i need a guide how to make a memmory volt mod on a 9800se connect3d card i have made a GPU volt mod now its time for mem mod
i have made the mod so that the card is now running at 1x8 pipelines and got 19600 in 3dmark 01 :P
here is the link
but why cant i get eny further then 360mhz on the memmory ??
i have ram sinks on and great cooling ?
here is a pic...
Last edited by WiruZDK; 09-13-2003 at 12:44 PM.
it would be great if someone knew where i could find an easy guide for me
| 3.2EE @ 4.3 @ 1:1
|Asus p4c800-e @ *Vdimm mod* *Vcore drop mod *
| 2x512 muskin specieal *2225 @ 245fsb @ 3.3v*
| X800pro connect3d FFS forsinket !
| CPU colled By *Mach 2 ST*
| super tornado 400W @ *3.3v mod 3.8v*
If it doesn’t fit use violence – if it breaks it needed replace enyway
Hmm, dunno about the SE it's only 128bit bus. You could take a look at the Macci one and see if the pcb's are the same.
I wonder if a 9500Pro might be the correct pcb for you? So maybe look for one of those.
And I don't think I would classify that as great cooling either. There really dosn't exist a good factory made GPU cooler.....that I have seen at least.
Nice card huh? She took the softmod
G H Z
no its not 128bit its 256 bit i can see it in RivaTuner
| 3.2EE @ 4.3 @ 1:1
|Asus p4c800-e @ *Vdimm mod* *Vcore drop mod *
| 2x512 muskin specieal *2225 @ 245fsb @ 3.3v*
| X800pro connect3d FFS forsinket !
| CPU colled By *Mach 2 ST*
| super tornado 400W @ *3.3v mod 3.8v*
If it doesn’t fit use violence – if it breaks it needed replace enyway
isent there enyone that knows how to do this...
| 3.2EE @ 4.3 @ 1:1
|Asus p4c800-e @ *Vdimm mod* *Vcore drop mod *
| 2x512 muskin specieal *2225 @ 245fsb @ 3.3v*
| X800pro connect3d FFS forsinket !
| CPU colled By *Mach 2 ST*
| super tornado 400W @ *3.3v mod 3.8v*
If it doesn’t fit use violence – if it breaks it needed replace enyway
That version 9800SE is built on the 9700pro PCboard... so all the 9700pro vmds shold apply.
Hi, I have a 9800 SE, also softmoded to 9800 PRO. I'm about to do the Vgpu, can u post how u did it on your card? Also i need to know where do u measure the Gpu Voltage.
Regards,
diogojcr
sorry to dig up an old thread but I think the 128bit is the same as the 9500pro for gpu and mem volt mods
as for the 256bit version. it is on the exact same layout as a 9700np/pro so volt mods should be identical.
yay, first post
Posting Permissions
Reply With Quote
Bookmarks