anyone have any experience with the OCZ EL-DDR PC3500?
ocprices.com were doing a review on a roundup of ddr, and it was able to break 500mhz cas2 on fastest timings using 2.85V
im thinking about getting a pair of them and stuffing it into an epox 8rda+
i just read that they have ddr500 cas2's using 4ns chips coming out soon, i think i will wait for those
I ordered a stick and should have it by tomorrow or friday.
I'll post some results as soon as I have it. Will be nice to compare it with my Corsair 3500 stick.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-Xณ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
Originally Posted by Movieman
I've got Supermicro boards that lasted longer than one of my marriages!
Me tooOriginally posted by gokickrocks
anyone have any experience with the OCZ EL-DDR PC3500?
ocprices.com were doing a review on a roundup of ddr, and it was able to break 500mhz cas2 on fastest timings using 2.85V
im thinking about getting a pair of them and stuffing it into an epox 8rda+
:-O
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
To say the true, I don't belive this review..look at the timings, threre is jo chance that someone will hit such high speed 2\ those timings..especially beacuse all the IT7\IT7-2 (not IT7-2 v.2) users so far can't run their mem with aggresive timings@high speed.Originally posted by gokickrocks
ocprices.com were doing a review on a roundup of ddr, and it was able to break 500mhz cas2 on fastest timings using 2.85V
I saw quite a few review with people hitting 490 range , also I think opainter has gone father with his It7
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
The EL PC3500 OCZ is running so far so good on my machine.
but Ryan still owe me a dinner thou
NF7-S v2.0
Thermaltake Xaer 6000
Barton2500+ @ 2420 220Mhz x 11x
Thermaltake Volcano 11
ATI 9700 Pro AIW
SB Audigy Plat.
Inspire 5300 5.1
2x512MB Corsair XMS PC3500 2-2-2-6
HPT RocketRaid PCI card
2x40GB Maxtor ATA133 Stripe 0
2x45GB IBM ATA100 Stripe 0
Plextor 20X10X40-12 DVD-CDRW Combo Drive
Plextor 504A DVD+/RW
Team #13285 <a href=http://folding.stanford.edu/cgi-bin/userpage?name=ABIT_Marketing><font color=#ff0000>My Folding Stats</font></a>
<img src=http://www.abit-usa.com/images/folding.jpg>
Maybe if you would leave the office before midnight we could go
Last edited by ryanpgroovy; 12-11-2002 at 11:44 PM.
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
Guys.....I just DON'T believe that it can do DDR500 with Cas 2-2-2.....It's IMPOSIBLE.....I think S-Sandra 2003 DID it again!!!!.....TOO Many "bags" this prog.....Anyways....for those who are going to buy it....HAVE LUCK...!!!
Here's the screnie of the OCZ stuff.....with Cas 2-2-2.....
....and here is mine at the same frequency with Cas 2-2-3....If I could run it at Cas 2-2-2 , I would have had OVER 3900Mb/s Memory bandwidth.....This is a 512Mb Corsair XMS3200 C2 one....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
But not with such aggresive timings. it's impossible.Originally posted by ryanpgroovy
I saw quite a few review with people hitting 490 range , also I think opainter has gone father with his It7
Maybe I'll pick some up today and check it. I need something that can hit close to 500 on some nice timings. I know for one thing. Geil can't do it
If my answers frighten you, stop asking such scary questions...
- Hush V2
- Intel i7 4770K - XSPC Raystorm - Gigabyte G1.Sniper Z87 - Crucial Ballistix DDR3-1866 - 9-9-9-24
- Zoltac Geforce GTX 780Ti - EK-FC780GTX Ti
- SanDisk Ultra 480GB SSD - WD Black 1TB 64MB Cache
- Custom Water Cooled Fractal Designs Define R4 - Antec HCP-1000 Platinum
- EK Coolstream XTC 280 - Cougar CF-V14HB Vortex HDB - XSPC EX240 - Scythe GT AP-15
- Dazmode Storm DDC 3.25 - AquaComputer Aqualis DDC 150 Reservoir
good luck...
1.6a@2.4, Abit IT7, 512mb Twinmos pc3200 (50D), FIC R9700, ANTEC TP430W, Cheiftec FT, MX500, INSPIRE 6100 6.1, Fortissimo III
Why are you all so interested in the timings, over 220fsb the timings make little difference (on my amd at least), maybe a few mb/s on unbuffered scores but in the noise for standard test. And sandras crap we the overclocking community should find a better memory only benchmark.
]JR[
Originally posted by DoGMaN
Maybe I'll pick some up today and check it. I need something that can hit close to 500 on some nice timings. I know for one thing. Geil can't do it
'Nice' timings really dont ยงยงยงยง at fast ram speeds. Maybe they help your 3dmark scores out some. Please tell you use your computer for something more than 3dmark2001 right?
