MMM
Results 1 to 22 of 22

Thread: DDR333MHz @ DDR490MHz

  1. 07-28-2004, 09:53 AM #1
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51

    Talking DDR333MHz @ DDR494MHz

    Hello to everybody,

    At September 2003 I bought a NoName 512MB PC2700 DDR333MHz with Infineon chips. Five months later I started the burn-in of that module. I burn-in that module for over 500hours and take me about 3 months to finish it. The maximum voltage I gave to that module was 3v, from 2.5v (default). Now I buy a P4 3.0C and I start the burn-in again using 1:1 dividers on my Abit IS7-e. I don’t know if that is a record or impossible to do it on a NoName memory module, but I’m surprised from that memory…

    I cool the memory using the Tt Alu Heatsink and a Tt SmartFan2 8cm…

    Until now the rock stable result are the following:

















    Finally, but with some errors at, MemTest+ 1.20…




    Now I try to "catch" the 500MHz… (sorry for my bad English)
    Last edited by DMylonas; 07-29-2004 at 08:48 AM.
    Reply With Quote Reply With Quote
  2. 07-28-2004, 01:32 PM #2
    Vryada
    Vryada is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Argentina
    Posts
    127
    o_o whoa its some kinda strange that that memorys could get that fsb...
    2008 Rig:
    Intel Core 2 Extreme QX9650 - 4 GB OCZ Reaper HPC DDR3 1333 - EVGA 9800 GX2 KO 1GB - EVGA 132-CK-NF79-A1 790i Ultra SLI - Cooler Master Cosmos 1000 - Cooler Master Real Power Pro 1250W - WD Caviar SE16 WD6400AAKS - Tuniq Tower 120 - Dell SP2208WFP

    2006 Rig:
    AMD Athlon 64 3800+ X2 @ 2600 mhz - Asus A8N-SLI Platinum - OCZ 2*1GB Gold GX XTC PC4000 - OCZ Powerstream 520w - Gigabyte 7900GT 256 mb - Western Digital 250 GB Sata-2 16mb - Western Digital 200 GB Sata 8mb - Sound Blaster X-Fi Platinum - Zalman 7000-cu Led - Thermaltake Tsunami Dream - Vantec Nexus NXP-301
    Reply With Quote Reply With Quote
  3. 07-28-2004, 01:34 PM #3
    Jrocket
    Jrocket is offline
    Xtreme Enthusiast
    Join Date
    Nov 2003
    Posts
    672
    Nice oc, sometimes you can get lucky with the generic mems. Could you give us a picture of the heatsink attached to the memory?
    Fastest A64 3400+ in the world running at a nice 3359.59mhz:
    http://valid.x86-secret.com/show_oc?id=18225
    Reply With Quote Reply With Quote
  4. 07-28-2004, 02:11 PM #4
    Kriller
    Kriller is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Sweden
    Posts
    212
    245 Mhz is really good for one who is 166 @ stock....
    Dahl @ Techsweden.org
    Reply With Quote Reply With Quote
  5. 07-28-2004, 09:08 PM #5
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51
    I use the following heatsink, but i put AS Ceramique.

    http://www.thermaltake.com/support/i...emory/op01.htm

    A photo from PC Wizard 2004....


    Sorry for the bad photo, but my camera have only 1.3megapixel....
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: mem-heatsink.jpg  Views: 496  Size: 53.6 KB  ID: 14842  
    Last edited by DMylonas; 07-29-2004 at 06:51 AM.
    Reply With Quote Reply With Quote
  6. 07-28-2004, 10:15 PM #6
    Dagalidis
    Dagalidis is offline
    X.I.P.
    Join Date
    Jun 2003
    Location
    Patras - HELLAS
    Posts
    379
    Nice work dmylonas....
    Keep going and maybe you can reach DRR500.....
    E8400 4400(Q814A015 Wafer **91)@1.296 Vcore
    Q6600 (L733B458)@4054 1.5 Vcore
    ASUS P5Q Unmoded - 2X2 GB Corsair Dominator 8500
    Blaster AUDIGY 2
    Sound Blaster Megaworks Speakers 2.1 250D THX / 300 WRMS
    ATI 4850 512MB @750/1150 Stock cooling
    LG W2600HP-BF 26" Wide TFT Monitor (S-IPS)
    System Cooled by ThermalRight Ultra 120 Extreme
    System Powered By OCZ 600W




    Limits do NOT exist
    Reply With Quote Reply With Quote
  7. 07-29-2004, 06:48 AM #7
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51
    I'm back again... After a lot of burn-in.... My module run at 243MHz rock stable with 2.9v...

