E6320 E6420 oc results

**dontloveme** · 04-23-2007, 06:42 AM

havent seen many results here.every1 is too lazy to test them out?
tried a 6420 around 15th, cant even push it over 2.8ghz on stock voltage,max tried 3.4ghz stable on commando with 1.65Vcore

tested with ninja plus.

another 6320 tried tonight 2.8ghz stock voltage ok,3.2ghz stable at 1.5V with stock cooler until met fsb wall on 650i motherboards.might put it on ds3p or commando to test it again

**deadlock7** · 04-23-2007, 10:52 AM

Same here for my 6320.There is a wall with this cpu around 470 fsb on commando!I can pass 3220@1.45v(about 1.5 from bios) orthos,but nothing more.
That's not good news for conroe..

**eXceeded** · 04-23-2007, 11:17 AM

hmmm on par with my chip then :S... I need 1.55v (1.52 real) to get 3.2ghz which is 400x8. Motherboard won't even do 470Mhz.......

**naelq** · 04-23-2007, 11:34 AM

i have a E6320 setting on the desk! lol (got it for free, lololol!)
still looking for a MoBo for it.. but can't decide which!

anyway, which stepping do you have?

**Aldy402** · 04-23-2007, 11:48 AM

sad to read more disappointing results..

i guess ill stick to my e6300 till the quad cores drop again in q3 07'

**MADMAX22** · 04-23-2007, 12:16 PM

got my 6420 today stepping L644G465, gonna give it a go this weekend hopefully on some water with my quadgt and see what happens, ill keep ya all informed

**rvd** · 04-23-2007, 12:59 PM

3.6 on air

**Blacklash** · 04-23-2007, 01:33 PM

I should have an E6320 mid week for my second rig and will post results here and in the QuadGT thread.

**oshox** · 04-23-2007, 01:57 PM

I have an E6420 L647G476
@1.35v, I was stable at 3,264
@1.53, I am up to 3,648
Might be able to go higher if I tweak my MB a little more, but I don't seem to get that much more speed when I add more voltage.

**s e t h** · 04-23-2007, 02:05 PM

please post the steppings from your cpu's ppl...

**deadlock7** · 04-23-2007, 03:35 PM

E6320 L652B271 here.The worst conroe i've ever had.Can't get stable at 3.25 even with high volts.I'll change it soon..

**WannaGoFast** · 04-23-2007, 03:42 PM

E6420 L644G465 does 3.0GHz with 1.5v. 3.2GHz with 1.6v max orthos stable.
Ordered last week from Nerds.Net. Shipped from Memphis Tennessee.

**Kunaak** · 04-23-2007, 05:48 PM

seeing as how most boards wont hit 500 easy with a 4 meg cache, the 6420 seems like the best buy of the two, as 8 x 450 is pretty easy, and 450 isnt gonna be too hard for most boards.
so basically your best chance at a good OC is the 6420, if your on a budget.

**The Nemesis** · 04-23-2007, 06:57 PM

Seems to me the E6600 @ $230 or so is a better buy than the E6420. If you want higher memory bandwith just drop the multiplier to 8 and run 450FSB. I see no reason to invest in the new cpu's until they start clocking better.

**deadlock7** · 04-24-2007, 01:21 AM

Originally Posted by Kunaak

seeing as how most boards wont hit 500 easy with a 4 meg cache, the 6420 seems like the best buy of the two, as 8 x 450 is pretty easy, and 450 isnt gonna be too hard for most boards.
so basically your best chance at a good OC is the 6420, if your on a budget.

I'm sure it's not board's problem.Commando runs 550+.There is a wall as i said before around 470,even with 6x multi..

**Hazzan** · 04-24-2007, 02:23 AM

@rvd : what your FPO/BACTH ? Thanks

**deadlock7** · 04-24-2007, 08:14 AM

I changed the 6320 with a 6420 L646G519.Much better...

**s_p_kay** · 04-24-2007, 10:21 AM

Deadlock - that looks pretty good. Are you on air? What mobo are you using?

**hot_fifty** · 04-24-2007, 10:45 AM

Commando - I guess. He was using the E6320, as youy see in post #2

**deadlock7** · 04-24-2007, 02:02 PM

Yeap you're right.I'm on stock air without any mods on commando.Actually temp is high(69-70 with pcsuite and 76-77 with coretemp),so i'll have to play with some better cooling..
I can run 520+fsb with this cpu that i tried.The previous 6320 crashed at 470fsb no matter of multi.This is an answer to everyone that says "there is no fsb wall".

**GhostMaster** · 04-24-2007, 02:36 PM

im with a e6420 l711A at 3200 1.35v, and testing, i will test more and give my feedback.

Regards.

EDIT: Another e6420 from portugal.

A quick test of 30 minutes.

Aircooler by tuniq tower 120.

**dontloveme** · 04-24-2007, 06:58 PM

i have 3 batch of new 6420 and 6320
E6420 L644G441 are really bad,3ghz need about 1.5V 3.2ghz 1.6V
L649G591 havent tried this one yet
E6320 L648G536 3.2ghz stable at 1.45v as i said on 1st post.
might be a gold one but im waiting for my Coolermaster GeminII CPU Cooler
to try it on my commando =D

**dnottis** · 04-24-2007, 07:01 PM

Originally Posted by dontloveme

i have 3 batch of new 6420 and 6320
E6420 L644G441 are really bad,3ghz need about 1.5V 3.2ghz 1.6V
L649G591 havent tried this one yet
E6320 L648G536 3.2ghz stable at 1.45v as i said on 1st post.
might be a gold one but im waiting for my Coolermaster GeminII CPU Cooler
to try it on my commando =D

WTH, the first few I saw were looking good. Recently the OCs on the 6420s suck.

I have one coming Thurs from Newegg - will report back then.

**The Nemesis** · 04-24-2007, 08:10 PM

Originally Posted by dnottis

WTH, the first few I saw were looking good. Recently the OCs on the 6420s suck.

I have one coming Thurs from Newegg - will report back then.

Kinda reminds me of last August when we all saw the first results of Conroe's & thought we would be hitting 3.6-3.8ghz easily on air, only to discover that most of retail chips took insane voltages to reach 3.6ghz dual prime stable if they reached it all.