RIG:
-ASUS Maximus Formula I+Full EK WB/Q6600 G0@9x450+EK Supreme/4x2go G.Skill PI PC 6400/CF HD4850+XSPC Razor/WD Velociraptor 150Go/Samsung F1 1To.
-CPU Loop: Laing D5/EK Top rev.2/TFC X-Changer 240+2xEnermax Magma/TFC X-Changer 360+6xSilentX
-MOBO Loop: Laing 18W/Feser X-Changer 360+3xUltra Kaze 2000
wanna watercool the NB but dont wanna rip off that sexy heatpipe contraption that this asus board has ?? well you could do this !!![]()
i installed my swiftect NB block straight to the heatpipes like so.. you need to swich the mounting finns on the block the otherway arround !!! if you dont do it the block wont alling with the holes on the heatpipe cooler
i used the block screws that come with it the other way arround like you can see from the pic.. then just tightened until the springs went no further.
READY TO ROCK![]()
![]()
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
->Solarfall: I needed to cut a little the WB because contact between WB/NB is not enoughtThat's allow me to "screw it well"(sorry, don't really know how to tell this).
BTW, it seems that Swiftech is about to produce a sexy MF2 WB for NB:
http://img355.imageshack.us/img355/1...m2fx450qf7.gif
Your CPU isn't WCed???
RIG:
-ASUS Maximus Formula I+Full EK WB/Q6600 G0@9x450+EK Supreme/4x2go G.Skill PI PC 6400/CF HD4850+XSPC Razor/WD Velociraptor 150Go/Samsung F1 1To.
-CPU Loop: Laing D5/EK Top rev.2/TFC X-Changer 240+2xEnermax Magma/TFC X-Changer 360+6xSilentX
-MOBO Loop: Laing 18W/Feser X-Changer 360+3xUltra Kaze 2000
mr-rob you dont have to cut anything if your using the same block as i am.. you will just have to swich the metal mounting finns (the shiny ones) other way arround.. the swiftech mwc-30 will fit then !! you'll just have to swich the mounting finns easy as that
nope i usually dont watercool my cpu.. cos i basically use this board just to do benching![]()
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
RIG:
-ASUS Maximus Formula I+Full EK WB/Q6600 G0@9x450+EK Supreme/4x2go G.Skill PI PC 6400/CF HD4850+XSPC Razor/WD Velociraptor 150Go/Samsung F1 1To.
-CPU Loop: Laing D5/EK Top rev.2/TFC X-Changer 240+2xEnermax Magma/TFC X-Changer 360+6xSilentX
-MOBO Loop: Laing 18W/Feser X-Changer 360+3xUltra Kaze 2000
before you think that big OC is stable, run IntelBurnTest on Max memory usage.
it might scare theoutta ya.
So i'm leaning towards the Asus P5Q Deluxe because of the cooling for the Mosfets/NB/SB.
How's the motherboard chipset cooling for the Maximus? And is there really any big difference between the Deluxe and Max other than sound card?
Main Rig:
Asus P5Q Deluxe - Antec Truepower Quattro 850w Vista x64 SP1
Xigmatek 1283/Yate Loon
Q6600 G0 L804A768 @ 3.3ghz 1.425v
New Q6600 G0 L72b (testing with new Asus)
Visiontek 4850 512MB 700/1100
WD Raptor 74Gbx2 Raid+0/Seagate 320GB/Seagate 750GB
My board just arrived
Are the chipset drivers on the CD upto date?
my buddy, Lian Li A70:
* Asus P6T Deluxe & Intel Core i7 920 @ 4.2 + HT, stable @ 1.3875v & 6GB OCZ PC3-12800 Triple Channel Low Voltage & 1X Hitachi Deskstar 1TB
* DELL 30"WFP3007-HC & 2x 4850 CrossFire & X-Fi Fatal1ty Pro & Sennheiser HD595
* SilverStone Zeus 750W
my liquid setup:
*cpu EK Supreme Acrylic *rad TFC Xchanger 480QUAD *pump DDC-2 + XPSC reservoir top
*tubing Tygon B-44-4X 1/2"ID - 3/4"OD + all Feser compression fittings
MY LIAN-LI A70-480QUAD WORKLOG - KAOZZ.COM
Damn, the 0901 Bios is giving me lots of problems. Crash codes in OCCT and Errors in Orthos. Im going to try the 0802 Bios....
