** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[BuGjAE]

I try to lower the CPU VTT so keep the ratio between CPU VTT and MCH REFERENCE ( CPU VTT 1.28 MCH REF 0.75 ) and pulldown a bit so BIOS will automatic keep ratio to proper voltage and I think it's finally stable for E8600
with acceptable load Temp 533x8 Setting with 1:1 ram
Load line..................................... enabled
CPU Vcore….……….........................: 1.32500
CPU Termination…..... 1.200V*.......: 1.24
CPU PLL…………………....1.500V*.......: 1.59
CPU Reference………....0.76V*.......: AUTO
MCH/ICH
MCH Core…………….....1.100V...........: 1.30
MCH Reference….…….0.760V...........: 0.738<---- not sure but keep Ratio around this
MCH/DRAM Ref.…......0.900V...........: normal
ICH I/O……………….....1.550V............: normal
ICH Core…………...……1.100V............: normal
DRAM
DRAM Voltage ……....1.800V............: 1.80
DRAM Termination .…0.900V............: normal
Channel A Reference 0.900V............: normal
Channel B Reference 0.900V............: normal
__________________