    Reply With Quote Reply With Quote
  8. 07-29-2004, 08:45 AM #8
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51
    My module can run at 247MHz - DDR494Mhz but after 1 minute in MemTest+ 1.20 it give me a lot of errors...



    I will continue the burn-in tomorrow morning.... Now i go for
    Reply With Quote Reply With Quote
  9. 07-29-2004, 12:28 PM #9
    Low
    Low is offline
    Registered User
    Join Date
    Apr 2004
    Location
    there where no fast internet is
    Posts
    10
    nice oc but do you sure thats no 6a chips or relabeled bh5/5 ?
    Pentium M 755 @ 2,3Ghz
    DFI 855GME-MGF
    2x 512MB Infineon 5-C
    3x 160GB Samsung SATA
    Hercules 9700 Pro
    Lian LI PC6070B

    Ein Elch ist der, der guckt wie ein Elch
    Reply With Quote Reply With Quote
  10. 07-29-2004, 12:30 PM #10
    STEvil
    STEvil is offline
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    Send a message via ICQ to STEvil Send a message via MSN to STEvil
    try 3-4-4-8

    All along the watchtower the watchmen watch the eternal return.
    Reply With Quote Reply With Quote
  11. 07-29-2004, 01:07 PM #11
    -=TriX=-
    -=TriX=- is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Central USA (Indiana)
    Posts
    229
    Send a message via ICQ to -=TriX=- Send a message via AIM to -=TriX=- Send a message via MSN to -=TriX=- Send a message via Yahoo to -=TriX=-
    that is some damn fine work, DMylonas! I used to have some generic PC2100 that did ~DDR440 w/ 2.9v. Didn't ever find out what chips were in them before I sold the suckers.
    Reply With Quote Reply With Quote
  12. 07-29-2004, 02:06 PM #12
    thephenom
    thephenom is offline
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Posts
    703
    too bad it's still in single channel.
    A wiseman once said, "If Bible proves the existence of God, then comic books prove the existence of Superheros."
    Reply With Quote Reply With Quote
  13. 07-29-2004, 02:57 PM #13
    STEvil
    STEvil is offline
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    Send a message via ICQ to STEvil Send a message via MSN to STEvil
    single channel is only 5-10mhz faster, if you are lucky.

    All along the watchtower the watchmen watch the eternal return.
    Reply With Quote Reply With Quote
  14. 07-29-2004, 03:01 PM #14
    Bennah
    Bennah is offline
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    Manchester (UK)
    Posts
    1,105
    Worth a go though

    How is the fan held over the ram? maybe I can do that with my OCZ EB when I get it, to cool it well with a 80mm fan. I would be trying for some high fsb.
    Reply With Quote Reply With Quote
  15. 07-29-2004, 03:27 PM #15
    Staphylococcus
    Staphylococcus is offline
    Registered User
    Join Date
    May 2004
    Location
    Club DFI Fanboy-in-Chief
    Posts
    10
    You want crazy RAM ?
    Here : -

    Last edited by Staphylococcus; 07-29-2004 at 03:29 PM.
    .
    - 9.5 x 261 (2476 MHz), 10 3 3 3 3 - Dual, 3900 - 3600 MB/s
    - 10 x 258 (2577 MHz), 10 2 2 2 3 - Dual, 3900 - 3600 MB/s
    - 10.5 x 248 (2600 MHz), 10 2 2 2 3 - Dual, 3750 - 3450 MB/s
    - Everyday use : 10 x 256 (2556 MHz)
    - Athlon XP-M 2400+ IQYHA 0346 on DFI Infinity A+ (BIOS 12/31 - Nvidia 4.27)
    - (1 x 256) Twinmos PC2100 and (2 x 256) OCZ PC3700-EL
    - Voltages : 2.0-core / 3.1 to 3.3-dimm / 1.8 to 1.9-dd / 1.6-agp
    - Delta 38 x 80mm on SLK-800-A + 10mm spacer - 32-50C Idle, 37-53C Stressed
    - Powercolor Radeon 9800 XT at stock (Cat 4.8), 3DMk 01/03 - 18,500 and 6,500
    Reply With Quote Reply With Quote
  16. 07-29-2004, 04:00 PM #16
    HawainPanda
    HawainPanda is offline
    Xtreme Addict
    Join Date
    May 2004
    Location
    Tucson, Arizona
    Posts
    1,160
    Send a message via AIM to HawainPanda
    holy crap that's nice
    Reply With Quote Reply With Quote
  17. 07-29-2004, 04:55 PM #17
    pik-ard v1.1
    pik-ard v1.1 is offline
    Xtreme Addict
    Join Date
    Jul 2003
    Location
    Eastern USA
    Posts
    1,737
    Send a message via ICQ to pik-ard v1.1 Send a message via AIM to pik-ard v1.1 Send a message via MSN to pik-ard v1.1 Send a message via Yahoo to pik-ard v1.1
    Originally posted by Staphylococcus
    You want crazy RAM ?
    Here : -
    cant see that picture nomatter what i do with it.

