MMM
Results 1 to 25 of 1275

Thread: 32m Low Clock Challenge

Hybrid View

  1. #1
    Registered User
    Join Date
    Oct 2006
    Posts
    96
    11,xx
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	11min59sec969msec3951mhzf1.jpg 
Views:	374 
Size:	172.3 KB 
ID:	60934  

  2. #2
    Registered User
    Join Date
    Oct 2006
    Posts
    96
    14,xx
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	14min59sec703msec3045mhtz3.jpg 
Views:	333 
Size:	179.3 KB 
ID:	60935  

  3. #3
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by Oldscarface View Post
    14,xx
    nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 bios

    if you could provide the settings used with this template would appreciate it alot

    Bios Template:
    Extreme Tweaker:
    AI Tuning: Manual
    CPU Frequency:
    DRAM Frequency: DDR2-533MHz (1:1 Divider), DDR2-667MHz (4:5 Divider), DDR2-800MHz (2:3 Divider), DDR2-889MHz (3:5 Divider), DDR2-1066MHz (1:2 Divider)
    PCI Express Frequency: 100
    PCI Clock Synchronisation: 33.33
    Spread Spectrum: Disabled
    CPU Vcore Voltage: Auto
    FSB Termination Voltage: Auto
    NB Vcore: Auto
    Memory Voltage: 2.00v
    DDRII Channel A REF Voltage: Auto
    DDRII Channel B REF Voltage: Auto
    DDRII Controller REF Voltage: Auto
    SB Vcore (SATA, PCIE): Auto
    SB Chipset Voltage: Auto

    Asus C.G.I.: Disabled
    Static Read Control: Disabled
    Configure DRAM Timing by SPD: Disabled
    - DRAM CAS# Latency: 4
    - DRAM RAS# to CAS# Delay: 4
    - DRAM RAS# Precharge: 4
    - DRAM RAS# Activate to Precharge: 12
    - DRAM Write Recovery Time: 6
    - DRAM TRFC: 42
    - DRAM TRRD: 10
    - Rank Write to Read Delay: 10
    - Read to Precharge Delay: 10
    - Write to Precharge Delay: 10

    Legacy USB Support: Disabled

    CPU Configuration
    Modify Ratio Support: Enabled
    - Ratio CMOS Setting: 11x
    C1E Support: Disabled
    Max CPUID Value Limit: Disabled
    Vanderpool Technology: Disabled
    CPU TM function: Disabled
    Execute Disable Bit: Disabled
    PECI: Enabled
    thanks
    ---

  4. #4
    Registered User
    Join Date
    Oct 2006
    Posts
    96
    Quote Originally Posted by eva2000 View Post
    nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 bios

    if you could provide the settings used with this template would appreciate it alot

    Bios Template:
    thanks
    eva2000 :
    First off all I'am still using bios 0803 :
    Which memdivider do you use?
    And what is your mem voltage?
    Memdivider 2/3 is absoluut the best for this board.
    Memdivider 4/5 does not work propperly, but most P965 board have that problem.
    But here are my settings from the bios, I hope it will help you.

    Extreme Tweaker:
    AI Tuning: Manual
    CPU Frequency: boot with FSB 400Mhz, in windows with SetFSB to 420Mhz and apply, then to 439Mhz and apply.
    DRAM Frequency: DDR2-800MHz (2:3 Divider) = 1200Mhz @ boot and 1317 @ FSB 439Mhz
    PCI Express Frequency: 100
    PCI Clock Synchronisation: 33.33
    Spread Spectrum: Disabled
    CPU Vcore Voltage: 1,5875V
    FSB Termination Voltage: Auto
    NB Vcore: Auto
    Memory Voltage: 2.625V (2,600V also works)
    DDRII Channel A REF Voltage: Auto
    DDRII Channel B REF Voltage: Auto
    DDRII Controller REF Voltage: Auto
    SB Vcore (SATA, PCIE): Auto
    SB Chipset Voltage: Auto

    Asus C.G.I.: Disabled
    Static Read Control: Disabled
    Configure DRAM Timing by SPD: Disabled
    - DRAM CAS# Latency: 5
    - DRAM RAS# to CAS# Delay: 5 => In windows with Memset I change the Write Delay to 4.
    - DRAM RAS# Precharge: 5 => In windows with Memset I change it till 4
    - DRAM RAS# Activate to Precharge: 5
    - DRAM Write Recovery Time: 5
    - DRAM TRFC: 35 => In windows with Memset I change 25
    - DRAM TRRD: 3
    - Rank Write to Read Delay: 10
    - Read to Precharge Delay: 5
    - Write to Precharge Delay: 10

    Legacy USB Support: Disabled

    CPU Configuration
    Modify Ratio Support: Enabled
    - Ratio CMOS Setting: 9x
    C1E Support: Disabled
    Max CPUID Value Limit: Disabled
    Vanderpool Technology: Disabled
    CPU TM function: Disabled
    Execute Disable Bit: Disabled
    PECI: Disabled

  5. #5
    Xtremely Addicted
    Join Date
    Dec 2004
    Location
    NL
    Posts
    2,471
    Best 32M bencher we have here in our little country, klasse

  6. #6
    Registered User
    Join Date
    Oct 2006
    Posts
    96
    Quote Originally Posted by loc.o View Post
    Best 32M bencher we have here in our little country, klasse
    Thanks (bedankt) loc.o

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •