hard time overclocking

[bachus_anonym]

Turn down HTT muliplier to x3 or x4 (if your HTT is below ~280). It looks from the screenshots, you have it at x5 - FSB1450 and FSB1000 on AiBooster.

Also, I mentioned in my thread that board has a problem when rebooting, at least for me. It will die right after restart. Pressing RESET one more time will wake it up but when you allow it to boot to Windows, happens exaclty what is shown at your screens - system will be at stock 200x11, or 200x10 in my case. A workaround for now is to, after pressing that RESET, go to BIOS and just hit F10 (save and exit) without changing anything and boot to Windows then. BTW, when you go to BIOS at that moment, it's gonna show that your CPU is at FSB x default multi, regardless. Ignore that, just hit F10...

EDIT: OK, I just played around for 5 mins and noticed, that I don't actually have to hit that F10 in BIOS. All you need is to just enter and exit BIOS... Very odd Also, when mobo dies after that restart I was talking about, I measured vdimm with a multimeter. Guess what, it reverts to default 1.80v but vcore stays where it was. Very odd... Now, after I hit RESET button to wake mobo up, vdimm changes to what I had set before reboot, 2.1v and system gets up But I still need to enter BIOS and exit (just ESC is enough)...

Other that this little glitch, it's seems to be a very solid board...