    EDIT: got it. for those that cant view it, go to this:

    http://www.bbpix.com/pix/264.jpg

    then delete the /pix/264.jpg part to bring you to:

    http://www.bbpix.com

    then hit back. that SHOULD let you view the picture.

    Last edited by pik-ard v1.1; 07-29-2004 at 05:01 PM.
    Reply With Quote Reply With Quote
  18. 07-29-2004, 08:53 PM #18
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51
    Originally posted by Low
    nice oc but do you sure thats no 6a chips or relabeled bh5/5 ?
    She has the following chips....



    ------------------------------------------
    Originally posted by STEvil
    try 3-4-4-8
    When i change the 5 to 8 the mobo gave me a lot of stupid beeps....

    -------------------------------------------
    Originally posted by Bennah
    Worth a go though

    How is the fan held over the ram? maybe I can do that with my OCZ EB when I get it, to cool it well with a 80mm fan. I would be trying for some high fsb.
    I have tape him on the psu to mobo main cable...
    Last edited by DMylonas; 07-29-2004 at 08:58 PM.
    Reply With Quote Reply With Quote
  19. 07-29-2004, 09:39 PM #19
    Mongoose420
    Mongoose420 is offline
    Xtreme Enthusiast
    Join Date
    Jun 2004
    Posts
    697
    i had a single 512meg dimm of samsung pc2700 that did 240 on my nf7-s 2.0 at 3.0vdimm. i thought it was odd at the time. I believe it would even 3d bench at 230mhz 11-3-3-2

    I5 2500k@4.7ghz--Asus P8Z68-VGen3--4x4gb Gskill Ripsaw 1600 --EVGA GTX570--Crucial m4 128gb SSD--Corsair TX950w--Corsair H100--Corsair 800D

    Scores are all 4+years old. updates soon.

    All scores are outdated
    24/7 3dmark06 6841
    24/7 3dmark05 13357
    24/7 3dmark03 22979
    Very Mild 3dmark01se 55225
    24/7 Aquamark 3 136020
    Reply With Quote Reply With Quote
  20. 07-30-2004, 09:50 AM #20
    MkzK
    MkzK is offline
    Registered User
    Join Date
    Mar 2004
    Location
    Miami, FL Usa
    Posts
    95
    here are mines Bt-5
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: 260mhz11.jpg  Views: 194  Size: 170.4 KB  ID: 14912  
    Mb : ASUSP4C800 DELUXE Intel i875 Fully moded
    P4 : 2.4M0ht @ 12*284 5:4 Dual Channel
    DDR : 256*2 pcr3200 2-3-3-6
    VGA : Ati Radeon9800xt 450/390
    Case : ThermalTake XaseR III
    P4 Cooling : SP-94 + 92*92 Vantec Tornado
    Reply With Quote Reply With Quote
  21. 07-30-2004, 12:20 PM #21
    DMylonas
    DMylonas is offline
    Registered User
    Join Date
    Mar 2004
    Location
    HELLAS
    Posts
    51
    "MkzK" your module is PC3200 DDR400Mhz.... The 260MHz - DR520MHz, are good.... Can you reach the 300MHz - DDR600MHz with that module?
    Reply With Quote Reply With Quote
  22. 07-30-2004, 12:29 PM #22
    MkzK
    MkzK is offline
    Registered User
    Join Date
    Mar 2004
    Location
    Miami, FL Usa
    Posts
    95
    i ll try their best.. until now thats what they can do i tryed 1 stick and it could make 270 fsb but reboot after a few seconds.. i ll try a better cooling they just have a heatspreader that i took off my old corsair ddr500 (they sucks hard)
    Mb : ASUSP4C800 DELUXE Intel i875 Fully moded
    P4 : 2.4M0ht @ 12*284 5:4 Dual Channel
    DDR : 256*2 pcr3200 2-3-3-6
    VGA : Ati Radeon9800xt 450/390
    Case : ThermalTake XaseR III
    P4 Cooling : SP-94 + 92*92 Vantec Tornado
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules