Got this board today. Any links to the vcore mod, if available?
Thank you
Got this board today. Any links to the vcore mod, if available?
Thank you
Everyone PM hipro
FB is pin4
hehehe i did that a while ago.Originally Posted by G H Z
he said they'd be released soon enough!
Hicookie, what resistor value should be used?
NO SHI(f)T...........NOT AGAIN for God's shake!.......DON'T UPLOAD something that you HAVEN'T EVEN tested......You have burned some people's AOpen mobos like this in the past PLUS mine that I've spent $450 and now it is sitting here burned......SO PLEASE NOT AGAIN......Originally Posted by hicookie
OK.......I'll upload the VCore mod in a few minutes (to picture it first).....I don't want to see any burned down mobos......
Last edited by hipro5; 10-12-2006 at 04:37 AM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
OK...........Here you go......
Locate this IC......
......AND this spot.....one side of the capacitor......
Solder on this side of the capacitor to GROUND an 100KOhms 25 turns trimmer and trimm it to it's MAX resistance (100KOhms)....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
woot woot!
any more mods that you've published hipro?
Thanks hipro, I will try this shortly
lol, sorry , masterOriginally Posted by hipro5
yup , i have not tested yet, sorry for this, i won't ever do that again, and 2th sorry for last time on aopen.
btw,i think everyone expect ur ultimated mods,things like u did last time on ic7max3, and ct479.lol
vdimm and vmch / chipset mods for AW9:
vdimm:
vmch: (to the right of the upper PCI-E 16x port)
Both mods will give approx. +0.1V when soldered in.
I have tried them both myself
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
Nice pics, thanks for the mods crotale
I can verify that the vcore mod is working.
Here is also a read out for the vmch, along with a vmch booster mod. (either ends of the thick wire)
The booster mod is engineered by Hipro, all credit goes to him!
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
Wohoo! Thanks for the great MODs! How much does the MCH Booster mod increase the voltage? Is the booster Mod just the thick wire and no other modification?
Seems very simple to do for me!
Offtopic: Does the mainboard undervolt the mch? Now I'm at 425 MHz FSB with 1,9V MCH. 430 MHz --> blackscreen --> increased voltage to 2V --> still blackscreen. Does the MCH mod helps here or should I wait for another BIOS?
I assume the smaller wire is going to something you have setup so you can read the vmch voltage w/o having to flip over the board. Am I correct?Originally Posted by crotale
First of all, make sure you have good cooling on the NB! Completely stock, I didn't really gain anything over 1.85vmch from BIOS (too much heat), which is around 1.75v at the northbridge. The booster mod removes that voltage drop. With the stock heatsink + AS5 + screws to get more pressure + good fan, it responded up to 1.90v real = ~470FSBOriginally Posted by Ultrazauberer
Yes, it's just for read out.Originally Posted by shimmishim
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
Vfsb mod
It's tested and safe, helps the max FSB.
True, I can verify that oneOriginally Posted by Micutzu
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
i'm unfamiliar with the vfsb voltage.Originally Posted by crotale
what is it usually and what is a safe range?
also, does adding the 50k VR increase the voltage like it does for the other mods you posted?
Ok, thank you for the tips. I have just the stock cooling on the mobo with one 120mm fan. But If you mean that my cooling isn't good enough I can put a watercooler on it today. Do I need watercooler on the SB and mosfets too or is a watercooler just on the NB enough?Originally Posted by crotale
I would leave the stock cooling on SB and mosfets, if I can destruct the heatpipe cooling. (sorry for my bad English).
Hope I can reach 445 MHz FSB on the mainboard without mods.
What does the Vfsb mod do? Which voltage would increased?
Originally Posted by shimmishim
In asus motherboards it goes up to 1.45 and works best around 1.4, i dont know how it is for abit.
Bookmarks