abload.de/img/2000c7114032m163v54lz.jpg

[Barr3l Rid3r]

Baby arrived

It can pass trough test 5 @ 1680Mhz C6-6-6-19-25 1.63v
or 1750Mhz 6-6-6-19-25 1.70v

Definately better then my old Dominator GT 2000 C8

[BeepBeep2]

Baby arrived

It can pass trough test 5 @ 1680Mhz C6-6-6-19-25 1.63v
or 1750Mhz 6-6-6-19-25 1.70v

Definately better then my old Dominator GT 2000 C8

Your results make me want to ...punch things.

Is that totally stable? I can do 32M and stuff at 1766.

[Barr3l Rid3r]

Your results make me want to ...punch things.

Is that totally stable? I can do 32M and stuff at 1766.

Why? the results are about the same as yours.

totally stable in memtest but windows 7 sux , I cant boot @ 1766Mhz 6-6-6-18-24 w/ 1.70v but I could @ 1840 7-7-6-19-25


But I can run cinebench @1733Mhz 1.70v w/ DMM on the IC leg, HWmonitor and bios tells me that is 1.65v (is ther any voltage loss from the VDDR RM leg to the memory IC?

[BeepBeep2]

Why? the results are about the same as yours.

totally stable in memtest but windows 7 sux , I cant boot @ 1766Mhz 6-6-6-18-24 w/ 1.70v but I could @ 1840 7-7-6-19-25


But I can run cinebench @1733Mhz 1.70v w/ DMM on the IC leg, HWmonitor and bios tells me that is 1.65v

*wipes sweat off forehead*

Great.

Had a feeling those clocks were stable in windows.

EDIT:
Not sure about that voltage loss thing. If your board is ov'ing by .05v I'd be concerned.

[Barr3l Rid3r]

*wipes sweat off forehead*

Great.

Had a feeling those clocks were stable in windows.

EDIT:
Not sure about that voltage loss thing. If your board is ov'ing by .05v I'd be concerned.

hehehe, I think our problem still beeing the IMC...

It's overvolting since it cames out of the box, 1.75v gives a killer 1.80v hehehehe


I'm not sure I'm measuring the right spot but it changes when I change the VDDR.

[BeepBeep2]

hehehe, I think our problem still beeing the IMC...

It's overvolting since it cames out of the box, 1.75v gives a killer 1.80v hehehehe


I'm not sure I'm measuring the right spot but it changes when I change the VDDR.

What are you able to get with CAS 7? You've got Thuban.

[Barr3l Rid3r]

What are you able to get with CAS 7? You've got Thuban.

I got an 790fx board also, maxxed out at 1876Mhz Cas7-7-6-19-25 1.74v

anyway my new 1095T sux, I could reach NB 3100Mhz w/ 1050T and cant get anything stable after 2900mhz w/ 1095 now... but unless I can use my ram better now.

[BeepBeep2]

I got an 790fx board also, maxxed out at 1876Mhz Cas7-7-6-19-25 1.74v

anyway my new 1095T sux, I could reach NB 3100Mhz w/ 1050T and cant get anything stable after 2900mhz w/ 1095 now... but unless I can use my ram better now.

You do mean 1090T, right?

If you are thinking of letting either of those two go let me know.

[Barr3l Rid3r]

You do mean 1090T, right?

If you are thinking of letting either of those two go let me know.

Why?
they still available at ewiz.


but I will sell one of the kits.

actually 2 of them (1 of STT and 1 of Dominator), but will be priced as gtx2, Brazilian custummer is very crude 60% !!!

[Johnny87au]

Am i missing something? because 6/6/6/19 is good but my gt's can do 6/6/6/17 @ 1760??? im not sure what im seeing so special? i know these are cheap but hey..

[Barr3l Rid3r]

Am i missing something? because 6/6/6/19 is good but my gt's can do 6/6/6/17 @ 1760??? im not sure what im seeing so special? i know these are cheap but hey..

Im at old 790fx w/ crappy 1090T IMC EPAW

yours are 1600 c6?

playing at cas7

[Barr3l Rid3r]

This is starting to get really fun

[BeepBeep2]

This is starting to get really fun

Check AMD section for some stuff I just released.

[Tomasis]

barrel rider, nice what bios? f8k?

[Barr3l Rid3r]

barrel rider, nice what bios? f8k?

Yes definately, f8J is a trash, F8H is better but CNQ always on, gonna revert later.

Check AMD section for some stuff I just released.

going there

[Johnny87au]

anyone try these sticks on a ud7 or ud9 perhaps running @ 1700? i wanna see how tight these can go, im guessing 6/6/6/17?

[crazydiamond]

yes 1700 6.6.6 should be no problem on any board

[Barr3l Rid3r]

anyone try these sticks on a ud7 or ud9 perhaps running @ 1700? i wanna see how tight these can go, im guessing 6/6/6/17?

I dont get it, what Dominators do you have? u told that 1760Mhz 6-6-6-17 was fine than. Wich board?

[websmile]

anyone try these sticks on a ud7 or ud9 perhaps running @ 1700? i wanna see how tight these can go, im guessing 6/6/6/17?

Since I don´t know an UD9 for AMD you might mean Intel- I had the 2200Cl8 on an UD5 with an i860, at 1,66V they are Memtest stable around 1750 6-6-6-16 1T with Auto subs, Performance on Turbo- need a small amount more V(about 0,02V) than my 2000 ProjectX