Some P4G8X bandwidth lovin!!!

**Tony** · 01-25-2003, 07:27 PM

Needed some register tweaks but here you go..dual ddr400.

Unbuffered.

**pulverizer** · 01-25-2003, 08:03 PM

wow

**charlie** · 01-25-2003, 09:09 PM

How does 3dmk run?
Awesome!
C

**TPR- Darwin** · 01-25-2003, 09:52 PM

I think I just soiled my undergarments.......

**Charles Wirth** · 01-25-2003, 11:15 PM

Very nice

**kiko** · 01-26-2003, 03:30 AM

Originally posted by TPR- Darwin
I think I just soiled my undergarments.......

why?

you have already the best for bandwidth. You have already the vrimm mod and ... forget buffered memory benchmark.

W/ some PC1200 you will score the same w/ unbuffered benchmark. But w/ PC1200 stick PC1333 will be easy @2.57v.

Ciao

**Bartje** · 01-26-2003, 05:10 AM

Thats some insane mem benchmark result...

**taco** · 01-26-2003, 08:38 PM

thats what i call some luvin. is it stable?

**Tony** · 01-27-2003, 07:21 AM

Remember its using a Mobile P4which defaults to a 12multi so 200fsb is a dead easy overclock..and yes it is stable to the point it is boring!!!

**Tedinde** · 01-27-2003, 06:08 PM

Man let me drop my pants and and look at those pics again. Better than intenet :banana::banana::banana::banana:.

Sure wish my FKng board would ship i ordered 2 months ago. With the order still active.

**charlie** · 01-29-2003, 11:29 AM

I saw Ga-8INXP back in-stock at Newegg for about 10 minutes yesterday. I was ready to buy one but waited for my wife to leave the room (hehehehehe) and 5 minutes later....they were gone!!! Grrrrrr.
AND TEDINDE---- What do you think of your Vapo PE, what do you use for gpu cooling(edit**I see MCW 50-T...works well?) and do you think Prommy would have gotten you a stronger oC?
C

**Blue078** · 01-31-2003, 11:57 AM

Got my 8INXP at Fry's

Their on line store show to have em in stock also.
http://outpost.com/

**Blue078** · 01-31-2003, 12:02 PM

bigtoe
What kinda CPU performance you getting from that P4 mobile??

**Tony** · 01-31-2003, 03:07 PM

Same as a normal P4..its just the board will not clock past 200fsb...thing is its a lot faster than a p4 clocked to 2.4 with a 133 or 166fsb as the cache and the memory are running much faster.

**Zroc** · 01-31-2003, 05:11 PM

Originally posted by bigtoe
Same as a normal P4..its just the board will not clock past 200fsb...thing is its a lot faster than a p4 clocked to 2.4 with a 133 or 166fsb as the cache and the memory are running much faster.

Yep...you in essence have early springdale right there.
DC board at 200FSB, and a 2.4/800 chip. The only thing you're missing is Hyperthreading.

Damn...Sprindale and those new 800 FSB with Hyperthreading chips...going to be hella sweet

**Blue078** · 01-31-2003, 06:21 PM

Originally posted by bigtoe
Remember its using a Mobile P4which defaults to a 12multi so 200fsb is a dead easy overclock..and yes it is stable to the point it is boring!!!

OK you've thrown me for a loop here, on the P4 moble defaults to 12x??

This means it's a 1.2GHZ P4 moble

**Ragnarok** · 01-31-2003, 06:37 PM

nah, p4 mobile can change their multipliers when battery is low..

**Tony** · 01-31-2003, 07:10 PM

On an ATX board there is no way to get it into performance mode so we are stuck at 12 multi.

http://www.vrforums.com/showthread.php?s=&threadid=5763

**Blue078** · 01-31-2003, 07:55 PM

Originally posted by bigtoe
On an ATX board there is no way to get it into performance mode so we are stuck at 12 multi.

http://www.vrforums.com/showthread.php?s=&threadid=5763

Thanks thats a good thread.
I noticed in that thread you showed a pic of the 8INXP's f2 BIOS loaded into modbin6, showing thew max fsb to be 355??

Was that after you moded it?
The 8INXP I have shipped with the F3 BIOS and only goes upto 200 fsb??
Not that I have a proc that'll do 200fsb, but you never know what will turn up

**Tony** · 02-02-2003, 08:15 AM

no that is what the bios says,,unmodded!!...wait for the 800fsb NW"C" to arrive and im sure we will see a bios upgrade for over 200 then.

**Blue078** · 02-02-2003, 08:24 AM

bigtoe
Have you got your 8INXP in yet??

**Tony** · 02-02-2003, 09:48 AM

nope...but I may have found one...will see if its avaialable tomorrow and with luck i will have it on weds.

**Blue078** · 02-02-2003, 10:27 AM

I'm interested to see which you like best, the Asus or the Giga Byte.

Thus far I've had no issues with the 8INXP to 180fsb
Wish I had a CPU that would go higher.
But they are comeing in April

**isp** · 02-02-2003, 09:18 PM

Originally posted by Tedinde
Sure wish my FKng board would ship i ordered 2 months ago. With the order still active.

Sucks man... Where did you order it from?

**super_si** · 02-04-2003, 12:26 PM

if your in the uk ill cry

cant get hold the board

Si

Thread: Some P4G8X bandwidth lovin!!!

Thread Tools

Search Thread

Rate This Thread

Display

Some P4G8X bandwidth lovin!!!

Bookmarks

Bookmarks

Posting Permissions