one quick question for dualbrain or anybody who used it before:
will the mdpc sata sleeve fit over the sata connector or do i have to remove the connector off the sata cable in order to put the sleeve on?
one quick question for dualbrain or anybody who used it before:
will the mdpc sata sleeve fit over the sata connector or do i have to remove the connector off the sata cable in order to put the sleeve on?
Processor: Intel Core i7 990X
Motherboard: ASUS Rampage III Extreme
Memory: Corsair CMT6GX3M3A2000C8
Video Card: MSI N680GTX Lightning
Power Supply: Seasonic S12 650W
Case: Chieftec BH-01B-B-B
MDPC-X SATA sleeve fits over the connector when the sleeve is "expanded" (when you order, Nils will provide a detailed guide). Absolutely no need to remove the connector
Regards,
Martin Simpson
finally..
System: a little entertainment...™
Test
nym:
Kenjiwing!
Sorry for the watermarks, but it has come to my attention that certain people are taking my photos, reuploading them, and claiming them as their own...
If anyone has an alternative solution please let me know
Regards,
Martin Simpson
Today i was wondering, has anyone sleeved an ethernet or phone cable?
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
I have a quick question, what is the best way to get a nice, even shrink? With a heatgun? Or the misses hair dryer?
[Asus Evo][1055t Zalman CNPS10X][A-Data 4Gig][GTX480][Corsair AX850][Home made test bench][Ben-Q V2400W]
My Project:
We cease loving ourself is no one loves us...
You would sleeve an Ethernet cord! Very nice though, and thanks for the info. If greatly appreciated!
Saw a video where a guy used a lighter and it seemed to work very fast aswell, is great for me.
Keep up the excellent work!
[Asus Evo][1055t Zalman CNPS10X][A-Data 4Gig][GTX480][Corsair AX850][Home made test bench][Ben-Q V2400W]
My Project:
We cease loving ourself is no one loves us...
you guys will be the reason i get broke . can't stand just watching i got spending itch right now :P real pro work.
PPCS cable sleeving problem- Wrong size and they say its right!
Please see my thread! Dont buy that stuff.
Will be placing an order for MDPCX cable wrap soon as plan to replace every wire on my Ultra X4 P/S when i get time to.
Last edited by eclypse; 09-27-2010 at 08:18 AM.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
True, very true.. Looking back now i should of.. but as usuall i was in a hurry with the new upgrade and wanted to get it runing right away and only needed some wrap for the fans atm. Planed to get the system up and runing and then figure out what i needed afterwads as i plan to replace every wire on the P/S and make my own custom length wires to what i needed.
Still plan to do that just gota wait a couple of weeks fo rthe wife to calm down after blowing so much so far. hehe.
Yeah, i'll be getting a very LARGE order with everything and tools as well when i do place that order! Cant wait for that.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Just placed an order from MDPC-X sleeve kit + tools + Red small sleeve/sata sleeve + Red small Heatshrik can't wait !!!
Ok I saw sleeved cables here but wondering how to sleeve these:
silverstone strider modular cables
to look like:
those capacitors are making the cables look ugly...
Last edited by Mostafa Hijazi; 09-28-2010 at 04:49 AM.
My Current System:
Asus Rampage III Extreme
Intel Corei7 950 D0 @ 4.0 / 1.375V
Thermalright Venomous-X Black - 2x NB PL-2
Corsair Dominator GT 6GB 8-8-8-24 1600MHZ @ 1.65V
Evga 480 GTX Sli super clocked
Cooler Master HAF-X
I removed the capacitors on my cables... They weren't needed. Maybe back in the day, but video cards are built a hell of a lot better.
They may/maynot be needed. They are there to reduce signal noise (whine) from your PSU when plugged into your video card.
Some of my current systems have this whine--my guess is that most people do not notice it over their fans, but in my media center PC with a Corsair 620HX and a low profile 9800GT it is bad. I used to think it was the BDROM but after unplugging it I realized what it was.
After listening for it in my other PCs I noticed quite a few have it--but the sound of hard drives, fans (even low RPM ones) combined with the use of headphones covers it up.
Either way, they are not critical to your operation--only if you are a silent junky like myself. =)
I want to experiment by moving them closer to the PSU to make them work, or figure out a nice way of including them in the sleeve.
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
Moving them closer to the PSU essentially negates their effectiveness. Either leave them where they are or remove them completely and live with the consequences.
Oh, my god. I hate that signal whine aswell NFC.
[Asus Evo][1055t Zalman CNPS10X][A-Data 4Gig][GTX480][Corsair AX850][Home made test bench][Ben-Q V2400W]
My Project:
We cease loving ourself is no one loves us...
Martin, you are one of the best there is at sleeving, and I doubt the other three people would take credit for your work. =)
Personally, I think it detracts from your work as art. I understand you have a business and can emphasize with the frustration plagiarist cause, but eventually they will be found out.
At the very least I would ask you to consider moving the mark to the side, so that if a plagiarist crops it out they crop out the detail of the sleeve.
Anyways, I think your work is incredible art, and it should be treated and respected as such. Feel free to call out the thieves too, that never hurts
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
My Current System:
Asus Rampage III Extreme
Intel Corei7 950 D0 @ 4.0 / 1.375V
Thermalright Venomous-X Black - 2x NB PL-2
Corsair Dominator GT 6GB 8-8-8-24 1600MHZ @ 1.65V
Evga 480 GTX Sli super clocked
Cooler Master HAF-X
My Current System:
Asus Rampage III Extreme
Intel Corei7 950 D0 @ 4.0 / 1.375V
Thermalright Venomous-X Black - 2x NB PL-2
Corsair Dominator GT 6GB 8-8-8-24 1600MHZ @ 1.65V
Evga 480 GTX Sli super clocked
Cooler Master HAF-X
hi.................
CORE i7 950 D0@4.2/WC EK BLOCKS-XSPC-SWIFTECH-BLACK ICE® SR1 360 RADIATOR/RAMPAGE III EXTREME X58/CORSAIR DOMINATOR DDR3 1600MHz 3 x 2GB TR3X6G1600C7D G/EVGA GTX 580/SSD OCZ VERTEX II/2 X SEAGATE 500 GB 32MB/2 X SEAGATE 1 T 32MB/G19/MX-PERFORMANCE/RAZER VESPULA/Z 5500/ENERMAX EVO 1250W/CM COSMOS S POLISH MOD/MEDIA LAB TT/SAMSUNG 2470HN/DVD-RAM ASUS/WIN7 64 ULTIMATE/MONSTER HTS 2100
Bookmarks