Angelreaper can you make me a favour and try to run linx with problem size set at 25000? I want to check if it makes any difference at the vcore required to be stable. Nice job and great cpu you have there![]()
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
![]()
hi
final got to test with linx
Coolermaster 700D
Water cooled CPU & graphic card
Thermocill 320 & 240 Rad , DDC ultra pump
I5 2500K L046B582 @4.8
asrock Z77 Extreme 6
4 gig Ripsaw 1600
Corsair C300 128 SSD Boot Drive
Samsung F3 1TG
5870 W/C @ 1000 & 1250
Nice low voltage submissions, guys! Keep up the good work!![]()
here's mine
4.6 06no ht
4.5 23with ht
megahalems push pull
i be back![]()
Last edited by zsamz_; 03-08-2010 at 01:48 AM.
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Nice! Whats your batch #?
Sorry but 11500 problem size is very low to stress cpu. Try again with at least 25000 and post back.
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
![]()
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
From what I heard you claimed it to be 4,6ghz HT ON stable?
That's first point. Second point is, without using at least 4096MB of used ram don't even try, otherwise it's too easy. 7 minutes of testing is nothing, but.
Try one hour, it will crashDon't blame us, you were the one claiming 4,6Ghz ht on stable on air.
I hope he does come back I want to see his desktop again!
@ johnksss: very nice!
What cooling did you use?
yes, water cooled.
water chiller, i think...i cant remember. and like a dummy, i forgot to put a side note.
ok, i found it..yeah it was a small water chiller and water was at 60F
Last edited by johnksss; 03-08-2010 at 02:46 PM.
i never claimes i was stable 4.6 ht onlearn to read
cpu can prime like its nothin so go find yourself an i7 that will do 4.5 with ht on and try for yourself
maybe 1 day you will
dont hate cause your i7 suks
Zalbard i be ready next time when i get more free time to duct the a/c to the intake fan![]()
Last edited by zsamz_; 03-08-2010 at 02:51 PM.
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Learn to not brag on the forums before you actually did something.
I never tried to have 4,5HT ON, and like I said before: 4,6 HT ON ON AIR is almost impossible. And you were the one claiming you've got that cpu capable of doing it. You failed m8, since I can't see 4600mhz ht on in the pictures.
Actually you don't want me to upload screenshots of an i7 doing 4,8GHz HT ON linx stable that my friend was running on SS. So better don't say "maybe 1 day you will". Instead of that upload your 4,6ghz ht on mr. fail.
before you have another brainfart
i never stated i used ht
that was first time i even completed passes linx on ht
so dont start puttin words in my mouth and drop the crackpipe
and if i wanted to do 4.6 with ht i can all i need is proper coolin cause i know the cpu can do it
maybe i should ask god to gimme his linx pass @ 6.0![]()
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Guys, please, take it to PMs.
Thank you.![]()
I am sure i can get my i5 750 to pass linx 20 pass with 12gb of memory at 5ghz with ht on, it might just need alot of ln3
Originally Posted by DDtung
Done about 10 days ago quickly...
CPU: Core i7 920 D0, #3849A832, 4650.5MHz (222MHz x 21, 221.5MHz actual), With Vdroop, 1.611V idle, 1.541V load, HyperThreading On, 3987MHz Uncore, 42C idle, 89C load
DRAM: Mushkin Ascent Redline 6GB 6-7-6-18-59-1T 1600MHz kit at 1772MHz, 7-8-7-18-59-1T, DRAM Ratio sub-timings, 1.67V
MOBO: EVGA X58 Classified E759 with EK FC block
GPU: MSI R5850 OC at 1.225V/1000MHz/1250MHz
COOLING: Water with a single HW Labs BI GTX360 cooling CPU, motherboard, and GPU(s), 23C ambient
![]()
My HeatWare: http://www.heatware.com/eval.php?id=70151
Bookmarks