Lian Li v2000 and v1200 thread

[k0la]

I just can't decide between the V2000 and the TJ07.

I like the looks of the V2000 a little more and it offers inverted ATX by default, but I don't know if the airflow at the bottom section is enough for two tripple rads without cutting the panels.

[disruptfam]

I have two triple rads in the bottom of my v2000,but you will need to cut the panels for good airflow...That's what i'm doing atm....

If your after a case that doesn't need any modding i would go for the tj07..But if you don't mind a lil work...I would go with v2000

the v2000 is alot more spacious and looks better in my opinion

cheers

[Bl4ck^!]

the v2000 is alot more spacious and looks better in my opinion

not to mention V2000 is cheaper ;] (not much but still)

Anyway i have a question , the V1000B Plus is supposed to have a removable motherboard tray , but i can't figure out how to get it out , the attached to the case brochure doesn't show anything useful about that

oh and another thing, if i remove the two hard drive cages how can i mount my 2 hard drives in the 5.25 bays ? (because i don't see any way besides of doing a hammock out of rubber bands ) I'm asking because i want to put down there a 120.2 Rad only for the Cpu and perhaps the north bridge.

[k0la]

I think I will mail the panels to my dad, he's been working with metal for ages and can do wonders. I myself would probably just ruin them.

[lazy]

not to mention V2000 is cheaper ;] (not much but still)

Anyway i have a question , the V1000B Plus is supposed to have a removable motherboard tray , but i can't figure out how to get it out , the attached to the case brochure doesn't show anything useful about that

oh and another thing, if i remove the two hard drive cages how can i mount my 2 hard drives in the 5.25 bays ? (because i don't see any way besides of doing a hammock out of rubber bands ) I'm asking because i want to put down there a 120.2 Rad only for the Cpu and perhaps the north bridge.

Theres room for a 240rad in the lower part of a v1000? space is so limited..
normally you will need to purchase the 5.25 hd cage to put the hdd there

[Bl4ck^!]

Theres room for a 240rad in the lower part of a v1000? space is so limited..
normally you will need to purchase the 5.25 hd cage to put the hdd there

it will fit a rad with 2x120mm fan ;] i checked the dimensions , and for the hdd cages i removed them, and one of them i used with the fdd-adapter to mount the hard drives in 5.25" bay , it works good :]

[k0la]

I think I will mail the panels to my dad, he's been working with metal for ages and can do wonders. I myself would probably just ruin them.

Even better, my dad knows someone who can laser cut them.

[disruptfam]

Even better, my dad knows someone who can laser cut them.

I ENVY YOU!!!!

there's no laser cutting place's in Aus that do small job's like side panel's
my only option was sending mine oversea's which would cost 2 much!!!

[lazy]

can your dad laser cut mine too? =p

[k0la]

can your dad laser cut mine too? =p

I live in Finland so that might become a problem

[Feichti]

on the weekend i got finaly aboaut 95% ready

Comments:
Hardware Case 1: 2x Mainboard, 2x Cpus, 2x GPU's @ Crossfire 1x Dual TC Radi, 1x AGB ,1x Aquaero

Watercooling Case 2: 2 Laing Pumpen 3 AGB's, 1x TC Trippel und 1x TC Dual, 1x Aquaero, 2x Poweradjust.

For More infos of the Hardware please visit my homepage

www.hardware.feichti.com























Feichti

[RockfordFosgate]

Vaoww external dual V2000

[Jedda]

Looks a bit like my V-twin dual V1000 combo but not the light show. I couldn't live with that.
Nice work though.

[k0la]

It looks like Lian Li is about to launch side panels similar to those on the TJ07, so I may not have to laser cut mine at all.

http://forums.hexus.net/showthread.php?t=120796

[disruptfam]

OMFG THAT'S SIK Feichti

WoW i'm in Awe

Fantastic work mate

I'm a lil confused on how it's set out lol....

a lil more work on the cable management is only negative thing i could say....

[disruptfam]

It looks like Lian Li is about to launch side panels similar to those on the TJ07, so I may not have to laser cut mine at all.

s@#%$%@%# dammit just when i started to cut into mine aswell!!!!

oh well............

[Feichti]

Vaoww external dual V2000

the Lian Li have got a very smooth look so like them very much

Looks a bit like my V-twin dual V1000 combo but not the light show. I couldn't live with that.
Nice work though.

For the light i will install in the front switchs to turn the lights on/off

OMFG THAT'S SIK Feichti

WoW i'm in Awe

Fantastic work mate

I'm a lil confused on how it's set out lol....

a lil more work on the cable management is only negative thing i could say....

yes your right i will doe some cable managment in a few weeks when i have got my new switchs for the lights

Feichti

[monitorkeeper]

how can i post pics. ive tryed copying from photobucket but it wont past

[[XC]Atomicpineapple]

My latest attempt. Specs as in sig. Loop 1 goes EK Res>Laing DDC+>CPU1>CPU2>MCW-60>PA120.3>Res. Loop 2 is Swiftech Res>MCW-30>BIP>Maze 4 (on PhysX)>Res.











Sorry for poor pics, only so much I can do with a phone camera!

[[XC]Atomicpineapple]

Nope, its exhausting air from the case. Tried it the other way round and case temp rockets, not surprising as its cooling 2 OCed quad cores and an 8800GTS.

[JamMasterJay]

Nice cases you guys have here!

Anyone here using an Asus Blitz/Formula in his V1000/V2000? If yes, du you have any problems with these boards in this case due to the heatpipes and the upside-down mounting?

[Jedda]

how can i post pics. ive tryed copying from photobucket but it wont past

You need to either copy the IMG code from photobucket and paste it in your post or copy the url and use the little postcard icon above the post text box.
You want to keep the size down too.

[monitorkeeper]

[IMG][IMG][/IMG][/IMG]

[MikeMK]

Hey, monitorkeeper, great job there mate. What rads have u got sat in there. Are they at GTX480 & 240? Just wondering, cos I want to fit a thermochill PA120.3 & a PA120.2 in exactly that arrangement, and I have a galaxy PSU too, I was just concerned about the heighet of the bottom compartment.

[monitorkeeper]

one 120m single one twin 120m and the new quad 120m from vadim