Intel i7 950 D0 @ 4Ghz 23x175
-Cooled by: Prolimatech Megashadow
EVGA Classified E760
G.Skill Perfect Storm DDR3-2133 3x2GB @ 1745 8-8-8-20
MSI 5850 Twin Frozr 1GB DDR5
1 300GB WD Velociraptor WD3000HLFS
1 1TB Western Digital WD1002FAEX
2 2TB WD WD20EARS
Corsair HX850W
Coolermaster HAF 932
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
It seems to come out in about 3 weeks.
Yeah, it's really sexy
.
I'll see if I'll change my MCW-30 by this one later
I don't know for the drivers. I used to DL directly from ASUS & BTW I never used CDs provided with the boards.
For now, my favourite bios is still the 604.
RIG:
-ASUS Maximus Formula I+Full EK WB/Q6600 G0@9x450+EK Supreme/4x2go G.Skill PI PC 6400/CF HD4850+XSPC Razor/WD Velociraptor 150Go/Samsung F1 1To.
-CPU Loop: Laing D5/EK Top rev.2/TFC X-Changer 240+2xEnermax Magma/TFC X-Changer 360+6xSilentX
-MOBO Loop: Laing 18W/Feser X-Changer 360+3xUltra Kaze 2000
Thanks guys for the info.
I'll try 604 first and move up from there.
Someone has the measures, of bridge NB???To do a domestic block, for my.
Regards
I have noticed that the 0901 bios has been removed and replaced several times on the Asus website. as of now it is posted - anyone know what is up with that?
i7 920 DO 3850A849 @4410 under custom water.
Asus P6T deluxe V2
3X2gb Mushkin DDR3 1600 998691
Sapphire 4870 1g
Corsair Hx 850 psu
2 G.Skill titan 128gb SSDs in RAID0 Data
Intel X25-M OS drive
Windows 7 Home Premium 64
Guys, please help me! I`ve bought M2F today. Before that i had MF.
My rig is in signature.
I reached very good result with MF. But i can`t reach the same with M2F (maybe coz of different bios which i need to learn?)
Can someone write bios config,please?
Last edited by WaterFlex; 08-22-2008 at 12:26 PM.
Intel Q9650 @500x9MHz/1,3V
Asus Maximus II Formula @Performance Level=7
OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
OCZ SSD Vertex 3 120Gb
Seagate RAID0 2x ST1000DM003
XFX HD7970 3GB @1111MHz
Thermaltake Xaser VI BWS
Seasonic Platinum SS-1000XP
M-Audio Audiophile 192
LG W2486L
Liquid Cooling System :
ThermoChill PA120.3 + Coolgate 4x120
Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''
Apple MacBook Pro 17` Early 2011:
CPU: Sandy Bridge Intel Core i7 2720QM
RAM: Crucial 2x4GB DDR3 1333
SSD: Samsung 840 Pro 256 GB SSD
HDD: ADATA Nobility NH13 1GB White
OS: Mac OS X Mavericks
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
hey everyone i just got the maximus 2 formula and love it. im having one problem though. im trying to install a 64 bit os and it doesnt work. all my 32 bit os's work. is there something i have to change in the bios? thanks
It doesn't work is really vague. What problems are you encountering?
| Asus Maximus IV Extreme | i7 2600K w/ Noctua NH-D14 | ASUS ENGTX580 DirectCU II |
| 2x4GB G.Skill DDR3-1600 | Corsair F60 60GB - Raid 0 | WD2001FASS | Silverstone FT-02 w/ Corsair 1200w PSU|
lol sorry. well i make it boot from the cd drive and whenever i put in a 64 bit os it says "reboot and select boot device or put in boot media and press a key"
does 64 bit work for you? did you have to chagne any settings.
Bookmarks