Running at the slowest ram timings is fine on a p4 unless you are running 1:1, and maybe 4:5, high fsb's + 3:4 = YOU DON'T NEED CAS 2-2-2-5!!!!!!!!!!!!!!!!!!!!!!!!!!!
Instead of dropping 200 bucks on some ram, why not drop 200 bucks on granite bay... that will do you more good.
The people of SI = Kyle and Steve's whipping boy
hipro5
I think it took much voltage and most people wont be able to hit it
, but Opainter hit higher I beleive at 2-2-7-3
Last edited by ryanpgroovy; 12-12-2002 at 10:11 PM.
OCZ employee and proud of it.
If you have actually personaly experienced a problem with a OCZ product that was not solved quickly by our wonderful support staff I would like to know. Feel free to PM
Thanks
I am overclocked!
"Posted on Mar 30, 2005 at 1:35 AM by StormGod
In soviet Russia memory overvolts you! "
Well maybe not for some things it doesn't , but my 8RDA+ mem scores drop a good bit when I relax them, Sandra FWIW.Originally posted by lefthandedgoat
'Nice' timings really dont ยงยงยงยง at fast ram speeds. Maybe they help your 3dmark scores out some. Please tell you use your computer for something more than 3dmark2001 right?
Running at the slowest ram timings is fine on a p4 unless you are running 1:1, and maybe 4:5, high fsb's + 3:4 = YOU DON'T NEED CAS 2-2-2-5!!!!!!!!!!!!!!!!!!!!!!!!!!!
Instead of dropping 200 bucks on some ram, why not drop 200 bucks on granite bay... that will do you more good.
BTW Those are still some sweet scores in Sandra, most I could get was 3641/3426 . and thats pretty good for an AMD system. Of course it wasn't heavy benchworthy at that speed.
XMS3500c2
Last edited by muzz; 12-12-2002 at 10:23 PM.
Zen2 Has brought AMD back!
Wrong again...!!!.....You can't EVEN reach this with an OCZ memory module NO MATTER WHAT....even with MORE voltage...!!!...Can you???...Originally posted by ryanpgroovy
hipro5
I think it took much voltage and most people wont be able to hit it
, but Opainter hit higher I beleive at 2-2-7-3
Last edited by hipro5; 12-13-2002 at 10:35 AM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Hipro, dont say it cant be done if you havent used it.
Set me free.
A64 3200 @ 2250mhz (10x225 @ 1.6v) | Chaintech ZNF3-150 | 2x 256mb Corsair 3200LL TwinX @ 2.5-2-2-7-12-16 | 256mb Albatron 5950 VIVO | 80gb DiamondMax 9 | Pioneer 106 | APC 2200RMI3U UPS
It can't be done nowdays....perhaps later on.....Originally posted by Sinnah
Hipro, dont say it cant be done if you havent used it.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Where's OPP when you need him...
My online trading evals, 100% positive!!!
Heatware 82-0-0, eBay 76-0-0
DFI BIOS Settings: 11 x 293 MHz, 510 XCEL2-LL 180-E-1.5-2-5-2-7-13-0-2-1-1-1552-E-A-0-A-A-7-F-A-16-E-16-7-E
New Project A Solar Powered PC Completed!
If I had my SWEET ASUS P4B533-E Mobo,this ram could do 257MHz(514MHz DDR) or even 258MHz(516MHz DDR),but I have stucked with this ABIT IT7-Max2 think for the time been and that's it.....Perhaps later on....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
The memory just cost too much. $200+ a pop. NO WAY!!!!
E6600 SL9S8 Malay
ASUS P5W64( no mods )
Mushkin (2 x 1GB) XP2-6400
ATI x850xt
2 x 150GB WD Raptor RAID
Thermalright Ultra-120
SilverStone ST56ZF 560W
Yes I understand the concern for fast memory timings on an AMD system, but we are talking p4 here.. Synch the ram with the fsb, and yes ram timings make a big difference, run your ram at balls to the wall speed, then no. (3:4 ratio with a high fsb)Originally posted by muzz
Well maybe not for some things it doesn't , but my 8RDA+ mem scores drop a good bit when I relax them, Sandra FWIW.
BTW Those are still some sweet scores in Sandra, most I could get was 3641/3426 . and thats pretty good for an AMD system. Of course it wasn't heavy benchworthy at that speed.
XMS3500c2
The people of SI = Kyle and Steve's whipping boy
K cool lefty................
Zen2 Has brought AMD back!
Posting Permissions
Reply With Quote
Bookmarks