i have tried sempron 2200+
SDA2200DUT3D
BIXJB 0432CPMW lock multi
with
dfi ultra-al
hynix-d43
any bosy know how to unlock it?i already tried the L5 mod but no change....
any comment?
i have tried sempron 2200+
SDA2200DUT3D
BIXJB 0432CPMW lock multi
with
dfi ultra-al
hynix-d43
any bosy know how to unlock it?i already tried the L5 mod but no change....
any comment?
If the Semprons are the same as the post week 39 2003 Bartons and Tbreds then if you have a NF2 board the L5 mod wont work as it only works on Via chipsets.
if VIA/SIS chipset mod L5 and u can change multi with CPUMSR
nforce2.. no body found it yet
ok then L5 not working...i tried to conecct the L3 pin and hoping that i can get 11 multi by coneccting them all...but its still no result...
any sugestion?
no hope... they are superlocked, no way to unlock them on an nf2 board...
That's funny, they're the same thing as a thoroughbred.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
socket a sempron =
Nothing but overpriced and underclocked thorton cores.
Asus G60VX : Intel T9600@3.299GHZ : Nvidia GTX260M @ STOCK/ .9v
just get a mobile barton ...
waste of money... another plot from AMD trying to squeeze as much money from their old k7 core...
Originally posted by slavik
just get a mobile barton ...
best thing he said! ebay that sempron, its just a locked crappy tbred and buy a moble barton and have fun!
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
i dont think its overprice in my country,it was even more cheaper than athlon xp.....
i allready have a barton mobile....
i just want to tried something new....
come on there must be some thing that i can do to make it unlok.....
Yes buy a Via board! Thats all you can do!
I'll be trying a 3100+ socket A once they are released. My bet is these will be the chips to get since they are more like the A64's little brother.
Think again, the best thing you´ll get in socket A is a barton. We would be damn lucky if we ever get a 90nm 256KB socket A cpu.Originally posted by Jeff
I'll be trying a 3100+ socket A once they are released. My bet is these will be the chips to get since they are more like the A64's little brother.
Sempron Socket A is a super locked TBred well Thorton prolly in most cases who knows they might all be a mix bag of 256KB L2 cache chips rebandaged. Knock them all you will they tear the Celeron up and thats all they are meant to do.
Prehaps you should think again, the sempron 3100 is a socket 754 and has a integrated memory contoller like the a64's just with the 64 bit instructions turned off
Originally posted by Eversor
Think again, the best thing you´ll get in socket A is a barton. We would be damn lucky if we ever get a 90nm 256KB socket A cpu.
Yes, the Sempron 3100+ is K8 based. No 64-bit and only 256KB L2 cache.
The 2800+/2200+ are K7 based. TBred's basically.
AMD XP-M 2600+ @ 2.4GHz (12x200) - 1.75v
DFI NFII Ultra Infinity Rev. A
2x1GB Crucial Ballistix Tracer PC4000 @ 400MHz 2-2-2-5 - 2.8v
BFG 7800GS @ 475/1550
OCZ Powerstream 600W (+3.6, +5.4, +12.6)
Swiftech MCX462-V-->92mm Tornado-->MCX159-A
nForce UDP 5.10
Forceware 97.44 XtremeG
Win XP Home SP2
Get a KT880 board and you can probably unlock it hehe
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
And you then can tell me how will amd put a cpu with a integrated memory controller running in a socket A board, wich already has one. Among other architectural differences.Originally posted by Super strokey
Prehaps you should think again, the sempron 3100 is a socket 754 and has a integrated memory contoller like the a64's just with the 64 bit instructions turned off
Hey Kalway, how´s FSB overclocking in your a7v880?
Does that board run 4 dimms nicelly?
This sure does look like a socket A 3100+...
http://store1.yimg.com/I/buyxg_1807_44313129
This board is really quirky. I needa get a barton to test it with because it doesn't play nicely over 200fsb with a 133 tbred. Perhaps a 166/200 fsb barton will play nicer.
I even tried L12 modding it to 200fsb and it still wouldn't play nicely with the tbred. It detected the 200fsb default, but still wouldn't play nicely. Everything except 3d was stable. Hopefully some BIOS fixes will make it nicer.
Since these are based on the thorton core, which is a hacked barton, they may play nicely. The board oc's to 230mhz fsb no sweat.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
There is a 3100+ Socket A (based on AXP cores) and a 3100+ Socket 754 (based on A64 cores).. i've been away a week and even I know that!Originally posted by Eversor
And you then can tell me how will amd put a cpu with a integrated memory controller running in a socket A board, wich already has one. Among other architectural differences.
Hey Kalway, how´s FSB overclocking in your a7v880?
Does that board run 4 dimms nicelly?
All along the watchtower the watchmen watch the eternal return.
That´s either a fake image, or that´s something like a 2166MHz barton.Originally posted by Jeff
This sure does look like a socket A 3100+...
http://store1.yimg.com/I/buyxg_1807_44313129
I didn´t say there wasn´t a 3100+ socket A sempron.
I was just saying you would never see a K8 running on a k7 board.
Anyway i think the fastest things well see in socket A (unfortunatelly) is a overclocked mobile athlon XP.
90nm shouldn´t come this way, but i sure like to get my hands on one. I was hoping a few months ago, that palermo was a 90nm Barton.
On the amd webpage i only found mention of a 3100 that was 754, if anyone can find the socket A one i would be interested to read about it
Where are you getting your information that 3100+ is Socket A as well?Originally posted by STEvil
There is a 3100+ Socket A (based on AXP cores) and a 3100+ Socket 754 (based on A64 cores).. i've been away a week and even I know that!
http://www.amd.com/us-en/Processors/..._11604,00.html
The frequency of the 3100+ here would indicate it is socket 754 only. Are AMD releasing a socket A version in the future which is as yet unannounced and if so why would it be a 3100+ and not a 3000+?
Posting Permissions
Reply With Quote
Bookmarks